Federal Aviation Administration September 9, 2009 – Federal Register Recent Federal Regulation Documents
Results 1 - 13 of 13
Airworthiness Directives; General Electric Company (GE) CJ610 Series Turbojet Engines and CF700 Series Turbofan Engines
The FAA proposes to adopt a new airworthiness directive (AD) for GE CJ610 series turbojet engines and CF700 turbofan engines with AFT Technologies combustion liners, part number (P/N) AFT-5016T30G02. This proposed AD would require removing from service, AFT Technologies combustion liners, P/N AFT-5016T30G02. This proposed AD results from a report of an AFT Technologies combustion liner that released a large section of the inner combustion liner and reports of six combustion liners with premature cracks. We are proposing this AD to prevent premature cracks in the combustion liner, which could release pieces of the inner combustion liner. A release of pieces of the inner combustion liner could cause an uncontained failure of the engine turbine and damage to the airplane.
Airworthiness Directives; Boeing Model 737-600, -700, -700C, -800, -900 and -900ER Series Airplanes
We are adopting a new airworthiness directive (AD) for all Boeing Model 737-600, -700, -700C, -800, -900 and -900ER series airplanes. This AD requires repetitive testing of the rudder pedal forces or repetitive detailed inspections of the inner spring of the rudder feel and centering unit, and corrective actions if necessary. This AD also requires replacement of the spring assembly in the rudder feel and centering unit, which terminates the repetitive tests or inspections. This AD results from reports of low rudder pedal forces that were caused by a broken inner spring in the rudder feel and centering unit; a broken inner spring in conjunction with a broken outer spring would significantly reduce rudder pedal forces. We are issuing this AD to prevent reduced rudder pedal forces, which could result in increased potential for pilot-induced oscillations and reduce the ability of the flightcrew to maintain the safe flight and landing of the airplane.
Airworthiness Directives; Airbus Model A300 B2-1C, B2-203, B2K-3C, B4-103, B4-203, and B4-2C Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Airbus Model A330-200 and -300 Series Airplanes and Model A340-200 and -300 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Airbus Model A330-300, A340-200, and A340-300 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; ATR Model ATR42 and ATR72 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Airbus Model A310-203, -204, -221, -222, -304, -322, -324, and -325 Airplanes
We are superseding an existing airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; 328 Support Services GmbH Dornier Model 328-100 and -300 Airplanes
We are superseding an existing airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Fokker Model F.28 Mark 0070 and 0100 Airplanes
We are superseding an existing airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Boeing Model 707 Airplanes, and Model 720 and 720B Series Airplanes
The FAA is superseding an existing airworthiness directive (AD), which applies to certain Boeing Model 707 airplanes, and Model 720 and 720B series airplanes. The existing AD currently requires repetitive detailed inspections to detect cracks and corrosion on any existing repairs and at certain body stations (STA) of the visible surfaces of the wing to body terminal fittings including the web, flanges, and ribs; and applicable related investigative and corrective actions. This new AD retains the requirements of the existing AD and requires repetitive ultrasonic inspections to detect any stress corrosion cracks within the outboard flange of the left and right body terminal fittings at STA 820, and related investigative and corrective actions if necessary. This AD also provides an optional terminating action for the repetitive inspections. This AD also adds two airplanes to the applicability. This AD results from reports of cracks found in the wing to body terminal fittings during routine inspections. We are issuing this AD to detect and correct cracks and corrosion in the body terminal fittings above and below the floor, which could cause loss of support for the wing and could adversely affect the structural integrity of the airplane.
Airworthiness Directives; Bombardier Model DHC-8-400 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Fokker Model F.28 Mark 0070 and 0100 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Rolls-Royce plc. (RR) RB211 Trent 900 Series Turbofan Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.