Federal Aviation Administration March 30, 2020 – Federal Register Recent Federal Regulation Documents
Results 1 - 11 of 11
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 757-200, -200PF, -200CB, and -300 series airplanes. This AD was prompted by a report that during a maintenance check an operator discovered cracking of the aft cargo compartment frames in the station 1460 frame web and inner chord between certain stringers. This AD requires an inspection of the fuselage frames for any existing repair, repetitive surface high frequency eddy current (HFEC) inspections of the fuselage frames with a cargo liner support channel for any cracking, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain De Havilland Aircraft of Canada Limited Model DHC-8-400 series airplanes. This AD was prompted by reports of wear on fuel couplings, bonding springs, and sleeves as well as fuel tube end ferrules and fuel component end ferrules. This AD requires repetitive inspections of certain parts for discrepancies that meet specified criteria, and replacement as necessary; repetitive inspections of certain parts for damage and wear, and rework of parts; and electrical bonding checks of certain couplings. This AD also requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. For certain airplanes, this AD allows a modification that would terminate the repetitive inspections. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A318 series airplanes; Model A319-111, -112, - 113, -114, -115, -131, -132, and -133 airplanes; Model A320-211, -212, -214, -216, -231, -232, and -233 airplanes; and Model A321-111, -112, - 131, -211, -212, -213, -231, and -232 airplanes. This AD was prompted by a report of cracking found on the frame of the right-hand side sliding window in the flight deck. This AD requires repetitive inspections for cracking of the vertical stiffeners of the left- and right-hand sides of the window frames and corrective actions if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is withdrawing a notice of proposed rulemaking (NPRM) that proposed to adopt a new airworthiness directive (AD) that would have applied to certain The Boeing Company Model 787-8 and 787-9 airplanes. The NPRM was prompted by a report that a passenger entry door assist handle became detached during use. The NPRM would have required a detailed inspection of all passenger and service entry door assist handles for correct installation and applicable on-condition actions. Since issuance of the NPRM, we determined that the service information is ineffective in addressing the unsafe condition and must be revised. Accordingly, the NPRM is withdrawn.
Airworthiness Directives; Kidde Aerospace & Defense
The FAA proposes to adopt a new airworthiness directive (AD) for Kidde Aerospace & Defense cargo fire extinguisher halon bottles installed on various transport category airplanes. This proposed AD was prompted by a report indicating that certain cargo fire extinguisher halon bottles installed in the cargo compartment had low charge pressure. This proposed AD would require an inspection to determine the part number and serial number of the cargo fire extinguisher halon bottles and replacement of affected parts with serviceable parts. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2015-13-06, which applies to certain The Boeing Company Model 747-400 and 747-400F series airplanes. AD 2015-13-06 requires repetitive inspections of the longeron extension fittings for cracking, repetitive high frequency eddy current (HFEC) inspections of any modified, repaired, or replaced longeron extension fitting for cracking, and applicable on-condition actions. Since the FAA issued AD 2015-13-06, the FAA has determined that additional airplanes are affected by the identified unsafe condition. This proposed AD would retain the requirements of AD 2015-13-06 and include additional airplanes in the applicability. For those additional airplanes, this proposed AD would require only repetitive inspections of the longeron extension fittings for cracking and repair if necessary. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by reports of passenger door girt bar fitting assembly safety hooks being stuck in the upward position. This AD requires repetitive detailed inspections of girt bar fitting assemblies, repetitive greasing of girt bar fitting assembly bushes, and, depending on findings, accomplishment of applicable corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Dassault Aviation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2018-19-27 and AD 2014-16-12, which applied to certain Dassault Aviation Model FALCON 2000EX airplanes. AD 2018-19-27 and AD 2014-16-12 required revising the existing maintenance or inspection program, as applicable, to incorporate new maintenance requirements and airworthiness limitations. This AD retains those actions and requires revising the existing maintenance or inspection program, as applicable, to incorporate additional new or more restrictive airworthiness limitations. This AD was prompted by the FAA's determination that new or more restrictive airworthiness limitations are necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8 airplanes. This AD was prompted by a report of failure of a wing strut leak test due to a missing bolt on the firewall. This AD requires a one-time leak test of the strut upper spar areas for the left and right wing struts, and corrective action if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG (Type Certificate Previously Held by Rolls-Royce plc) Turbofan Engines.
The FAA proposes to adopt a new airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd. & Co KG Trent XWB-75, Trent XWB- 79, Trent XWB-79B, and Trent XWB-84 model turbofan engines. This proposed AD was prompted by reports of a lack of weld fusion on the resistance welding during manufacturing, which could result in air leakage through the low-pressure turbine (LPT) rear support seal panel assembly (``LPT seal panel''). This proposed AD would require replacement of the LPT seal panel. The FAA is proposing this AD to address the unsafe condition on these products.
Pilot Records Database
The FAA is proposing to require the use of an electronic Pilot Records Database (PRD) and implement statutory requirements. The PRD would be used to facilitate the sharing of pilot records among air carriers and other operators in an electronic data system managed by the FAA. Air carriers, specific operators holding out to the public, entities conducting public aircraft operations, air tour operators, fractional ownerships, and corporate flight departments would be required to enter relevant data on individuals employed as pilots into the PRD, and this would be available electronically to those entities. In addition, this proposal identifies all air carriers, fractional ownerships, and some other operators or entities that would be required to access the PRD and evaluate the available data for each pilot candidate prior to making a hiring decision.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
