Department of Transportation February 2024 – Federal Register Recent Federal Regulation Documents
Results 151 - 186 of 186
Qualification of Drivers; Exemption Applications; Epilepsy and Seizure Disorders
FMCSA announces its decision to renew exemptions for 11 individuals from the requirement in the Federal Motor Carrier Safety Regulations (FMCSRs) that interstate commercial motor vehicle (CMV) drivers have ``no established medical history or clinical diagnosis of epilepsy or any other condition which is likely to cause loss of consciousness or any loss of ability to control a CMV.'' The exemptions enable these individuals who have had one or more seizures and are taking anti-seizure medication to continue to operate CMVs in interstate commerce.
Petition for Waiver of Compliance and Notice of Public Hearing
On January 16, 2024, FRA published a public notice announcing that on August 10, 2023, Georgia Central Railway, L.P. and Heart of Georgia Railroad, Inc. (Petitioners) submitted a request to FRA for approval of a test program, and the temporary suspension of certain FRA safety regulations in connection with that program (Program). In this notice, FRA is announcing a public hearing to allow interested persons the opportunity to provide comments on the petition. FRA is also announcing a 14-day extension of the comment period to allow time for interested parties to submit comments on the petition or in response to views or information provided at the public hearing.
Airworthiness Directives; Hélicoptères Guimbal Helicopters
The FAA is superseding Airworthiness Directive (AD) 2023-24-51 which applied to all H[eacute]licopt[egrave]res Guimbal Model Cabri G2 helicopters. AD 2023-24-51 was prompted by reports of a crack in the pilot cyclic stick base and required repetitively inspecting certain part-numbered pilot and co-pilot cyclic stick bases and, depending on the results, corrective action. AD 2023-24-51 also prohibited installing those pilot and co-pilot cyclic stick bases unless certain requirements were met. Since the FAA issued AD 2023-24-51, more cracks in the cyclic stick bases have been reported, including a crack in a cyclic stick base that had accumulated only 700 hours time-in-service (TIS). This AD requires the same actions as AD 2023-24-51 but reduces the compliance time for performing the initial inspection. These actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA previously sent this AD as an emergency AD to all known U.S. owners and operators of these helicopters. The FAA is issuing this AD to address the unsafe condition on these products.
Coastwise Endorsement Eligibility Determination for a Foreign-Built Vessel: Wind Dancer (Motor); Invitation for Public Comments
The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to issue coastwise endorsement eligibility determinations for foreign-built vessels which will carry no more than twelve passengers for hire. A request for such a determination has been received by MARAD. By this notice, MARAD seeks comments from interested parties as to any effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. Information about the requestor's vessel, including a brief description of the proposed service, is listed below.
Coastwise Endorsement Eligibility Determination for a Foreign-Built Vessel: Pikku Kala (Motor); Invitation for Public Comments
The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to issue coastwise endorsement eligibility determinations for foreign-built vessels which will carry no more than twelve passengers for hire. A request for such a determination has been received by MARAD. By this notice, MARAD seeks comments from interested parties as to any effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. Information about the requestor's vessel, including a brief description of the proposed service, is listed below.
Notice of Railroad-Shipper Transportation Advisory Council Vacancy
The Board hereby gives notice of a vacancy on RSTAC for a large railroad representative. The Board seeks nominations for candidates to fill this vacancy.
Notice of Intent To Prepare a Supplemental Environmental Impact Statement for a Proposed Highway Project; Parsons, Tucker County, WV to Davis, Tucker County, WV
The FHWA, in coordination with the West Virginia Division of Highways (WVDOH) is issuing this Notice of Intent (NOI) to solicit comments and advise the public, agencies, and stakeholders that they intend to prepare a Supplemental Environmental Impact Statement (SEIS) for the Supplemental Final Environmental Impact Statement (SFEIS) (FHWA-WV-EIS-92-01-SD) for the 9-mile Appalachian Highway Corridor H Parsons to Davis Project in Tucker County, West Virginia. Persons and agencies who may be interested in or affected by the proposed project are encouraged to comment on the information in this NOI and the NOI Supplementary Information Document. All comments received in response to this NOI will be considered and any information presented herein may be revised in consideration of the comments.
