Federal Aviation Administration February 27, 2020 – Federal Register Recent Federal Regulation Documents
Results 1 - 12 of 12
Office of Commercial Space Transportation: Notice of Availability and Request for Comment on the Draft Environmental Assessment for SpaceX Falcon Launches at Kennedy Space Center and Cape Canaveral Air Force Station
In accordance with the National Environmental Policy Act of 1969, as amended (NEPA), Council on Environmental Quality NEPA implementing regulations, and FAA Order 1050.1F, Environmental Impacts: Policies and Procedures, the FAA is announcing the availability of and requesting comment on the Draft Environmental Assessment for SpaceX Falcon Launches at Kennedy Space Center and Cape Canaveral Air Force Station (Draft EA).
Petition for Exemption; Summary of Petition Received; The Boeing Company
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by reports of loss of retention of the regulator inlet filter retainer on certain crew oxygen cylinder assemblies. This AD requires an inspection of the crew oxygen cylinder assembly for any discrepancy and replacement of an affected crew oxygen cylinder assembly with a serviceable part, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA superseding Airworthiness Directive (AD) 2015-24-04, which applied to certain Bombardier, Inc., Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes, Model CL-600-2C10 (Regional Jet Series 700, 701, & 702) airplanes, Model CL-600-2D15 (Regional Jet Series 705) airplanes, Model CL-600-2D24 (Regional Jet Series 900) airplanes, and Model CL-600-2E25 (Regional Jet Series 1000) airplanes. AD 2015-24-04 required repetitive inspections of the cage assembly for damaged or detached window louver panel assemblies (WLPAs) and blowout panels (BOPs), and corrective actions if necessary. This AD requires one-time inspections of the WLPAs and BOPs, corrective actions if necessary, and a revision of the existing maintenance or inspection program, as applicable, to incorporate new airworthiness limitations, which would terminate the inspection requirement. This AD was prompted by a determination that new airworthiness limitations, as well as additional actions, are necessary to address the unsafe condition. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A321-211, -212, -213, -231, and -232 airplanes. This AD was prompted by a report of erroneous positioning of affected parts on the skin of the fuselage during the pre-drill phase, which could result in unwanted drill-starts. This AD requires inspections for the presence of unwanted drill-starts on affected parts, and an inspection for cracks and corrective action if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Dassault Aviation Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Dassault Aviation Model MYSTERE-FALCON 20-C5, 20-D5, 20-E5, and 20-F5 airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8 airplanes. This AD was prompted by a report of fatigue cracking at certain frame tie rod locations of the wing. This AD requires repetitive inspections for cracking of the left- and right-side frame tie rod assemblies and stub beam upper chords, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Dassault Aviation Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Dassault Aviation Model MYSTERE-FALCON 20-C5, 20-D5, 20-E5, and 20-F5 airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Defense and Space S.A. (Formerly Known as Construcciones Aeronauticas, S.A.) Airplanes
The FAA is superseding Airworthiness Directive (AD) 2017-19-08 and AD 2018-19-02, which applied to Airbus Defense and Space S.A. Model C-212-CB, C-212-CC, C-212-CD, C-212-CE, and C-212-DF airplanes. AD 2018-19-02 required repetitive inspections of the rudder pedal control system support box and shaft and applicable corrective actions; accomplishing those actions terminated the requirements of AD 2017-19- 08. This AD continues to require repetitive inspections and applicable corrective actions; and also requires a modification of the rudder pedal adjustment system; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD was prompted by a determination that a modification must be done in order to address the unsafe condition. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. This AD was prompted by a report that a fouling condition was found between the generator power cables and the support brackets of the auxiliary-aft fuel tank during production. This AD requires a visual inspection of the generator power cables for damage, installation of protective conduits and edging grommets, and applicable corrective actions. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Helicopters Deutschland GmbH Helicopters
The FAA is revising an earlier proposal for Airbus Helicopters Deutschland GmbH (Airbus Helicopters) Model MBB-BK 117 C-2 and Model MBB-BK 117 D-2 helicopters. This action revises the notice of proposed rulemaking (NPRM) by changing one of the required actions. The FAA is proposing this airworthiness directive (AD) to address the unsafe condition on these products. Since these actions impose an additional burden over that proposed in the NPRM, the FAA is reopening the comment period to allow the public the chance to comment on these proposed changes.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2012-21-08, which applies to certain The Boeing Company Model 737-600, -700, -700C, -800, and -900 series airplanes. AD 2012-21-08 requires inspecting for part numbers of the operational program software (OPS) of the flight control computers (FCCs) and installing and testing an updated version of the FCC OPS. Since the FAA issued AD 2012-21-08, the FAA has determined that there is a new unsafe condition which must be addressed by an updated version of the FCC OPS. This proposed AD would retain the requirement to inspect for part numbers of the OPS of the FCCs, and add a new requirement to update the version of the FCC OPS if necessary. This proposed AD would also expand the applicability to include The Boeing Company Model 737-900ER series airplanes. The FAA is proposing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
