Department of Transportation March 13, 2024 – Federal Register Recent Federal Regulation Documents

PHMSA is publishing this notice to inform interested parties on how PHMSA evaluates and determines whether a special permit can be considered consistent with the public interest. This notice outlines the criteria PHMSA used to evaluate special permit applications on the basis of public interest.

The FAA is superseding Airworthiness Directive (AD) 2022-13-16 for all GE Aviation Czech s.r.o. (GEAC) (type certificate previously held by WALTER Engines a.s., Walter a.s., and MOTORLET a.s.) Model M601D-11 engines; and AD 2022-14-12, for certain GEAC Model M601D-11, M601E-11, M601E-11A, M601E-11AS, M601E-11S, and M601F engines. AD 2022- 13-16 required revising the airworthiness limitations section (ALS) of the existing engine maintenance manual (EMM) to incorporate a visual inspection of the centrifugal compressor case for cracks. AD 2022-14-12 required replacing the propeller shaft for Model M601F engines. AD 2022-14-12 also required calculating the accumulated life of the propeller shaft and replacing the propeller shaft, if necessary, for model M601D-11, M601E-11, M601E-11A, M601E-11AS, and M601E-11S engines. Since the FAA issued AD 2022-13-16 and AD 2022-14-12, the manufacturer revised the ALS of the existing EMM to introduce new and more restrictive tasks and limitations, expand the applicability to all Model M601 engines, and incorporate certain requirements addressed by AD 2021-13-07 and AD 2023-01-10, which prompted this AD. This AD requires revising the ALS of the existing EMM and the operator's existing approved engine maintenance or inspection program, as applicable, to incorporate new and more restrictive tasks and limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

These special conditions are issued for the Gulfstream Aerospace Corporation (Gulfstream) Model GVIII-G700 and GVIII-G800 series airplanes. These airplanes will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. This design feature is side-facing seats oriented in the aircraft with the occupant facing 90 degrees to the direction of aircraft travel. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.