Federal Aviation Administration March 30, 2015 – Federal Register Recent Federal Regulation Documents
Results 1 - 6 of 6
Airworthiness Directives; Pacific Aerospace Limited Airplanes
We are adopting a new airworthiness directive (AD) for Pacific Aerospace Limited (PAL) Model 750XL airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as PAL Model 750XL airplanes manufactured with only one attitude indicator. A second attitude indicator is required for flights under instrument flight rules. We are issuing this AD to require actions to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
We propose to supersede Airworthiness Directive (AD) 2007-16- 08, which applies to all The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-300, 747-400, 747-400D, and 747SR series airplanes. AD 2007-16-08 currently requires repetitive inspections for cracking of the station 800 frame assembly, and repair if necessary. Since we issued AD 2007-16-08, we have received additional reports of cracks found at the forward and aft inner chord strap and angles on the station 800 frame on the left-side and right- side main entry doors. This proposed AD would expand the inspection area. We are proposing this AD to detect and correct fatigue cracks that could extend and fully sever the frame, which could result in development of skin cracks that could lead to rapid depressurization of the airplane.
Airworthiness Directives; Bombardier, Inc. Airplanes
We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc. Model BD-700-1A10 and BD-700-1A11 airplanes. This proposed AD was prompted by a report of several events where pilots experienced difficulty in lateral control of the airplane after doing a climb through heavy rain conditions and a determination that the cause was water ingress in the aileron control pulley assembly. This proposed AD would require, for certain airplanes, inspecting for correct clearance and rework if necessary, and, for certain other airplanes, installing a cover for the aileron pulley assembly. We are proposing this AD to prevent water ingress in the aileron control pulley assembly, which could freeze in cold conditions and result in reduced control of the airplane.
Airworthiness Directives; Airbus Helicopters Deutschland GmbH (Previously Eurocopter Deutschland GmbH) Helicopters
We propose to supersede airworthiness directive (AD) 2014-05- 06 for certain Eurocopter Deutschland GmbH (ECD) (now Airbus Helicopters Deutschland GmbH) Model EC135 and MBB-BK 117 C-2 helicopters to correct an error. AD 2014-05-06 currently requires inspecting the flight-control bearings repetitively, replacing any loose bearing with an airworthy flight-control bearing, and installing bushings and washers. This proposed AD would require the same actions. This proposed AD results from the discovery of an error in the compliance time for AD 2014-05-06. These proposed actions are intended to prevent the affected control lever from shifting, contacting the helicopter structure, and reducing control of the helicopter.
Airworthiness Directives; The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-100, 737-200, 737-200C, 737-300, 737-400, and 737-500 series airplanes. This AD was prompted by reports of cracking in the lower corners of the forward entry doorway and the upper corners of the airstairs cutout. This AD requires inspections for cracking of the forward entry doorway and airstairs cutout, and corrective actions if necessary. This AD also provides terminating action for the repetitive inspections. We are issuing this AD to detect and correct cracks in the lower corners of the forward entry door cutout and the upper corners of the airstairs cutout, which could progress and result in an inability to maintain cabin pressurization.
Airworthiness Directives; BAE Systems (Operations) Limited Airplanes
We are adopting a new airworthiness directive (AD) for all BAE Systems (Operations) Limited Model 4101 airplanes. This AD was prompted by a report of the failure, due to overheat, of a bracket on which the earth post (EP) for the generator and propeller de-ice systems is located. This AD requires an inspection of the affected EPs and attachment structure for damage, an inspection of the earth cables of the generator and propeller de-ice system for signs of overheating and arcing damage, a torque check of the affected EP stiff nuts, an electrical high current bonding check of the bracket, and corrective actions if necessary. We are issuing this AD to detect and correct an overheat failure of the EPs for the generator and propeller de-ice system, and possible degradation of the wing front spar cap and/or web, which could affect the structural integrity of the wing.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
