Federal Aviation Administration January 6, 2020 – Federal Register Recent Federal Regulation Documents
Results 1 - 9 of 9
Airworthiness Directives; Viking Air Limited (Type Certificate Previously Held by Bombardier, Inc.; Canadair Limited) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Viking Air Limited Model CL-215-1A10 and CL-215-6B11 (CL-215T Variant) airplanes. This AD was prompted by reports of cracks on the wing lower skin under the drag angle at a certain wing station (WS). This AD requires a one-time inspection of the wing lower skin under the drag angle at a certain WS to determine if a certain repair or modification has been accomplished; repetitive visual inspections of certain fuselage structures; repetitive eddy current inspections of the front spar along a certain WS reference line, the drag angle, and all fastener holes; repetitive structural gap checks of a certain surface; and corrective actions if necessary. This AD also requires replacing certain rivets with certain fasteners, and corrective actions if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Fokker Services B.V. Airplanes
We are adopting a new airworthiness directive (AD) for all Fokker Services B.V. Model F28 Mark 0070 and 0100 airplanes. This AD was prompted by reports of fuselage bottom skin exfoliation corrosion, fuselage skin bulging and cracking, and missing fastener heads. This AD requires a detailed inspection of the fuselage bottom skin for corrosion; skin cracks or bulges; and missing, loose, or broken fasteners; and, depending on the findings, accomplishment of applicable repairs; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Fokker Services B.V. Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Fokker Services B.V. Model F28 Mark 0100 airplanes. This AD was prompted by reports of smoke in the flight deck, in conjunction with the loss of electrical power. This AD requires replacement of affected generator power transfer contactors (GPTCs), essential bus transfer contactors (EBTCs), and auxiliary power transfer contactors (APTCs), as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Embraer S.A. Airplanes
The FAA is superseding Airworthiness Directive (AD) 2017-06- 08, which applied to certain Embraer S.A. Model ERJ 170-100 LR, -100 STD, -100 SE, and -100 SU airplanes; and Model ERJ 170-200 LR, -200 SU, and -200 STD airplanes. AD 2017-06-08 required revising the existing maintenance or inspection program, as applicable, to incorporate more restrictive airworthiness limitations. This AD continues to require that revision; adds a new requirement for revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations; and adds airplanes to the applicability. Since the FAA issued AD 2017-06-08, the agency determined that new or more restrictive airworthiness limitations are necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 777-300ER and 777F series airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that the fuselage stringers, stringer splices, and skin splice straps are subject to widespread fatigue damage (WFD). This AD requires repetitive detailed inspections of certain stringer splices and skin splice straps for any cracks, repetitive high frequency eddy current (HFEC) inspections of certain stringers and stringer splices for any cracks, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 2016-18- 02, which applied to certain The Boeing Company Model 777-200 and - 300ER series airplanes. AD 2016-18-02 required replacing the low- pressure oxygen flex hoses with new non-conductive low-pressure oxygen flex hoses in the gaseous passenger oxygen system in airplanes equipped with therapeutic oxygen. This AD retains those actions and adds actions for certain airplanes. AD 2016-18-02 was prompted by the determination that the low-pressure oxygen flex hoses in the gaseous passenger oxygen system can potentially be conductive. This AD was further prompted by the determination that the associated service information is inadequate for certain airplanes. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes, Model CL-600-2C10 (Regional Jet Series 700, 701 & 702) airplanes, Model CL-600-2D15 (Regional Jet Series 705) airplanes, Model CL-600-2D24 (Regional Jet Series 900) airplanes, and Model CL-600-2E25 (Regional Jet Series 1000) airplanes. This AD was prompted by a report that during Automatic Flight Control System (AFCS) ALTS CAP or (V) ALTS CAP mode, the flight guidance/autopilot does not account for engine failure while capturing an altitude. This AD requires revising the existing airplane flight manual (AFM) to include a limitation and an abnormal operating procedure for the AFCS. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. This AD was prompted by a report of a wing stall (wing drop/ uncommanded roll) during landing flare, due to ice on the wing leading edges that was not detected by the anti-ice system. This AD requires revising the existing airplane flight manual (AFM) to include a limitation and normal operating procedure for the wing anti-ice system. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Helicopters
The FAA proposes to adopt a new airworthiness directive (AD) for Airbus Helicopters Model AS332C, AS332C1, AS332L, AS332L1, AS332L2, and EC225LP helicopters. This proposed AD would require, depending on helicopter configuration, installing skived polytetrafluoroethylene (PTFE) tape or removing skived PTFE tape and replacing the window seals. This proposed AD is prompted by a report of excessive friction between the window seal and the helicopter airframe. The actions of this proposed AD are intended to address an unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
