Environmental Protection Agency December 26, 2007 – Federal Register Recent Federal Regulation Documents

Etoxazole; Pesticide Tolerance
Document Number: E7-24983
Type: Rule
Date: 2007-12-26
Agency: Environmental Protection Agency
This regulation establishes tolerances for residues of etoxazole in or on cherry; hop, dried cones; and vegetable, cucurbit subgroup 9A. The Interregional Research Project No. 4 (IR-4) requested these tolerances under the Federal Food, Drug, and Cosmetic Act (FFDCA).
Aspergillus Flavus
Document Number: E7-24979
Type: Rule
Date: 2007-12-26
Agency: Environmental Protection Agency
This regulation establishes a temporary exemption from the requirement of a tolerance for residues of the Aspergillus flavus AF36 on corn when applied/used before corn tasseling occurs. Arizona Cotton Research and Protection Council submitted a petition to EPA under the Federal Food, Drug, and Cosmetic Act (FFDCA), as amended by the Food Quality Protection Act of 1996 (FQPA), requesting the temporary tolerance exemption. This regulation eliminates the need to establish a maximum permissible level for residues of Aspergillus flavus AF36. The temporary tolerance exemption expires on December 31, 2011.
Partial Removal of Direct Final Rule and Revision of the Nonroad Diesel Technical Amendments and Tier 3 Technical Relief Provision
Document Number: E7-24976
Type: Rule
Date: 2007-12-26
Agency: Environmental Protection Agency
Because EPA received adverse comment, we are making a partial withdrawal and revision of the direct final rule for ``Nonroad Diesel Technical Amendments and Tier 3 Technical Relief Provision'' published on September 18, 2007.
Approval and Promulgation of State Plans for Designated Facilities and Pollutants; Kansas; Clean Air Mercury Rule
Document Number: E7-24967
Type: Proposed Rule
Date: 2007-12-26
Agency: Environmental Protection Agency
EPA is proposing to approve the State Plan submitted by Kansas on June 19, 2007. The plan addresses the requirements of EPA's Clean Air Mercury Rule (CAMR), promulgated on May 18, 2005, and subsequently revised on June 9, 2006. EPA is proposing to determine that the submitted State Plan fully meets the CAMR requirements for Kansas. CAMR requires States to regulate emissions of mercury (Hg) from large coal-fired electric generating units (EGUs). CAMR establishes State budgets for annual EGU Hg emissions and requires States to submit State Plans to ensure that annual EGU Hg emissions will not exceed the applicable State budget. States have the flexibility to choose which control measures to adopt to achieve the budgets, including participating in the EPA-administered CAMR cap-and-trade program. In the State Plan that EPA is proposing to approve, Kansas would meet CAMR requirements by participating in the EPA trading program.
Approval and Promulgation of State Plans for Designated Facilities and Pollutants; Iowa; Clean Air Mercury Rule
Document Number: E7-24962
Type: Rule
Date: 2007-12-26
Agency: Environmental Protection Agency
EPA is taking final action to approve the State Plan submitted by Iowa on August 15, 2006, and updates to rules submitted on April 26, 2007. The plan addresses the requirements of EPA's Clean Air Mercury Rule (CAMR), promulgated on May 18, 2005, and subsequently revised on June 9, 2006. EPA has determined that the submitted State Plan fully meets the CAMR requirements for Iowa. CAMR requires States to regulate emissions of mercury (Hg) from large coal-fired electric generating units (EGUs). CAMR establishes State budgets for annual EGU Hg emissions and requires States to submit State Plans to ensure that annual EGU Hg emissions will not exceed the applicable State budget. States have the flexibility to choose which control measures to adopt to achieve the budgets, including participating in the EPA-administered CAMR cap-and-trade program. In the State Plan that EPA is approving today, Iowa has met the CAMR requirements by electing to participate in the EPA trading program.
Approval and Promulgation of Implementation Plans and Designation of Areas for Air Quality Planning Purposes; North Carolina; Redesignation of the Raleigh-Durham-Chapel Hill 8-Hour Ozone Nonattainment Area to Attainment for Ozone
Document Number: E7-24959
Type: Rule
Date: 2007-12-26
Agency: Environmental Protection Agency
EPA is taking final action to approve a request submitted on June 7, 2007, from the State of North Carolina, through the North Carolina Department of Environment and Natural Resources (NCDENR), to redesignate the Raleigh-Durham-Chapel Hill 8-hour ozone nonattainment area to attainment for the 8-hour ozone National Ambient Air Quality Standard (``NAAQS'', or ``standard''). The Raleigh-Durham-Chapel Hill 8-hour ozone area is comprised of Durham, Franklin, Granville, Johnston, Orange, Person and Wake Counties in their entireties, and Baldwin, Center, New Hope and Williams Townships in Chatham County in North Carolina (hereafter referred to as the ``Triangle Area''). EPA's approval of the redesignation request is based on the determination that North Carolina has demonstrated that the Triangle Area has met the criteria for redesignation to attainment specified in the Clean Air Act (CAA), including the determination that the Triangle Area has attained the 8-hour ozone standard. Additionally, EPA is approving a revision to the North Carolina State Implementation Plan (SIP) including the 8-hour ozone maintenance plan for the Triangle Area that contains the new subarea 2008 and 2017 motor vehicle emission budgets (MVEBs) for nitrogen oxides (NOX), and an insignificance determination for volatile organic compounds (VOCs) contribution from motor vehicle emissions to the 8-hour ozone pollution in the entire Triangle Area. Through this action, EPA is also finding the new subarea 2008 and 2017 NOX MVEBs, and the VOC insignificance determination, adequate for the purposes of transportation conformity. The above described actions were proposed for public comment on October 3, 2007; no comments were received. EPA is also making corrections to inadvertent errors made in the proposed rulemaking published on October 3, 2007, (72 FR 56312) to Tables 1, 6, and 7.
National Emission Standards for Hazardous Air Pollutants for Area Sources: Clay Ceramics Manufacturing, Glass Manufacturing, and Secondary Nonferrous Metals Processing
Document Number: E7-24720
Type: Rule
Date: 2007-12-26
Agency: Environmental Protection Agency
EPA is issuing national emission standards for the Clay Ceramics Manufacturing, Glass Manufacturing, and Secondary Nonferrous Metals Processing area source categories. Each of these three final emissions standards reflects the generally available control technology or management practices used by sources within the respective area source category.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.