Federal Aviation Administration July 5, 2017 – Federal Register Recent Federal Regulation Documents
Results 1 - 10 of 10
Airworthiness Directives; Rolls-Royce plc Turbofan Engines
We are adopting a new airworthiness directive (AD) for certain Rolls-Royce plc (RR) Trent 1000-A2, Trent 1000-C2, Trent 1000-D2, Trent 1000-E2, Trent 1000-G2, Trent 1000-H2, Trent 1000-J2, Trent 1000-K2, and Trent 1000-L2 turbofan engines. This AD requires initial and repetitive on-wing inspections of affected intermediate pressure compressor (IPC) rotor seals. This AD was prompted by a failure of the IPC rotor seal. We are issuing this AD to correct the unsafe condition on these products.
Amendment of Class D and E Airspace; Tucson, AZ
This action amends the legal description of the Class E airspace designated as an extension, at Ryan Field, Tucson, AZ, eliminating the Notice to Airmen (NOTAM) part-time status. This action also updates the geographic coordinates of this airport in the associated Class D and E airspace areas to match the FAA's current aeronautical database. This action does not affect the charted boundaries or operating requirements of the airspace.
Proposed Amendment of Class E Airspace; Prineville, OR
This action proposes to modify Class E airspace extending upward from 700 feet above the surface at Prineville Airport, Prineville, OR, to accommodate airspace redesign for the safety and management of instrument flight rules (IFR) operations within the National Airspace System.
Proposed Amendment of Class E Airspace; Sunriver, OR
This action proposes to modify Class E airspace extending upward from 700 feet above the surface at Sunriver Airport, Sunriver, OR, to accommodate airspace redesign for the safety and management of instrument flight rules (IFR) operations within the National Airspace System.
Proposed Establishment of Class E Airspace, Big Timber, MT
This action proposes to establish Class E airspace extending upward from 700 feet above the surface at Big Timber Airport, Big Timber, MT, to accommodate the development of instrument flight rules (IFR) operations under standard instrument approach and departure procedures at the airport, for the safety and management of aircraft within the National Airspace System.
Proposed Amendment of Class E Airspace; Bend, OR
This action proposes to modify Class E airspace extending upward from 700 feet above the surface at Bend Municipal Airport, Bend, OR, to accommodate airspace redesign for the safety and management of instrument flight rules (IFR) operations within the National Airspace System.
Airworthiness Directives; Airbus Airplanes
We are adopting a new airworthiness directive (AD) for all Airbus Model A319, A320, and A321 series airplanes. This AD was prompted by a report that a main landing gear (MLG) door could not be closed due to rupture of the actuator fitting. This AD requires repetitive inspections for cracking of the MLG door actuator fitting and its components, and corrective actions if necessary. This AD also requires eventual replacement of all affected MLG door actuator fittings with new monoblock fittings, which would terminate the repetitive inspections. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD was prompted by reports of frame web cracking at certain locations. This AD requires repetitive inspections in certain locations of the frame web, and corrective action if necessary. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Airplanes
We are adopting a new airworthiness directive (AD) for all Airbus Model A318 and A319 series airplanes; Model A320-211, -212, - 214, -231, -232, and -233 airplanes; and Model A321-111, -112, -131, - 211, -212, -213, -231, and -232 airplanes. This AD was prompted by an evaluation by the design approval holder (DAH), which indicates that the main landing gear (MLG) does not comply with certification specifications, which could result in a locking failure of the MLG side stay. This AD requires modification or replacement of certain MLG side stay assemblies. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 777-300ER series airplanes. This AD was prompted by a report that certain galley tripod mount assemblies were not connected to the tie rods in the overhead support structure. This AD requires an inspection of certain galleys for the presence of the hardware that connects the tripod mount assembly to the tie rods in the overhead support structure, and corrective actions if necessary. We are issuing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.