Department of Transportation September 23, 2024 – Federal Register Recent Federal Regulation Documents
Results 1 - 5 of 5
Parts and Accessories Necessary for Safe Operation; Application for an Exemption From Encore Flooring & Building Products, USDOT #2329419
The Federal Motor Carrier Safety Administration (FMCSA) announces its decision to grant an application from Encore Flooring & Building Products (Encore, USDOT #2329419) for an exemption to allow it to operate commercial motor vehicles (CMVs) equipped with a module manufactured by Intellistop, Inc. (Intellistop). The Intellistop module is designed to pulse the required rear clearance, identification, and brake lamps from a lower-level lighting intensity to a higher-level lighting intensity 4 times in 2 seconds when the brakes are applied and then return the lights to a steady-burning state while the brakes remain engaged. The Agency has determined that granting the exemption to Encore would likely achieve a level of safety equivalent to, or greater than, the level of safety achieved by the regulation.
Winnebago Industries, Inc., Denial of Petition for Decision of Inconsequential Noncompliance
Winnebago Industries, Inc., (Winnebago or petitioner), has determined that certain model year (MY) 2013-2023 Winnebago motorhomes do not fully comply with Federal Motor Vehicle Safety Standard (FMVSS) No. 108, Lamps, Reflective Devices, and Associated Equipment. Winnebago filed a noncompliance report dated November 11, 2022, and amended the report on December 2, 2022, and May 17, 2023. Winnebago petitioned NHTSA on December 2, 2022, and amended the petition on May 17, 2023, for a decision that the subject noncompliance is inconsequential as it relates to motor vehicle safety. This document announces the denial of Winnebago's petition.
Quarterly Reports of Positive Train Control System Performance
The purpose of this notice is to inform the public that FRA has determined it is in the public interest for railroads to continue submitting reports of their positive train control (PTC) systems' performance to FRA on a quarterly basis as the Infrastructure Investment and Jobs Act currently requires, and as the Office of Management and Budget (OMB) has approved through March 31, 2027.
Airworthiness Directives; Piper Aircraft, Inc. Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2020-26-16, which applies to certain Piper Aircraft, Inc. (Piper) Model PA-28-151, PA-28-161, PA-28-181, PA-28-235, PA-28R-180, PA-28R-200, PA- 28R-201, PA-28R-201T, PA-28RT-201, PA-28RT-201T, PA-32-260, PA-32-300, PA-32R-300, PA-32RT-300, and PA-32RT-300T airplanes. AD 2020-26-16 requires calculating the factored service hours (FSH) for each main wing spar to determine when an inspection is required, inspecting the lower main wing spar bolt holes for crack(s), and replacing any cracked main wing spar. Since the FAA issued AD 2020-26-16, the FAA evaluated the reports required by AD 2020-26-16 and determined that repetitive inspections of the lower main wing spar bolt holes for crack(s) and non-crack damage (including deep scratches, gouges, and thread marks) and replacement or modification of the main wing spar should be required, calculated service hours (CSH) should be used instead of FSH to determine times for required actions for each main wing spar, and that certain airplanes should be removed from the applicability and a new airplane model added to the applicability. This proposed AD would require calculating the CSH for each main wing spar; repetitively inspecting the lower main wing spar bolt holes for crack(s) and non- crack damage and taking corrective actions as needed; and replacing or modifying main wing spars at a specified time. This proposed AD would also revise the applicability by removing certain airplanes and adding a new airplane model. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 2019-25- 17, which applied to all The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. AD 2019-25-17 required revising the existing airplane flight manual (AFM) to prohibit selection of certain runways for airplanes equipped with certain software. Since the FAA issued AD 2019-25-17, Boeing has developed new software to address the unsafe condition. This AD was prompted by reports of display electronic unit (DEU) software errors on airplanes with a selected instrument approach to a specific runway. This AD retains the requirements of AD 2019-25-17. This AD also requires installing the new software and performing a software configuration check, which terminates the AFM revision. The FAA is issuing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