Coastwise Endorsement Eligibility Determination for a Foreign-Built Vessel: Persuader (Sail); Invitation for Public Comments
The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to issue coastwise endorsement eligibility determinations for foreign-built vessels which will carry no more than twelve passengers for hire. A request for such a determination has been received by MARAD. By this notice, MARAD seeks comments from interested parties as to any effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. Information about the requestor's vessel, including a brief description of the proposed service, is listed below.
Coastwise Endorsement Eligibility Determination for a Foreign-Built Vessel: Ninjalove (Motor); Invitation for Public Comments
The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to issue coastwise endorsement eligibility determinations for foreign-built vessels which will carry no more than twelve passengers for hire. A request for such a determination has been received by MARAD. By this notice, MARAD seeks comments from interested parties as to any effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. Information about the requestor's vessel, including a brief description of the proposed service, is listed below.
Coastwise Endorsement Eligibility Determination for a Foreign-Built Vessel: Nauti Cat (Sail); Invitation for Public Comments
The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to issue coastwise endorsement eligibility determinations for foreign-built vessels which will carry no more than twelve passengers for hire. A request for such a determination has been received by MARAD. By this notice, MARAD seeks comments from interested parties as to any effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. Information about the requestor's vessel, including a brief description of the proposed service, is listed below.
Coastwise Endorsement Eligibility Determination for a Foreign-Built Vessel: Ghost Rider II (Motor); Invitation for Public Comments
The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to issue coastwise endorsement eligibility determinations for foreign-built vessels which will carry no more than twelve passengers for hire. A request for such a determination has been received by MARAD. By this notice, MARAD seeks comments from interested parties as to any effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. Information about the requestor's vessel, including a brief description of the proposed service, is listed below.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This proposed AD was prompted by a determination that the flight deck door decompression panel can strike the captain's seat headrest if a flight deck decompression event occurs when the seat is in a certain position. This proposed AD would require, for certain airplanes, replacing the affected captain's seat assembly. This proposed AD would also prohibit the installation of affected parts. The FAA is proposing this AD to address the unsafe condition on these products.
Amendment of Class D and Class E Airspace, and Removal of Class E Airspace; Jupiter, FL
This action amends Class D and Class E airspace extending upward from 700 feet above the surface for William P. Gwinn Airport, Jupiter, FL. This action increases the radius of the Class D airspace and amends verbiage in the Class D description. This action also updates the geographic coordinates for the Class E airspace extending upward from 700 feet above the surface. It revokes Class E airspace designated as an extension to a Class D surface area.
Airworthiness Directives; International Aero Engines, AG Engines
The FAA proposes to adopt a new airworthiness directive (AD) for certain International Aero Engines, AG (IAE AG) Model V2500 engines. This proposed AD was prompted by an analysis of an event involving an International Aero Engines, LLC (IAE LLC) Model PW1127GA- JM engine, which experienced a high-pressure compressor (HPC) 7th-stage integrally bladed rotor (IBR-7) separation that resulted in an aborted takeoff. This proposed AD would require performing an angled ultrasonic inspection (AUSI) of certain high-pressure turbine (HPT) 1st-stage hubs and HPT 2nd-stage hubs for cracks and replacing if necessary. This proposed AD would also require accelerated replacement of certain HPT 1st-stage hubs and HPT 2nd-stage hubs. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Helicopters
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus Helicopters Model AS332C, AS332C1, AS3322L, AS332L1, AS332L2, and EC225LP helicopters. This proposed AD was prompted by a report of cracks on the fuel filter bowl (bowl) due to over-torquing. This proposed AD would require visually inspecting the bowls of the right hand (RH) and left hand (LH) fuel filters for any cracks and seepage. Depending on the inspection results, this proposed AD would require removing an affected fuel filter from service and replacing that part. This proposed AD would also allow a certain fuel filter to be installed on a helicopter if certain actions are accomplished, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Helicopters
