Federal Aviation Administration June 16, 2015 – Federal Register Recent Federal Regulation Documents

Aviation Training Device Credit for Pilot Certification
Document Number: 2015-14836
Type: Proposed Rule
Date: 2015-06-16
Agency: Federal Aviation Administration, Department of Transportation
This rulemaking proposes to relieve burdens on pilots seeking to obtain aeronautical experience, training, and certification by increasing the allowed use of aviation training devices. These actions are necessary to bring the regulations in line with current needs and activities of the general aviation training community and pilots.
Transponder Requirement for Gliders
Document Number: 2015-14818
Type: Proposed Rule
Date: 2015-06-16
Agency: Federal Aviation Administration, Department of Transportation
The FAA requests public comment on removal of the current transponder exception for gliders. This action responds to recommendations from members of Congress and the National Transportation Safety Board. The purpose of this action is to gather information to determine whether the current glider exceptionfrom transponder equipment and use requirementsprovides the appropriate level of safety in the National Airspace System. The FAA will use the information gathered from this action to determine whether additional transponder equipment and use requirements are necessary for gliders operating in the excepted areas.
Special Conditions: Honda Aircraft Company, Model HA-420; Fire Extinguishing for Overwing Pylon Mounted Engines
Document Number: 2015-14816
Type: Rule
Date: 2015-06-16
Agency: Federal Aviation Administration, Department of Transportation
These special conditions are issued for the Honda Aircraft Company model HA-420 airplane. This airplane will have a novel or unusual design feature associated with mounting the engines on the wings in close proximity to the aft fuselage. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Amendment to the Titles of Restricted Areas R-5301, R-5302A, R-5302B, and R-5302C; North Carolina
Document Number: 2015-14798
Type: Rule
Date: 2015-06-16
Agency: Federal Aviation Administration, Department of Transportation
This action amends Title 14 Code of Federal Regulations (14 CFR) part 73 by making an editorial change to the location names listed in the titles of restricted areas R-5301, R-5302A, R-5302B, and R-5302C in North Carolina. There are no changes to the boundaries; designated altitudes; time of designation, activities conducted within the restricted areas or the actual physical locations of the restricted areas.
Airworthiness Directives; M7 Aerospace LLC Airplanes
Document Number: 2015-14698
Type: Proposed Rule
Date: 2015-06-16
Agency: Federal Aviation Administration, Department of Transportation
We propose to supersede Airworthiness Directive (AD) 97-02-02, which applies to certain Models SA26-AT, SA26-T, SA226-AT, SA226-T, SA226-T(B), SA226-TC, SA227-AC (C-26A), SA227-AT, SA227-BC (C-26A), SA227-CC, SA227-DC (C-26B), and SA227-TT airplanes. AD 97-02-02 currently requires applying torque to the control column pitch bearing attaching nuts, inspecting the bearing assembly, inspecting the elevator control rod end bearing retainer/dust seals, and replacing or installing new parts as necessary. Since we issued AD 97-02-02, an operator experienced a complete loss of elevator control because of failure of the bolt attaching the elevator control rod to the elevator walking beam under the cockpit floor. This proposed AD would prevent loss of pitch control, which if not corrected, could result in loss of airplane control. We are proposing this AD to correct the unsafe condition on these products.
Airworthiness Directives; Avidyne Corporation Integrated Flight Displays
Document Number: 2015-14645
Type: Rule
Date: 2015-06-16
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for Avidyne Corporation (Avidyne) Integrated Flight Displays (IFDs) part number (P/ N) 700-00083-() loaded with software release 9.3.1.0 or earlier release (referred to as Model R910 inch), P/N 700-00171-() loaded with software release 9.2.5.0 or earlier release (referred to as Model R9 12 inch), and P/N 700-00182-() loaded with software release 10.0.3.0 or earlier release (referred to as Model IFD540). This emergency AD was sent previously to all known U.S. owners and operators of all aircraft that incorporate the above referenced Avidyne IFDs. This AD requires incorporating an operational limitation into the Limitations section of the airplane flight manual (AFM) or airplane flight manual supplement (AFMS). This AD was prompted by reports of Avidyne IFDs displaying incorrect course deviation indication information during GPS approaches (incorrect display of lateral deviations). We are issuing this AD to correct the unsafe condition on these products.
