Federal Aviation Administration June 11, 2007 – Federal Register Recent Federal Regulation Documents

Airworthiness Directives; Bombardier Model DHC-8-102, -103, -106, -201, -202, -301, -311, and -315 Airplanes
Document Number: E7-11199
Type: Proposed Rule
Date: 2007-06-11
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Airbus Model A300F4-605R and A300F4-622R Airplanes
Document Number: E7-11198
Type: Proposed Rule
Date: 2007-06-11
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Special Conditions: Boeing Model 787-8 Airplane; Crashworthiness
Document Number: E7-11153
Type: Proposed Rule
Date: 2007-06-11
Agency: Federal Aviation Administration, Department of Transportation
This notice proposes special conditions for the Boeing Model 787-8 airplane. This airplane will have novel or unusual design features when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. These novel or unusual design features are associated with carbon fiber reinforced plastic used in the construction of the fuselage. For these design features, the applicable airworthiness regulations do not contain adequate or appropriate safety standards for impact response characteristics to ensure survivable crashworthiness. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards. Additional special conditions will be issued for other novel or unusual design features of the Boeing 787-8 airplanes.
Special Conditions: Aviation Technology Group (ATG), Inc.; Javelin Model 100 Series Airplane; Acrobatic Spins
Document Number: E7-11152
Type: Rule
Date: 2007-06-11
Agency: Federal Aviation Administration, Department of Transportation
These special conditions are issued for the Aviation Technology Group (ATG) Javelin Model 100 Series airplane. This airplane will have a novel or unusual design feature(s) associated with acrobatic spin recovery requirements. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Special Conditions: Boeing Model 787-8 Airplane; Tire Debris Penetration of Fuel Tank Structure
Document Number: E7-11150
Type: Proposed Rule
Date: 2007-06-11
Agency: Federal Aviation Administration, Department of Transportation
This notice proposes special conditions for the Boeing Model 787-8 airplane. This airplane will have novel or unusual design features when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. These design features include wing fuel tanks constructed of carbon fiber composite materials. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards. Additional special conditions will be issued for other novel or unusual design features of the Boeing Model 787-8 airplanes.
Airworthiness Directives; Airbus Model A330 and A340 Airplanes
Document Number: E7-10993
Type: Rule
Date: 2007-06-11
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Dassault Model Mystere-Falcon 50 Airplanes
Document Number: E7-10991
Type: Rule
Date: 2007-06-11
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Boeing Model 727 Airplanes
Document Number: E7-10983
Type: Rule
Date: 2007-06-11
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for all Boeing Model 727 airplanes. This AD requires repetitive inspections for cracks of the body skin, doubler, and bear strap at the forward edge of the upper and lower hinge cutouts of the forward entry door, related investigative actions, and corrective action if necessary. This AD also requires a preventive modification. This AD results from reports of skin and bear strap cracks at hinge cutouts of the forward entry door. We are issuing this AD to detect and correct cracks in the skin, doubler, and bear strap at the hinge cutouts of the forward entry door, which could result in rapid decompression of the airplane.
Airworthiness Directives; Boeing Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-300, 747-400, 747-400D, 747SR, and 747SP Series Airplanes
Document Number: E7-10982
Type: Rule
Date: 2007-06-11
Agency: Federal Aviation Administration, Department of Transportation
The FAA is superseding an existing airworthiness directive (AD), which applies to certain Boeing Model 747 airplanes. That AD currently requires repetitive inspections to detect cracks and/or corrosion of the girt bar support fitting at certain main entry doors (MED), and repair or replacement of the support fitting. The existing AD also provides for various terminating actions for the repetitive inspections. This new AD requires the following additional actions: An inspection, for certain airplanes, for correct installation of square and conical washers in the girt bar support fitting; an inspection, for certain other airplanes, to determine if the washers are installed; and related investigative and corrective action if necessary. This AD results from a report that the square and conical washers may be installed incorrectly in the girt bar support fitting on airplanes on which the support fitting was repaired or replaced in accordance with the requirements of the existing AD. We are issuing this AD to detect and correct corrosion of the girt bar support fitting, which could result in separation of the escape slide from the lower door sill during deployment, and subsequently prevent proper operation of the escape slides at the main entry doors during an emergency. We are also issuing this AD to detect and correct incorrect installation of the square and conical washers in the girt bar support fitting, which could result in failure of the escape slide when deployed.
Airworthiness Directives; Viking Air Limited (Type Certificate No. A-806 Previously Held by deHavilland Inc.) Models DHC-2 Mk. I, DHC-2 Mk. II, and DHC-2 Mk. III Airplanes
Document Number: E7-10981
Type: Rule
Date: 2007-06-11
Agency: Federal Aviation Administration, Department of Transportation
We are superseding an existing airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Hawker Beechcraft Corporation (Type Certificate (TC) No. 3A20 and TC No. A24CE Formerly Held by Raytheon Aircraft Corporation and Beech) Models C90A, B200, B200C, B300, and B300C Airplanes
Document Number: E7-10758
Type: Rule
Date: 2007-06-11
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) that supersedes AD 2006-23-02, which applies to certain Hawker Beechcraft Corporation (HBC) (Type Certificate (TC) No. 3A20 and TC No. A24CE formerly held by Raytheon Aircraft Corporation and Beech) Models C90A, B200, B200C, B300, and B300C airplanes. AD 2006-23-02 currently requires you to inspect the flight controls for improper assembly or damage, and if any improperly assembled or damaged flight controls are found, take corrective action. Since we issued AD 2006-23-02, we have determined the need to add airplane serial numbers that were not previously included in the applicability. Consequently, this AD retains the actions of AD 2006-23-02 and adds airplane serial numbers to the applicability. We are issuing this AD to detect and correct improperly assembled or damaged flight controls, which could result in an unsafe condition by reducing capabilities of the flight controls and lead to loss of control.
Airworthiness Directives; Diamond Aircraft Industries GmbH Model DA 42 Airplanes
Document Number: E7-10744
Type: Rule
Date: 2007-06-11
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
RTCA Program Management Committee
Document Number: 07-2864
Type: Notice
Date: 2007-06-11
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of a meeting of the RTCA Program Management Committee.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.