Federal Aviation Administration March 15, 2016 – Federal Register Recent Federal Regulation Documents
Results 1 - 6 of 6
Petition of the Aircraft Owner and Pilots Association (AOPA) To Amend FAA Policy Concerning Flying Club Operations at Federally Obligated Airports
The policy statement clarifies the FAA's policy interpretation regarding the operation of flying clubs at federally-obligated airports. Specifically, this policy statement amends FAA Order 5190.6B, Airport Compliance Requirements, Section 10.6 Flying Clubs to allow the clubs to compensate instructors and mechanics who are club members for services rendered to the Club. This policy statement also amends the FAA's definition of flying clubs.
Eighteenth Meeting: RTCA Special Committee (223) Internet Protocol Suite (IPS)
The FAA is issuing this notice to advise the public of the Eighteenth RTCA Special Committee 223 Meeting.
Airworthiness Directives; Honeywell International Inc. Turboprop and Turboshaft Engines
We propose to adopt a new airworthiness directive (AD) for certain Honeywell International Inc. (Honeywell) TPE331 model turboprop engines and TSE331-3U model turboshaft engines. This proposed AD was prompted by the discovery of cracks in a 2nd stage compressor impeller during a routine shop visit. This proposed AD would require removal of the 2nd stage compressor impeller. We are proposing this AD to prevent failure of the compressor impeller, uncontained part release, damage to the engine, and damage to the airplane.
Airworthiness Directives; Engine Alliance Turbofan Engines
We are adopting a new airworthiness directive (AD) for certain Engine Alliance (EA) GP7270 turbofan engines. This AD was prompted by reports of the installation of non-conforming honeycomb cartridges in the high-pressure compressor (HPC) adjacent to the HPC rotor stage 2 to 5 spool and stage 7 to 9 spool. This AD requires removal and replacement of the affected HPC rotor stage 2 to 5 and stage 7 to 9 spools and adjacent honeycomb cartridges. We are issuing this AD to prevent failure of the HPC rotor stage 2 to 5 and stage 7 to 9 spools, which could lead to uncontained engine failure and damage to the airplane.
Airworthiness Directives; Rolls-Royce plc Turbofan Engines
We are superseding airworthiness directive (AD) 2015-04-03 that applies to certain Rolls-Royce plc (RR) RB211 Trent 768-60, 772- 60, and 772B-60 turbofan engines. AD 2015-04-03 required inspection of the sealing sleeve on the high-pressure/intermediate-pressure (HP/IP) turbine support internal oil feed tube and removal of those sealing sleeves affected by AD 2015-04-03. This AD requires removal of either the affected sealing sleeve only or both the affected sealing sleeve and the oil feed tube. This AD was prompted by fractures of the HP/IP turbine support internal oil feed tube. We are issuing this AD to prevent failure of the HP/IP turbine support internal oil feed tube, uncontained engine failure, and damage to the airplane.
Airworthiness Directives; B-N Group Ltd. Airplanes
We are superseding an airworthiness directive (AD) 2007-06-06 for B-N Group Ltd. Models BN-2, BN-2A, BN-2A-2, BN-2A-3, BN-2A-6, BN- 2A-8, BN-2A-9, BN-2A-20, BN-2A-21, BN-2A-26, BN-2A-27, BN-2B-20, BN-2B- 21, BN-2B-26, BN-2B-27, BN2A MK. III, BN2A MK. III-2, BN2A MK. III-3 BN2A, BN2B, and BN2A MKIII (all models on TCDS A17EU and A29EU) airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as cracks in the inner shell of certain pitot/static pressure heads. We are issuing this AD to require actions to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
