Pipeline and Hazardous Materials Safety Administration September 14, 2005 – Federal Register Recent Federal Regulation Documents
Results 1 - 3 of 3
Safety Advisory: Unauthorized Marking of Compressed Gas Cylinders
This is to notify the public that PHMSA is investigating the unauthorized marking of high- and low-pressure compressed gas cylinders, including fire extinguishers, oxygen cylinders, and self- contained breathing apparatus, by All-Out Fire Equipment Co., Inc. The company is located at 385 High Street, Holbrook, NY. On June 15, 2004, two inspectors from the Office of Hazardous Materials Enforcement (OHMEEastern Region) conducted a compliance inspection of All-Out Fire Equipment Co., Inc. During the inspection, PHMSA obtained evidence that All-Out Fire Equipment Co., Inc. had marked, certified, and returned to service an undetermined number of cylinders as being properly tested in accordance with the Hazardous Materials Regulations (HMR), without conducting the required hydrostatic testing of those cylinders. All-Out Fire Equipment Co., Inc.'s retest records revealed that, from November 2003 through June 2004, All-Out Fire Equipment Co., Inc. had returned to service hundreds of cylinders without hydrostatically testing them. In addition, PHMSA found no records of hydrostatic testing for cylinders All-Out Fire Equipment Co., Inc. had requalified prior to November 2003. This and other evidence obtained by PHMSA indicates that All-Out Fire Equipment Co., Inc. also failed to perform required hydrostatic testing on cylinders it requalified prior to November 2003. Hydrostatic retesting and visual inspection, conducted as prescribed in the HMR, are used to verify the structural integrity of a cylinder. If the hydrostatic retesting and visual inspection are not performed in accordance with the HMR, a cylinder with compromised structural integrity may be returned to service when it should have been condemned in the first place. Extensive property damage, serious personal injury, or death could result from rupture of a cylinder. Cylinders that have not been retested in accordance with the HMR may not be charged or filled with compressed gas or other hazardous material.
Notice of applications for modification of exemption.
In accordance with the procedures governing the application for, and the processing of, exemptions from the Department of Transportation's Hazardous Material Regulations (49 CFR part 107, subpart B), notice is hereby given that the Office of Hazardous Materials Safety has received the application described herein. This notice is abbreviated to expedite docketing and public notice. Because the sections affected, modes of transportation, and the nature of application have been shown in earlier Federal Register publications, they are not repeated here. Requests of modifications of exemptions (e.g. to provide for additional hazardous materials, packaging design changes, additional mode of transportation, etc.) are described in footnotes to the application number. Application numbers with the suffix ``M'' denote a modification request. Applications have been separated from the new application for exemption to facilitate processing.
Office of Hazardous Materials Safety; Notice of Application for Exemptions
In accordance with the procedures governing the application for, and the processing of, exemptions from the Department of Transportation's Hazardous Material Regulations (49 CFR part 107, subpart B), notice is hereby given that the Office of Hazardous Materials Safety has received the application described herein. Each mode of transportation for which a particular exemption is requested is indicated by a number in the ``Nature of Application'' portion of the table below as follows: 1Motor vehicle, 2Rail freight, 3Cargo vessel, 4Cargo aircraft only, 5Passenger-carrying aircraft.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.