Federal Aviation Administration May 2, 2011 – Federal Register Recent Federal Regulation Documents
Results 1 - 11 of 11
Airworthiness Directives; Airbus Model A340-200 and -300 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; The Boeing Company Model 747-200B, -300, -400, -400D, and -400F Series Airplanes Powered by Pratt and Whitney 4000 or General Electric CF6-80C2 Series Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD requires an inspection to determine the part number of the mid-pivot access door and to determine if the correct door is installed, and the installation of a marker on the mid- pivot access door, and if necessary, repetitive ultrasonic inspections for cracking of the mid-pivot bolt assembly and eventual replacement of the mid-pivot bolt assembly. This AD was prompted by a report that the left and right access doors of the spring beam mid-pivot bolt assembly for the No. 1 strut were inadvertently installed in the incorrect position during strut modification. We are issuing this AD to detect and correct incorrectly installed mid-pivot bolt assemblies on the spring beam on the outboard struts. Incorrectly installed bolt assemblies could lead to fatigue cracking and consequent fracturing of the mid-pivot bolt assembly, which could lead to loss of the spring beam load path and the possible separation of a strut and engine from the airplane during flight.
Airworthiness Directives; The Boeing Company Model 777-200, -200LR, -300, and -300ER Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD requires, for certain airplanes, replacing certain boost pump relays with ground fault interrupter (GFI) relays. For certain other airplanes, this AD requires installing new panels in the main equipment center, making certain wiring changes, installing new GFI relays in the new panels, and installing new electrical load management system (ELMS) software. For certain other airplanes, this AD requires doing certain bond resistance measurements, and corrective actions if necessary. This AD was prompted by fuel system reviews conducted by the manufacturer. We are issuing this AD to prevent potential ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in a fuel tank explosion and consequent loss of the airplane.
Airworthiness Directives; Airbus Model A300 B4-601, B4-603, B4-605R, C4-605R Variant F, and F4-605R Airplanes, and A310-204 and -304 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; The Boeing Company Model 777-200 and -300 Series Airplanes Equipped With Pratt and Whitney Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD requires repetitive inspections for hydraulic fluid contamination of the interior of the strut disconnect assembly; repetitive inspections for discrepancies of the interior of the strut disconnect assembly, if necessary; repetitive inspections of the exterior of the strut disconnect assembly for cracks, if necessary; and corrective action if necessary. This AD also provides an optional terminating action for the inspections. This AD was prompted by reports of system disconnect boxes that have been contaminated with hydraulic fluid and, in one incident, led to subsequent cracking of titanium parts in the system disconnect assembly. We are issuing this AD to detect and correct hydraulic fluid contamination, which can cause cracking of titanium parts in the system disconnect assembly, resulting in compromise of the engine firewall. A cracked firewall can allow fire in the engine area to enter the strut and can lead to an uncontained engine strut fire if flammable fluid is present. Cracking of the disconnect box may also reduce the effectiveness of the fire extinguishing system in the engine compartment and could contribute to an uncontained engine fire. In addition, a cracked disconnect box can leak flammable fluids into the engine core, which can initiate an engine fire, and lead to one or both fire conditions discussed above.
Airworthiness Directives; Bombardier, Inc. Model DHC-8-101, -102, -103, -106, -201, -202, -301, -311, -315, -401, and -402 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Petition for Exemption; Summary of Petition Received
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Airworthiness Directives; General Electric Company CT7-8, CT7-8A, CT7-8A1, CT7-8E, and CT7-8F5 Turboshaft Engines
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD would require the installation of an accessory gearbox (AGB) axis-A oil slinger nut to the axis-A shaft assembly. This proposed AD was prompted by four reports of unrecoverable engine stalls, during hover in a left-roll attitude. We are proposing this AD to prevent an unrecoverable engine stall, leading to a helicopter forced landing or accident.
Proposed Amendment of Class E Airspace; Ava, MO
This action proposes to amend Class E airspace at Ava, MO. Decommissioning of the Bilmart non-directional beacon (NDB) at Bill Martin Memorial Airport, Ava, MO, has made this action necessary for the safety and management of Instrument Flight Rules (IFR) operations at Bill Martin Memorial Airport.
Airworthiness Directives; Dassault-Aviation Model FALCON 7X Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Airbus Model A340-200, -300, -500, and -600 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above that supersedes an existing AD. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: * * * * * The revision 01 of Airbus A340 ALS [Airworthiness Limitations section] Part 3 introduces more restrictive maintenance requirements and/or airworthiness limitations. Failure to comply with this revision constitutes an unsafe condition. * * * * * The unsafe condition is a safety-significant latent failure that would, in combination with one or more other specific failures or events, result in a hazardous or catastrophic failure condition. This AD requires actions that are intended to address the unsafe condition described in the MCAI.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
