Federal Aviation Administration August 4, 2016 – Federal Register Recent Federal Regulation Documents

Due to scheduling conflicts, the FAA is rescheduling meeting dates that were published in the notice May 6, 2016, announcing the 2016 meetings of the Equip 2020 Plenary and Working Groups.

This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

We are adopting a new airworthiness directive (AD) for all Fokker Services B.V. Model F.28 Mark 1000, 2000, 3000, and 4000 airplanes. This AD was prompted by a design review that revealed a hot spot may develop in the main fuel tank under certain failure conditions of the solenoid of the level control pilot valve, the reed switch of the main tank overflow valve, the level float switch of the collector tank, or the solenoid of the main tank fueling shut-off valve. This AD requires installing fuses in the wiring of the solenoid of the level control pilot valve, the reed switch of the main tank overflow valve, the level float switch of the collector tank, and the solenoid of the main tank fueling shut-off valve, as applicable. This AD also requires accomplishing concurrent actions and revising the airplane maintenance or inspection program, as applicable, by incorporating fuel airworthiness limitation items and critical design configuration control limitations (CDCCLs). We are issuing this AD to prevent an ignition source in the main fuel tank vapor space, which could result in a fuel tank explosion and consequent loss of the airplane.

We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by a design review, which found that the burst pressure of the flexible hose used to vent oxygen from the high-pressure relief valve of the oxygen cylinder overboard is lower than the opening pressure of the high-pressure relief valve. This AD requires replacement of flexible relief hoses for the crew oxygen bottles with new metal design relief hoses. We are issuing this AD to prevent the accumulation of excess oxygen in an enclosed space, which could, if near a source of ignition, cause an uncontrolled oxygen-fed fire.

We are adopting a new airworthiness directive (AD) for certain Airbus Model A330-200 Freighter, -200, and -300 series airplanes. This AD was prompted by a report of a manufacturing defect that affects the durability of affected parts in the cargo and cabin compartment. This AD requires an inspection of affected structural parts in the cargo and cabin compartments to determine if proper heat treatment has been done, and replacement if necessary. We are issuing this AD to prevent crack initiation and propagation, which could result in reduced structural integrity of the fuselage.