Federal Aviation Administration August 1, 2012 – Federal Register Recent Federal Regulation Documents

We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC- 9-83 (MD-83), DC-9-87 (MD-87), and MD-88 airplanes. This proposed AD was prompted by reports of fatigue cracks found in Stringer 11 at the outboard flap, inboard drive hinge at Station Xrs=164.000. This proposed AD would require repetitive inspections for cracks in Stringer 11, and a splice repair if necessary; and repetitive post-repair inspections, and repair if necessary. We are proposing this AD to detect and correct such cracking, which could result in the wing structure not supporting the limit load condition, which could lead to loss of structural integrity of the wing.

We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 737-200 and -200C series airplanes. This proposed AD was prompted by a report of elevator vibration and bearing swage failures. This proposed AD would require, for certain airplanes, repetitive inspections for any discrepancies (such as a gap or a loose spacer) of the aft attach lugs for the elevator tab control mechanism, and replacement if necessary, and for other airplanes, contacting the FAA for inspection or repair instructions and doing the work specified in those instructions. We are proposing this AD to detect and correct discrepancies in the aft attach lugs for the elevator tab control mechanism, which could result in elevator and tab vibration. Consequent structural failure of the elevator or horizontal stabilizer could result in loss of structural integrity and loss of airplane control.