Federal Aviation Administration September 27, 2021 – Federal Register Recent Federal Regulation Documents
Results 1 - 10 of 10
Airworthiness Directives; PZL Swidnik S.A. Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain PZL Swidnik S.A. Model PZL W-3A helicopters. This AD was prompted by a report that displaced teeth were detected on the moveable assemblies of a main rotor (MR) blade droop stop. This AD requires removing from service the moveable assemblies from each affected MR blade droop stop and prohibits installation of an affected MR blade droop stop and moveable assemblies of affected MR blade droop stops. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bell Textron Canada Limited (Type Certificate Previously Held by Bell Helicopter Textron Canada Limited) Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Bell Textron Canada Limited (Bell) Model 429 helicopters. This AD was prompted by reports of tail rotor gearbox assemblies found loose on the gearbox support. This AD requires repetitive torque checks of the tail rotor gearbox attachment hardware, and corrective action if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; PZL Swidnik S.A. Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain PZL Swidnik S.A. Model PZL W-3A helicopters. This AD was prompted by a report of fractured hoist carrying assembly bracket (bracket) bolts. This AD requires repetitively inspecting the sealing compound of certain part-numbered brackets, and depending on the results, removing the hoist or removing the hardware from service and installing new hardware. As an option to replacing the bolts, this AD allows deactivating the hoist, turning the circuit breaker panel switches to the OFF position, installing inoperative placards on the circuit breaker panel switches, and before each flight, inspecting the sealing compound. This AD also establishes a life limit for the bracket bolts, and prohibits installing an affected hoist or an affected bracket and hoist unless the actions required by this AD have been accomplished. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Leonardo S.p.a. Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Leonardo S.p.a. Model AB139 and AW139 helicopters. This AD was prompted by a report that, during a post-flight inspection of an in- service helicopter, a tail rotor slider assembly was found fractured, and the bushing and the actuator rod in the tail rotor servo were partially damaged. This AD requires an inspection of the rail rotor tail rotor slider assembly for corrosion and signs of circumferential refinishing and, depending on the findings, replacement of the tail rotor slider assembly with a serviceable part or repetitive inspections of the tail rotor slider assembly for corrosion and signs of circumferential refinishing, as specified in a European Aviation Safety Agency (now European Union Aviation Safety Agency) (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Leonardo S.p.a. Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Leonardo S.p.a. Model AB412 and AB412 EP helicopters. This AD was prompted by a report of a cracked hoist support assembly having a certain part number. This AD requires a one-time inspection of the hoist support assembly and, depending on the findings, replacement with a serviceable part, as specified in a European Union Aviation Safety Agency (EASA) Emergency AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Leonardo S.p.a. Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Leonardo S.p.a. Model AB139 and AW139 helicopters. This AD was prompted by reports of spurious in-flight disconnections of the automatic flight control system (AFCS). This AD requires updating certain ``Primus Epic'' system software, as specified in a European Aviation Safety Agency (now European Union Aviation Safety Agency) (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Model EC130B4 and EC130T2 helicopters. This AD was prompted by a report of a jammed pilot collective pitch lever (collective). This AD requires inspecting the collective for proper engagement of the locking pin. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This proposed AD was prompted by reports of internal corrosion on the inboard flaps found prior to regularly scheduled maintenance checks. This proposed AD would require revising the existing maintenance or inspection program, as applicable, to incorporate a certain aircraft maintenance manual (AMM) task. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Helicopters
The FAA is superseding Airworthiness Directive (AD) 2021-16- 02, which applied to certain Airbus Helicopters Model SA330J, AS332C, AS332L, AS332L1, AS332L2, and EC225LP helicopters. AD 2021-16-02 required inspecting the locking safety mechanism of the left-hand (LH) side stairway door handle and depending on the results, corrective action. AD 2021-16-02 also required modifying that locking safety mechanism. This AD retains the requirements in AD 2021-16-02, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference, and clarifies a certain exception. This AD was prompted by the need to clarify that exception. The FAA is issuing this AD to address the unsafe condition on these products.
Special Conditions: magniX USA, Inc., magni350 and magni650 Model Engines; Electric Engine Airworthiness Standards
These special conditions are issued for the magniX USA, Inc., (magniX), magni350 and magni650 model engines, which operate using electrical technology installed on the aircraft for use as an aircraft engine. These engines have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards applicable to aircraft engines. This design feature is an electric motor, controller, and high-voltage systems as the primary source of propulsion for an aircraft. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
