Federal Aviation Administration January 19, 2007 – Federal Register Recent Federal Regulation Documents
Results 1 - 4 of 4
Airworthiness Directives; Airbus Model A300 B4-600, B4-600R, and F4-600R Series Airplanes, and Model C4-605R Variant F Airplanes (Collectively Called A300-600 Series Airplanes)
The FAA proposes to supersede an existing airworthiness directive (AD) that applies to all Airbus Model A300-600 series airplanes. The existing AD currently requires inspections of the lower door surrounding structure to detect cracks and corrosion; inspections to detect cracking of the holes of the corner doublers, the fail-safe ring, and the door frames of the door structures; and repair if necessary. The existing AD also provides for optional terminating action for certain inspections. This proposed AD would retain all requirements of the existing AD, mandate the previously optional terminating action, reduce the applicability of the existing AD, and add repetitive inspections behind scuff plates for certain affected airplanes. This proposed AD results from a determination that further rulemaking is necessary to improve the fatigue behavior of the cabin door surroundings. We are proposing this AD to prevent corrosion between the scuff plates at exit and cargo doors and fatigue cracks originating from certain fastener holes located in adjacent structure, which could result in reduced structural integrity of the door surroundings.
Airworthiness Directives; Boeing Model 737-200, -300, -400, -500, -600, -700, -800, and -900 Series Airplanes; Boeing Model 757-200 and -300 Series Airplanes; and McDonnell Douglas Model DC-10-10, DC-10-10F, DC-10-30, DC-10-30F, DC-10-40, MD-10-30F, MD-11, and MD-11F Airplanes; Equipped With Reinforced Flight Deck Doors Installed in Accordance With Supplemental Type Certificate (STC) ST01335LA, STC ST01334LA, and STC ST01391LA, Respectively
The FAA proposes to supersede an existing airworthiness directive (AD) that applies to certain transport category airplanes identified above. The existing AD currently requires modification of the reinforced flight deck door and other actions related to the reinforced flight deck door. Those other actions include modifying the door, inspecting and modifying wiring in the area, and revising the maintenance program to require more frequent testing of the decompression panels of the flight deck door. This proposed AD would add airplanes to the existing requirement of a one-time inspection for chafing of wire bundles in the area of the flight deck door and corrective actions if necessary. This proposed AD would remove certain airplanes from the applicability. This proposed AD results from a report of smoke and fumes in the cockpit of a Model 737-300 series airplane. We are proposing this AD to prevent inadvertent release of the decompression latch and consequent opening of the decompression panel in the flight deck door, or penetration of the flight deck door by smoke or shrapnel, any of which could result in injury to the airplane flightcrew. We are also proposing this AD to detect and correct wire chafing, which could result in arcing, fire, and/or reduced controllability of the airplane.
Airworthiness Directives; Airbus Model A310 Series Airplanes
The FAA proposes to supersede an existing airworthiness directive (AD) that applies to all Airbus Model A310 series airplanes. The existing AD currently requires inspections of the lower door surrounding structure to detect cracks and corrosion; inspections to detect cracking of the holes of the corner doublers, the fail-safe ring, and the door frames of the door structures; and repair if necessary. The existing AD also provides for optional terminating action for certain inspections. This proposed AD would retain all requirements of the existing AD, mandate the previously optional terminating action, and reduce the applicability of the existing AD. This proposed AD results from a determination that further rulemaking is necessary to improve the fatigue behavior of the cabin door surroundings. We are proposing this AD to prevent corrosion between the scuff plates at exit and cargo doors and fatigue cracks originating from certain fastener holes located in adjacent structure, which could result in reduced structural integrity of the door surroundings.
Membership Availability in the National Parks Overflights Advisory Group Aviation Rulemaking Committee To Represent Commercial Air Tour Interests
The National Park Service (NPS) and the Federal Aviation Administration (FAA), as required by the National Parks Air Tour Management Act of 2000, established the National Parks Overflights Advisory Group (NPOAG) in March 2001. The NPOAG was formed to provide continuing advice and counsel with respect to commercial air tour operations over and near national parks. This notice informs the public of one vacancy (due to completion of membership on May 19, 2007), on the NPOAG (now the NPOAG Aviation Rulemaking Committee (ARC)) for a member representing commercial air tour operators, and invites interested persons to apply to fill the vacancy.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
