Federal Aviation Administration October 1, 2012 – Federal Register Recent Federal Regulation Documents
Results 1 - 8 of 8
Aviation Rulemaking Advisory Committee Meeting on Transport Airplane and Engine Issues
This notice announces a public meeting of the FAA's Aviation Rulemaking Advisory Committee (ARAC) to discuss transport airplane and engine (TAE) issues. It also withdraws the notice entitled, ``Aviation Rulemaking Advisory Committee Meeting on Transport Airplane and Engine Issues'', published on September 26, 2012.
Airworthiness Directives; Cessna Aircraft Company Airplanes; Initial Regulatory Flexibility Analysis
This document announces the availability of and request for comments on the Initial Regulatory Flexibility Analysis for the previously published proposed airworthiness directive (AD) on Cessna Aircraft Company 310, 320, 340, 401, 402, 411, 414, and 421 airplanes regarding the installation of placards requiring flight limitations in icing conditions.
Schedule of Charges Outside the United States
The Federal Aviation Administration (FAA) is announcing the availability of Advisory Circular (AC) 187-1F which transmits an updated schedule of charges for services of FAA Flight Standards Aviation Safety Inspectors outside the United States. The advisory circular has been updated in accordance with the procedures listed in 14 CFR Part 187, Appendix A.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Airworthiness Directives; Airbus Airplanes
We are adopting a new airworthiness directive (AD) for certain Airbus Model A340-500 and -600 series airplanes. This AD requires repetitive inspections for corrosion of the drag stay lower arm assembly of the nose landing gear (NLG), and replacement if necessary. This AD also requires eventual replacement of the drag stay lower arm assembly of the NLG with an improved assembly having corrosion protection, which terminates the repetitive inspections required by this AD. This AD was prompted by findings of corrosion traces in the lugs and on the bearing outer surface of the NLG during routine maintenance checks. We are issuing this AD to prevent failure of the drag stay lower arm, which could result in NLG collapse and consequent reduced controllability of the airplane during takeoff.
Airworthiness Directives; Fokker Services B.V. Airplanes
We are superseding two existing airworthiness directives (ADs) for certain Fokker Services B.V. Model F.28 Mark 0100 airplanes. The first existing AD currently requires removing the actuator from the fuel-balance transfer-valve (FBTV) and installing a locking device on the FBTV. The second existing AD currently requires inspecting to verify that the position indicator of the FBTV is in the closed position and deactivating the fuel-balance transfer-system. This new AD requires installing an FBTV locking device. This AD was prompted by reports that the FBTV was inadvertently reactivated after required de- activation measures were undone. We are issuing this AD to prevent fuel starvation and a consequent double-engine flameout, possibly resulting in a forced landing, damage to the airplane, and injury to occupants.
Airworthiness Directives; The Boeing Company Airplanes
We are superseding an existing airworthiness directive (AD) for certain The Boeing Company Model DC-10-10, DC-10-10F, DC-10-15, DC- 10-30, DC-10-30F (KC-10A and KDC-10), DC-10-40, DC-10-40F, MD-10-10F, and MD-10-30F airplanes. That AD currently requires installing or replacing with improved parts, as applicable, the bonding straps between the metallic frame of the fillet and the wing leading edge ribs, on both the left and right sides of the airplane; and for certain airplanes, repositioning or replacing two bonding straps, doing a bonding-resistance check and an inspection to determine correct installation of certain bonding straps, and applicable corrective actions. This new AD adds airplanes to the applicability and, depending on the airplane configuration, requires installing new braided bonding straps, inspecting to determine if a certain strap is installed and replacing with or installing a braided bonding strap if necessary, measuring the electrical resistance of the bonding straps, verifying that brackets have an acceptable fillet seal, and doing corrective actions if necessary. This AD was prompted by fuel system reviews conducted by the manufacturer, and our determination that additional actions are necessary to address the identified unsafe condition. We are issuing this AD to reduce the potential of ignition sources inside fuel tanks in the event of a severe lightning strike, which, in combination with flammable fuel vapors, could result in fuel tank explosions and consequent loss of the airplane.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
