Federal Aviation Administration December 26, 2006 – Federal Register Recent Federal Regulation Documents
Results 1 - 3 of 3
Airworthiness Directives; Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. This proposed AD would require repetitive inspections of the bolts that attach the exhaust nozzle to the aft engine flange to determine if any bolts are missing or fractured, and replacement of the existing bolts with new, improved bolts. This proposed AD results from reports of the engine exhaust nozzle and fairing departing from the airplane in flight due to missing attachment bolts. We are proposing this AD to detect and correct missing or fractured attachment bolts, which could lead to the loss of an engine exhaust nozzle during flight and consequent structural damage to the airplane and hazard to people or property on the ground. Damage to the airplane could cause the airplane to yaw and result in reduced controllability of the airplane.
Airworthiness Directives; EADS SOCATA Model TBM 700 Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as two fatigue failures of flap carriage rollpins occurred on in-service airplanes. The proposed AD would require actions that are intended to address the unsafe condition described in the MCAI.
Airworthiness Directives; Alpha Aviation Design Limited (Type Certificate No. A48EU formerly held by APEX Aircraft and AVIONS PIERRE ROBIN), Model R2160 Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Alpha Aviation Model R2160 airplanes. This AD requires you to inspect the fuel pressure indication system for leakage at the end of the adapter in the fuel pressure indication system. This AD results from the possibility of fuel leakage at the end of the adapter in the fuel pressure indication system. We are issuing this AD to detect, correct, and prevent fuel leaks in the fuel pressure indicating system. This failure could allow fuel to leak near the exhaust manifold and lead to a fire.