Federal Aviation Administration March 3, 2023 – Federal Register Recent Federal Regulation Documents
Results 1 - 8 of 8
Airworthiness Directives; MHI RJ Aviation ULC (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all MHI RJ Aviation ULC Model CL-600-2C10 (Regional Jet Series 700, 701 & 702), CL-600-2C11 (Regional Jet Series 550), CL-600-2D15 (Regional Jet Series 705), CL-600-2D24 (Regional Jet Series 900), and CL-600-2E25 (Regional Jet Series 1000) airplanes. This proposed AD was prompted by a determination that new restrictive airworthiness limitations are necessary. This proposed AD would require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-2A12 airplanes. This AD was prompted by report that the passenger door functional test engineering requirements (FTERs) were not fully accomplished on several airplanes. This AD requires measuring the passenger door steps, passenger door gaps, and passenger door stops rigging, and re-adjusting the door if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Gulfstream Aerospace LP Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Gulfstream Aerospace LP Model Gulfstream G280 airplanes. This AD was prompted by a determination that the existing wet runway performance tables in the airplane flight manual (AFM) may not provide an acceptable level of safety. This AD requires revising the existing AFM to incorporate new wet runway performance tables, as specified in a Civil Aviation Authority of Israel (CAAI) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Special Conditions: Airbus SAS A320-200 Series Model A320-251N, -252N, -253N, -271N, -272N, -273N Airplanes and A321-200 Series Model A321-251NX, -252NX, -253NX, -271NX, -272NX Airplanes; Flight Attendant Seat Mounted on Movable Interior Structure
These special conditions are issued for the Airbus SAS (Airbus) A320-200 Series Model -251N, -252N, -253N, -271N, -272N, -273N (known as A320neo) airplanes and A321-200 Series Model -251NX, -252NX, -253NX, -271NX, -272NX (known as A321neo) airplanes. The airplanes have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. This design feature is flight attendant seats mounted on movable lavatory doors. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Airworthiness Directives; Fokker Services B.V. Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Fokker Services B.V. Model F28 Mark 0070 and 0100 airplanes. This AD was prompted by reports of cracks at the upper and lower fastener holes of a repair plate in the stubwing, which had been applied to repair heat damage. This AD requires a one-time inspection of the fuselage skin in the stubwing bay area to determine if a heat damage repair plate is installed, an inspection of repaired areas for cracking, and applicable corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Embraer S.A. (Type Certificate Previously Held by Yaborã Indústria Aeronáutica S.A.; Embraer S.A.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Embraer S.A. Model ERJ 190-300 airplanes. This AD was prompted by failed lockwires on the attachment of the left-hand main landing gear (MLG) trunnion bearing to spar 2. This AD requires inspecting for damage of the left- and right-hand MLG trunnion bearing attaching parts, replacing damaged parts, and modifying the MLG trunnion bearing attaching parts, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by an in-service inspection that found overhead storage compartment (OHSC) crash rods that were disconnected. This AD requires a one-time detailed inspection of the OHSC crash rods and, depending on findings, corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Embraer S.A. (Type Certificate Previously Held by Yaborã Indústria Aeronáutica S.A.; Embraer S.A.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Embraer S.A. Model ERJ 170 airplanes. This AD was prompted by a report of uncommanded setting of the barometric reference in both primary flight displays (PFDs) due to the architecture of data communication of the Control I/O modules, which interconnect the display controllers to the air data system. This AD requires installing updated Primus EPIC software, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
