Federal Aviation Administration December 10, 2012 – Federal Register Recent Federal Regulation Documents
Results 1 - 9 of 9
Airworthiness Directives; Agusta S.p.A. (Type Certificate Currently Held by AgustaWestland S.p.A.) (Agusta) Helicopters
We are publishing a new airworthiness directive (AD) for Agusta Model AW139 helicopters, which was sent previously to all known U.S. owners and operators of these helicopters. This AD requires inspecting the pilot's and co-pilot's collective and cyclic control sticks for correctly installed attaching hardware. This AD is prompted by a report of an incorrectly installed pilot's collective stick, pilot's cyclic stick, and co-pilot's cyclic stick. These actions are intended to prevent detachment of the cyclic or collective control stick, and subsequent loss of control of the helicopter.
Airworthiness Directives; Airbus Airplanes
We are revising an earlier proposed airworthiness directive (AD) for all Airbus Model A318, A319, A320, and A321 series airplanes. That supplemental notice of proposed rulemaking (SNPRM) proposed an inspection to determine if certain angle of attack (AOA) probes are installed, and replacement of any affected AOA probe. That SNPRM was prompted by reports of oil residue between the stator and the rotor parts of the position resolvers of the AOA vane, which was a result of incorrect removal of the machining oil during the manufacturing process of the AOA resolvers. This action revises that SNPRM by clarifying the affected parts. We are proposing this AD to prevent erroneous AOA information and consequent delayed or non-activation of the AOA protection systems which, during flight at a high angle of attack, could result in reduced control of the airplane. Since these actions impose an additional burden over that proposed in the SNPRM, we are reopening the comment period to allow the public the chance to comment on these proposed changes.
Airworthiness Directives; Airbus Airplanes
We propose to adopt a new airworthiness directive (AD) for all Airbus Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300- 600 series airplanes); and Model A310 series airplanes. This proposed AD was prompted by a report of an uncommanded slide back of the co- pilot seat to the end stop position. This proposed AD would require a one-time inspection for a part number, a tensile test of the affected seats, and corrective actions if necessary. We are proposing this AD to detect and prevent unwanted movement of a pilot or co-pilot seat in the horizontal direction, which could lead to inadvertent input on the flight control commands and possibly result in loss of controllability of the airplane.
Clarification of Wildlife Hazard Management Requirements for Non-Certificated Federally Obligated Airports in the National Plan of Integrated Airport Systems (NPIAS)
To enhance safety, the FAA proposes to clarify Grant Assurance No. 19, ``Operation and Maintenance,'' which is required of an airport sponsor as a condition of receiving a development grant under the Airport Improvement Program (AIP). This clarification would require non-certificated, federally obligated airports that, after the effective date of this Federal Register Notice, accept a new airport development grant funded under the Airport Improvement Program (AIP), or accept a transfer of land under the Surplus Property Act for airport purposes (``Subject Airports''), to conduct Wildlife Hazard Site Visits (WHSVs) or Wildlife Hazard Assessments (WHAs). Non-certificated airports are airports that do not have a Part 139 certificate, and may include both commercial service airports as well as non-primary airports that serve mostly general aviation traffic. The Secretary of Transportation is required to provide notice and comment in the Federal Register and an opportunity for the public to comment upon proposals to modify the assurances or add new assurances.
Airworthiness Directives; Rolls-Royce plc Turbofan Engines
We are adopting a new airworthiness directive (AD) for certain Rolls-Royce plc (RR) RB211-Trent 900 series turbofan engines. This AD requires inspection of the low pressure turbine (LPT) bearing housing end cover assembly in certain engines and, if necessary, its replacement. This AD was prompted by a Trent 900 engine experiencing a high intermediate pressure vibration fault, along with other fluctuating engine parameters, while in flight. We are issuing this AD to prevent fracture of the oil transfer tube, which could result in uncontained failure of the engine and damage to the airplane.
Airworthiness Directives; The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. This AD was prompted by reports of flight crew failure to activate air data probe heat. This AD requires modifying the anti-icing system for the angle of attack sensor, the total air temperature, and the pitot probes. We are issuing this AD to prevent ice from forming on air data system sensors and consequent loss of or misleading airspeed indication on all airspeed indicating systems, which could lead to loss of control of the airplane.
Airworthiness Directives; Saab AB, Saab Aerosystems Airplanes
We are adopting a new airworthiness directive (AD) for certain Saab AB, Saab Aerosystems Model 340A (SAAB/SF340A) and SAAB 340B airplanes. This AD was prompted by reports of stall events during icing conditions where the natural stall warning (buffet) was not identified. This AD requires replacing the stall warning computer (SWC) with a new SWC, which provides an artificial stall warning in icing conditions, and modifying the airplane for the replacement of the SWC. We are issuing this AD to prevent natural stall events when operating in icing conditions, which, if not corrected, could result in loss of control of the airplane.
Airworthiness Directives; Erickson Air-Crane Incorporated Helicopters
We are adopting a new airworthiness directive (AD) for Erickson Air-Crane Incorporated (Erickson) Model S-64F helicopters. This AD requires inspecting for cracking or working rivets in each left and right splice fitting (transition fitting), the pylon bulkhead assembly-canted (bulkhead assembly), and the pylon steel strap (strap). This AD was prompted by several reports of cracking in the transition fittings, the bulkhead assembly, and the pylon. The actions specified by this AD are intended to detect cracking in the rotary rudder boom or pylon due to fatigue, and to prevent failure from static overload and subsequent loss of control of the helicopter.
Airworthiness Directives; Embraer S.A. Airplanes
We are superseding an existing airworthiness directive (AD) for all Embraer S.A. Model ERJ 190-100 STD, -100 LR, -100 IGW, -200 STD, -200 LR, and -200 IGW airplanes. That AD currently requires revising the maintenance program to incorporate modifications in the Airworthiness Limitation Section (ALS) of the EMBRAER ERJ 190 Maintenance Review Board Report (MRBR). This new AD requires revising the maintenance program to incorporate modifications in the ALS of the EMBRAER ERJ 190 MRBR to include new inspection tasks and their respective thresholds and intervals. This AD was prompted by issuance of new inspection tasks and their respective thresholds and intervals. We are issuing this AD since failure to inspect these structural components according to the new ALS tasks, thresholds, and intervals could prevent a timely detection of fatigue cracking, which if not properly addressed, could result in reduced structural integrity of the airplane.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
