Federal Aviation Administration March 11, 2019 – Federal Register Recent Federal Regulation Documents
Results 1 - 9 of 9
Petition for Exemption; Summary of Petition Received; Alaska Air Carriers Association
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; Mohd Shaikhsorab
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; Debra Plymate
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Research, Engineering and Development Advisory Committee; Meeting
The FAA is issuing this notice to advise the public of a meeting of the REDAC.
Agency Information Collection Activities: Proposed Collection: Public Comment Request
The Federal Aviation Administration is seeking approval from the Office of Management and Budget (OMB) for approval of a new information collection related to airspace authorization requests. As required by the Paperwork Reduction Act of 1995 (PRA), the purpose of this notice is to allow 60 days for public comment. The FAA proposes collecting information pursuant to new requirements that limited recreational operations of unmanned aircraft must now apply for airspace authorizations in controlled airspace. The FAA will use the collected information to make determinations whether to authorize or deny the requested operation of UAS in controlled airspace. The proposed information collection is necessary to issue such authorizations or denials consistent with the FAA's mandate to ensure safe and efficient use of national airspace.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (Embraer) Airplanes
We are adopting a new airworthiness directive (AD) for certain Empresa Brasileira de Aeronautica S.A. (Embraer) Model EMB-135ER, - 135KE, -135KL, and -135LR airplanes and Model EMB-145, -145ER, -145MR, -145LR, -145XR, -145MP, and -145EP airplanes. This AD was prompted by reports of internal corrosion of the stow/transit switches installed in the engine thrust reversers. This AD requires installation of new stow/ transit switches. We are issuing this AD to address the unsafe condition on these products.
Agency Information Collection Activities: Requests for Comments; Clearance of a Renewed Approval of Information Collection: Airport Grants Program
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The collection involves data from airport sponsors and planning agencies to determine eligibility, and to ensure proper use of Federal funds and project accomplishments for the Airport Improvement Program.
Airworthiness Directives; Airbus SAS Airplanes
We are superseding Airworthiness Directive (AD) 2016-07-23, which applied to all Airbus SAS Model A318 and A319 series airplanes; Model A320-211, A320-212, A320-214, A320-216, A320-231, A320-232, and A320-233 airplanes; and Model A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, and A321-232 airplanes. AD 2016-07-23 required, for certain airplanes, repetitive replacements of the fixed fairing upper and lower attachment studs of both the left-hand (LH) and right-hand (RH) main landing gear (MLG); and repetitive inspections for corrosion, wear, fatigue cracking, and loose studs of each forward stud assembly of the fixed fairing door upper and lower forward attachments of both the LH and RH MLG; and replacement if necessary. AD 2016-07-23 also provided an optional terminating modification for the repetitive replacements of the fixed fairing upper and lower attachment studs. This AD retains the requirements of AD 2016-07-23 and, for certain airplanes, requires re-identification of the LH and RH MLG fixed fairing assemblies' part numbers. This AD was prompted by a determination that for some airplane configurations, associated fixed fairing assembly part numbers susceptible to fatigue cracking were not listed in certain service information required by AD 2016-07-23. In addition, we have determined that additional work is necessary to re- identify the fixed fairing assembly part number on certain airplanes. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by in-service findings that a cotter pin at the main fitting joint of the nose landing gear (NLG) retraction actuator to the NLG strut showed evidence of shearing after an NLG retraction-extension cycling. This AD requires revision of the existing maintenance or inspection program, as applicable, a general visual inspection for damage of a certain cotter pin present on certain configurations of the NLG strut assembly and for the modification number shown on the identification plate for the NLG strut, and modification of the NLG retraction actuator hardware on any damaged NLG strut assembly. We are issuing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
