Federal Aviation Administration November 15, 2017 – Federal Register Recent Federal Regulation Documents
Results 1 - 9 of 9
Airworthiness Criteria: Glider Design Criteria for DG Flugzeugbau GmbH Model DG-1000M Glider
These airworthiness design criteria are for the DG Flugzeugbau GmbH model DG-1000M glider. The Administrator finds the design criteria, which make up the certification basis for the DG-1000M glider, acceptable.
Petition for Exemption; Summary of Petition Received
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of the FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Airworthiness Directives; General Electric Company Turbofan Engines
We are adopting a new airworthiness directive (AD) for certain General Electric Company (GE) CF34-8C1, CF34-8C5, CF34-8C5A1, and CF34- 8C5B1 engines. This AD requires an inspection of the bleed air manifold link rod assemblies and the supply, return, and drain fuel fittings on the operability bleed valve (OBV). This AD was prompted by an engine fire that occurred as a result of malfunctions related to the OBV. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; the Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD was prompted by reports of crack indications in the right wing upper aft skin, originating from fastener holes common to the rear spar upper chord. This AD requires repetitive inspections for cracking of the wing upper aft skin, and applicable on-condition actions. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Airplanes
We are adopting a new airworthiness directive (AD) for certain Airbus Model A300 B4-600R series airplanes; Model A300 B4-603, B4-620, and B4-622 airplanes; Model A300 C4-605R Variant F airplanes; and Model A300 F4-605R airplanes. This AD was prompted by a determination that the top stringer joints at rib 18 are an area of uniform stress distribution, which indicates that cracks may develop in adjacent stringers at the same time. This AD requires an inspection of the upper wing skin and top stringer joints, and modification of the stringer joint couplings if necessary. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-200, -200C, -300, -400, and -500 series airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that the fuselage crown skin panels are subject to widespread fatigue damage (WFD). This AD requires repetitive inspections, replacement, and applicable on-condition actions for certain fuselage crown skin panels. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Rockwell Collins, Inc. Traffic Surveillance System Processing Unit
We are adopting a new airworthiness directive (AD) for certain Rockwell Collins, Inc. TSS-4100 Traffic Surveillance System Processing Units that incorporate TSSA-4100 Field Loadable Software (FLS) Rockwell Collins part numbers 810-0052-002/-003/-010/-011/-012/-100/-101 and are installed on airplanes. This AD was prompted by five instances of air traffic control observing coasting (extrapolated stale data) of automatic dependent surveillance-broadcast data (position/velocity data). This AD requires installing the TSSA-4100 FLS upgrades on the TSS-4100 units. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2B16 (CL-604 Variant) airplanes. This AD was prompted by reports of in-service incidents regarding the loss of all air data system information provided to the flightcrew. This AD requires revising the airplane flight manual (AFM) to provide ``Unreliable Airspeed'' procedures to the flightcrew to stabilize the airplane's airspeed and attitude for continued safe flight and landing. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; 328 Support Services GmbH (Type Certificate Previously Held by AvCraft Aerospace GmbH; Fairchild Dornier GmbH; Dornier Luftfahrt GmbH) Airplanes
We are adopting a new airworthiness directive (AD) for certain 328 Support Services GmbH Model 328-100 and Model 328-300 airplanes. This AD was prompted by reports of broken bonding wires of certain fuel line clamps. This AD requires repetitive inspections of certain fuel line clamps for discrepancies; repetitive inspections of certain parts for chafing marks; and replacement of any discrepant parts. This AD also includes an optional modification, which is a terminating action for the inspections. We are issuing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