Airworthiness Directives; Agusta S.p.A. (Agusta) Helicopters
Document Number: 2015-14415
Type: Rule
Date: 2015-06-16
Agency: Federal Aviation Administration, Department of Transportation
We are publishing a new airworthiness directive (AD) for Agusta Model A109A and A109A II helicopters, which was sent previously to all known U.S. owners and operators of these helicopters. This AD requires replacing a certain part-numbered blade with an approved part- numbered blade. This AD is prompted by an error in the Illustrated Parts Catalog (IPC) that incorrectly allows installation of a certain part-numbered blade on the affected helicopters. These actions are intended to prevent blade failure and subsequent loss of control of the helicopter.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2015-14397
Type: Rule
Date: 2015-06-16
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 747-8F and 747-8 series airplanes. This AD was prompted by reports of delamination damage to leading edge (LE) variable camber krueger (VCK) flaps. This AD requires repetitive inspections to detect delamination damage of the lightning strike applique (LSA) on certain LE VCK flaps, and corrective actions if necessary. We are issuing this AD to detect and correct delamination damage to certain LE VCK flaps, which can reduce the lightning strike protection capability on certain LE VCK flaps and result in an uncommanded motion of the trailing edge flap system; such uncommanded flap motion, without shutdown of the trailing edge or leading edge flaps, could cause unexpected changes in lift, potentially resulting in asymmetric lift and loss of control of the airplane.
Airworthiness Directives; Learjet Inc. Airplanes
Document Number: 2015-14396
Type: Rule
Date: 2015-06-16
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Learjet Inc. Model 45 airplanes. This AD was prompted by reports of non-conforming windshield supports (coupe rails). This AD requires a general visual inspection of the coupe rails to detect gouging and scratches, and to determine if a radius has been removed; an ultrasound inspection to measure the dimensions of the lower coupe rails; an eddy current inspection to detect cracks of the lower coupe rails; replacement of the lower coupe rails if necessary; and revision of the maintenance or inspection program, as applicable. We are issuing this AD to detect and correct non-conforming windshield supports, which could result in uncontrolled cabin depressurization and compromise of the capability of the windshield to withstand a bird strike.
Airworthiness Directives; Airbus Airplanes
Document Number: 2015-14395
Type: Rule
Date: 2015-06-16
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all Airbus Model A318, A319, A320, and A321 series airplanes. This AD was prompted by a report of corrosion found during the manufacturing process for some oxygen pipe assemblies that are used to supply oxygen to the flightcrew. This AD requires an inspection to determine the batch number or installation date of the oxygen pipe assembly that is installed at the end of the right-hand crew distribution line, and, if necessary, replacement of the pipe. We are issuing this AD to detect and correct corrosion, which could lead to blocked or reduced oxygen supply to a flightcrew member during a decompression event or a smoke/ fire event in the cockpit. Under certain conditions, corrosion particles could increase the risk of fire in the cockpit.
Establishment of Class E Airspace; Tucumcari, NM
Document Number: 2015-14322
Type: Rule
Date: 2015-06-16
Agency: Federal Aviation Administration, Department of Transportation
This action establishes Class E airspace at the Tucumcari VHF Omni-Directional Radio Range Tactical Air Navigation Aid (VORTAC), Tucumcari, NM, to facilitate vectoring of Instrument Flight Rules (IFR) aircraft under control of Albuquerque Air Route Traffic Control Center (ARTCC). This action enhances the safety and efficiency of aircraft operations within the National Airspace System (NAS).
