Federal Aviation Administration October 23, 2015 – Federal Register Recent Federal Regulation Documents
Results 1 - 9 of 9
Establishment of Class E Airspace; Vancouver, WA
This action establishes Class E surface area airspace at Pearson Field, Vancouver, WA, to accommodate existing Standard Instrument Approach Procedures (SIAPS) at the airport. This enhances the safety and management of SIAPs for Instrument Flight Rules (IFR) operations at the airport.
Establishment of Class E Airspace; Vidalia, LA
This action establishes Class E airspace at Vidalia, LA. Controlled airspace is necessary to accommodate new Standard Instrument Approach Procedures at Concordia Parish Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) operations at the airport.
Revocation of Class E Airspace; Vincennes, IN
This action removes Class E airspace at O'Neal Airport, Vincennes, IN. Controlled airspace is no longer needed as the airport was abandoned in 2009 and is being removed from the FAAs database.
Airworthiness Directives; Engine Alliance Turbofan Engines
We propose to adopt a new airworthiness directive (AD) for certain Engine Alliance (EA) GP7270 turbofan engines. This proposed AD was prompted by reports of the installation of non-conforming honeycomb seals in the high-pressure compressor (HPC) adjacent to the HPC rotor stage 2 to 5 spool and stage 7 to 9 spool. This proposed AD would require removal and replacement of the affected HPC rotor stage 2 to 5 and stage 7 to 9 spools. We are proposing this AD to prevent failure of the HPC rotor stage 2 to 5 and stage 7 to 9 spools, which could lead to uncontained engine failure and damage to the airplane.
Airworthiness Directives; Airbus Airplanes
We propose to adopt a new airworthiness directive (AD) for certain Airbus Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes) modified by a particular supplemental type certificate (STC). This proposed AD was prompted by a report of chafing found on the overflow sensor harness of the surge tank, and subsequent contact between the electrical wiring and fuel tank structure. This proposed AD would require a one-time inspection for damage of the outer tank of the overflow sensor harness, and repair if necessary. This proposed AD would also require modification of the sensor harness. We are proposing this AD to prevent chafing of the harness and subsequent contact between the electrical wiring and fuel tank structure, which could result in electrical arcing and a fuel tank explosion.
Airworthiness Directives; Airbus Airplanes
We propose to supersede Airworthiness Directive (AD) 2012-18- 12, for certain Airbus Model A318, A319, and A320 series airplanes. AD 2012-18-12 currently requires modifying the off-wing escape slide (OWS) enclosures on the left-hand (LH) side and right-hand (RH) side of the fuselage. Since we issued AD 2012-18-12, we have received reports that additional OWS part numbers have been affected. This proposed AD would retain the requirements of AD 2012-18-12 and expand the applicability to all Airbus Model A318, A319, and A320 series airplanes. We are proposing this AD to prevent off-wing exits on the LH and RH sides of the fuselage from becoming inoperative, which, during an emergency, could impair the safe evacuation of occupants, possibly resulting in personal injuries.
Airworthiness Directives; Technify Motors GmbH Reciprocating Engines
We are adopting a new airworthiness directive (AD) for all Technify Motors GmbH TAE 125-02 reciprocating engines with a dual mass flywheel installed. This AD requires installation of a start phase monitoring system and associated specified software. This AD was prompted by reports of a gearbox drive shaft breaking during starting or restarting of the engine. We are issuing this AD to prevent overload and failure of the gearbox drive shaft, which could result in failure of the engine, in-flight shutdown, and loss of control of the airplane.
Airworthiness Directives; Pratt & Whitney Turbofan Engines
We are adopting a new airworthiness directive (AD) for certain Pratt & Whitney (PW) PW4164, PW4168, PW4168A, PW4164-1D, PW4168-1D, PW4168A-1D, and PW4170 turbofan engines. This AD was prompted by crack finds in the 6th stage low-pressure turbine (LPT) disk. This AD requires removal of the affected 6th stage LPT disks. We are issuing this AD to prevent failure of the 6th stage LPT disk, which could lead to an uncontained disk release, damage to the engine, and damage to the airplane.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.