Federal Aviation Administration March 12, 2024 – Federal Register Recent Federal Regulation Documents

Amendment of Jet Route J-183, United States Area Navigation (RNAV) Routes Q-4 and T-254, and Very High Frequency Omnidirectional Range (VOR) Federal Airways V-76, V-161, V-565, and V-568; Establishment of RNAV Route T-499; and Revocation of VOR Federal Airway V-558 in the Vicinity of Llano, TX
Document Number: 2024-05180
Type: Proposed Rule
Date: 2024-03-12
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to amend Jet Route J-183, United States Area Navigation (RNAV) Routes Q-4 and T-254, and Very High Frequency Omnidirectional Range (VOR) Federal Airways V-76, V-161, V-565, and V- 568; establish RNAV Route T-499; and revoke VOR Federal Airway V-558. The FAA is proposing this action due to the planned decommissioning of the VOR portion of the Llano, TX (LLO), VOR/Tactical Air Navigation (VORTAC) navigational aid (NAVAID). The Llano VOR is being decommissioned in support of the FAA's VOR Minimum Operational Network (MON) program.
Airworthiness Directives; Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes
Document Number: 2024-05193
Type: Rule
Date: 2024-03-12
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A11 airplanes. This AD was prompted by a manufacturing issue with an electrical connector that may prevent the connector from self-locking. This AD requires removing the affected connector, installing a new connector, and testing the emergency power supply units (EPSUs), as specified in a Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Deutsche Aircraft GmbH (Type Certificate Previously Held by 328 Support Services GmbH; AvCraft Aerospace GmbH; Fairchild Dornier GmbH; Dornier Luftahrt GmbH) Airplanes
Document Number: 2024-05192
Type: Rule
Date: 2024-03-12
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for all Deutsche Aircraft GmbH Model 328-100 and 328-300 airplanes. This AD was prompted by operator reports of worn and ruptured bonding straps inside the feeder wing tanks and in both outer and inner wing tanks. This AD requires a one-time detailed inspection of each affected part, and applicable corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
Document Number: 2024-05191
Type: Rule
Date: 2024-03-12
Agency: Federal Aviation Administration, Department of Transportation
The FAA is superseding Airworthiness Directive (AD) 2021-20- 13, which applied to certain Bombardier, Inc., Model CL-600-2B16 (604 Variant) airplanes. AD 2021-20-13 required repetitive lubrication and repetitive detailed visual inspections (DVI) and non-destructive test (NDT) inspections of the main landing gear (MLG) shock strut lower pins, and replacement if necessary. This AD continues to require the lubrication and inspections specified in AD 2021-20-13 until the MLG shock strut assembly is modified by replacing the trailing arm bushing and installing new dynamic joint components. This AD was prompted by a new design solution for this potential failure of the shock strut lower pin. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
Document Number: 2024-05190
Type: Rule
Date: 2024-03-12
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by reports of corrosion on lavatory floor fittings at various locations. This AD requires repetitive general visual inspections of the affected parts, applicable corrective actions, and reporting of the inspection results, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.