Airworthiness Directives; B/E Aerospace Protective Breathing Equipment Part Number 119003-11
Document Number: 2015-14286
Type: Proposed Rule
Date: 2015-06-16
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain B/E Aerospace protective breathing equipment (PBE) that is installed on airplanes. This proposed AD was prompted by reports of a compromise in the vacuum seal of the pouch that contains the PBE. This proposed AD would require inspecting the PBE to determine if the pouch has the proper vacuum seal. We are proposing this AD to correct the unsafe condition on these products.
Airworthiness Directives; Airbus Airplanes
Document Number: 2015-14283
Type: Rule
Date: 2015-06-16
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2008-06-18 for all Airbus Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes); and Model A300 series airplanes. AD 2008- 06-18 required repetitive inspections for any cracking of the wing lower skin panel and associated internal support structure, and if necessary, corrective actions such as modifying the lower panel inboard of rib 9 aft of the rear spar and repairing cracks. This new AD continues to require actions required by AD 2008-06-18, and reduces certain compliance times. This AD was prompted by a report that information from an analysis and a fleet survey shows a need for reduced compliance times and intervals. We are issuing this AD to detect and correct cracking, which could lead to reduced structural integrity of the airplane.
Airworthiness Directives; Airbus Helicopters (Previously Eurocopter France) (Airbus Helicopters) Helicopters
Document Number: 2015-14282
Type: Proposed Rule
Date: 2015-06-16
Agency: Federal Aviation Administration, Department of Transportation
This document proposes superseding Airworthiness Directives (AD) 2000-05-17 and AD 2001-04-12, which apply to Eurocopter France (now Airbus Helicopters) Model EC120B helicopters. AD 2000-05-17 and AD 2001-04-12 require repetitive visual checks of the engine-to-main gearbox (MGB) coupling tube assembly (coupling tube) for a crack and replacing any cracked tube with an airworthy tube. This proposed AD would require removing certain engine mount parts from service, measuring the height of the engine mounting base for certain helicopters, replacing the engine mount if a certain height is exceeded, inspecting the flared coupling on certain helicopters for a crack, and replacing the coupling if it is cracked. Since we issued AD 2000-05-17 and AD 2001-04-12, there have been reports of additional cracks in coupling tubes. The proposed actions are intended to prevent coupling tube failure, loss of engine drive, and a subsequent forced landing of the helicopter.
Airworthiness Directives; Bell Helicopter Textron Canada Helicopters
Document Number: 2015-14278
Type: Proposed Rule
Date: 2015-06-16
Agency: Federal Aviation Administration, Department of Transportation
We are revising an earlier proposed airworthiness directive (AD) for Bell Helicopter Textron Canada (Bell) Model 222, 222B, 222U, 230, and 430 helicopters, which proposed to require replacing certain servo actuators before further flight. The NPRM was prompted by a collective servo actuator malfunction. This action revises the NPRM by adding new actions. Since these actions impose an additional burden over that proposed in the NPRM, we are reopening the comment period to allow the public the chance to comment on these proposed changes.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2015-14174
Type: Rule
Date: 2015-06-16
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2007-13-05 for all The Boeing Company Model 777-200, -200LR, -300, and -300ER series airplanes. AD 2007-13-05 required repetitive measurements of the freeplay of the right and left elevators, rudder, and rudder tab, and related investigative and corrective actions if necessary. This new AD requires repetitive freeplay inspections and lubrication of the right and left elevators, rudder, and rudder tab, and related investigative and corrective actions if necessary. This AD was prompted by the manufacturer's determination that the procedure for the rudder freeplay inspection does not properly detect excessive freeplay in the rudder control load loop. We are issuing this AD to detect and correct excessive wear in the load loop components of the control surfaces, which could lead to excessive freeplay of the control surfaces, flutter, and consequent loss of control of the airplane.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.