Federal Aviation Administration June 10, 2021 – Federal Register Recent Federal Regulation Documents

The FAA proposes to adopt a new airworthiness directive (AD) for certain Gulfstream Aerospace LP Model Gulfstream G280 airplanes. This proposed AD was prompted by a report that during full-scale fatigue testing, a crack was found in the area of the attachment of the wing rib 0 to the front spar. This proposed AD would require non-destructive testing on the forward (front) spar vertical stiffener and rib 0 for any cracking, installation of a doubler to the forward (front) spar and rib 0 attachment, and repair if necessary, as specified in a Civil Aviation Authority of Israel (CAAI) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.

The FAA is adopting a new airworthiness directive (AD) for all Pilatus Aircraft Ltd. (Pilatus) Model PC-24 airplanes. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as the need to revise certain airworthiness limitations and certification maintenance instructions. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is superseding Airworthiness Directive (AD) 79-01-03, which applied to certain Piper Aircraft, Inc. (Piper) Model PA-36-285 airplanes, and AD 83-20-03, which applied to Piper Models PA-36-285, PA-36-300, and PA-36-375 airplanes. AD 79-01-03 required repetitive inspections of the spar carry through assembly until replaced with a different part numbered spar carry through assembly. AD 83-20-03 established life limits for the wing spar structural components. This AD retains the requirements in AD 79-01-03 and AD 83-20-03 and requires the spar carry through assembly inspection from AD 79-01-03 for additional airplanes and adds life limits for certain wing structural components previously omitted from AD 83-20-03 for certain serial numbered airplanes. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is superseding Airworthiness Directive (AD) 2013-20-13 for certain Bell Helicopter Textron Canada Limited (now Bell Textron Canada Limited) (Bell) Model 206B and 206L helicopters. AD 2013-20-13 required installing a placard beneath the engine power dual tachometer and revising the Operating Limitations section of the existing Rotorcraft Flight Manual (RFM) for your helicopter. This AD was prompted by the engine manufacturer expanding the RPM (N2) steady-state operation avoidance range limits. This AD retains certain requirements of AD 2013-20-13, and requires revising certain sections of the existing RFM for your helicopter and installing or replacing a placard. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA proposes to adopt a new airworthiness directive (AD) for certain Bell Textron Inc. (type certificate previously held by Bell Helicopter Textron Inc.) (Bell) Model 205B helicopters. This proposed AD was prompted by a notification of certain parts needing a life limit. This proposed AD would require determining the total hours time- in-service (TIS) of certain part numbered main rotor grip assemblies (grip assemblies), establishing a life limit for certain part-numbered grip assemblies, removing from service any grip assembly that has reached or exceeded its retirement life, creating a component history card, and removing any grip assembly from service before reaching its retirement life. This proposed AD would also prohibit installing certain grip assemblies unless the life limit was established in accordance with this proposed AD. The FAA is proposing this AD to address the unsafe condition on these products.

The FAA adopts final regulations for the use of an electronic Pilot Records Database (PRD) and implements statutory requirements to facilitate the sharing of pilot records among air carriers and other operators in an electronic data system managed by the FAA. This final rule requires air carriers, specific operators holding out to the public, entities conducting public aircraft operations, air tour operators, fractional ownerships, and corporate flight departments to enter relevant data on individuals employed as pilots into the PRD. In addition, this rule identifies the air carriers and operators required to access the PRD to evaluate the available data for each pilot candidate prior to making a hiring decision.