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus Helicopters Model SA-365N, SA-365N1, AS-365N2, and AS 365 N3 helicopters. This proposed AD was prompted by a report of an obstructed tail rotor (TR) pedal control that was blocked during flight. This proposed AD would require a one-time inspection for proper positioning of the TR actuator harness and cable ties installation and, depending on the results, accomplishing corrective action, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Amendments to the Commercial Driver's License Requirements; Increased Flexibility for Testing and for Drivers After Passing the Skills Test
FMCSA proposes to increase flexibility for State Driver Licensing Agencies (SDLAs) and commercial driver's license (CDL) applicants by expanding applicants' ability to take a CDL skills test in a State other than their State of domicile; permitting a commercial learner's permit (CLP) holder who has passed the CDL skills test to operate a commercial motor vehicle (CMV) on public roads without having a qualified CDL holder in the passenger seat; eliminating the requirement that an applicant wait at least 14 days to take the CDL skills test following initial issuance of the CLP. The NPRM also proposes to remove the requirement that CMV drivers must have a passenger (P) endorsement to transport CMVs designed to carry passengers, including school buses, when the vehicle is being transported in a driveaway-towaway operation and the vehicle is not carrying any passengers. Additionally, FMCSA proposes to require that third-party knowledge examiners be subject to the training, certification, and record check standards currently applicable to State knowledge examiners and third-party knowledge testers be subject to the auditing and monitoring requirements now applicable to third-party skills testers. The NPRM responds to petitions for rulemaking from the American Trucking Associations (ATA) and the New Hampshire Department of Transportation (NHDOT), as discussed below. FMCSA believes these proposals would improve the efficiency and convenience of CDL issuance and improve highway safety by further ensuring the integrity of third- party CDL knowledge testing.
Airworthiness Directives; MHI RJ Aviation ULC (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain MHI RJ Aviation ULC Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. This proposed AD was prompted by a determination that a more restrictive airworthiness limitation is necessary. This proposed AD would require revising the existing maintenance or inspection program, as applicable, to incorporate a more restrictive airworthiness limitation, as specified in a Transport Canada AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Pilatus Aircraft Ltd. Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2023-12-17, which applies to Pilatus Aircraft Ltd. (Pilatus) Model PC- 12, PC-12/45, PC-12/47, and PC-12/47E airplanes. AD 2023-12-17 requires revising the airworthiness limitation section (ALS) of the existing aircraft maintenance manual (AMM) or Instructions for Continued Airworthiness (ICA) for your airplane by introducing new and more restrictive instructions and maintenance tasks as specified in the component limitations section, which includes repetitive inspections for cracks in the lower main spar connection of the horizontal stabilizer. Since the FAA issued AD 2023-12-17, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This proposed AD would require revising the ALS of your existing AMM or ICA and your existing approved maintenance or inspection program, as applicable, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Agency Information Collection Activities: Requests for Comments; Clearance of a New Approval of Information Collection: Unmanned Aircraft System (UAS) Integration at Airports and Necessary Planning, Design, and Physical Infrastructure Needs
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval for a new information collection. The collection involves conducting research in the form of interviews with aviation stakeholders (e.g., airport/droneport operators, private entities, original equipment manufacturers, unmanned aircraft system (UAS) industry vendors, academia, representatives of the military, aviation stakeholders, etc.) to catalog current and planned droneport planning, design, and infrastructure needs, as well as find out which airports are integrating UAS into the airport environment. During each interview, the FAA will ask the stakeholders a specific set of questions, and if necessary, fact-specific follow-up questions will be posed to clarify and enhance the respondent's answers to the specified set of questions. The information to be collected is necessary because it will allow the FAA to understand how aviation stakeholders are integrating UAS into existing airport design standards/infrastructure and standalone facilities also referred to as droneports. Currently, no formal FAA definition of droneport currently exists. Based on the results of this research effort, the FAA may develop a formal definition for a droneport. For the purposes of this research effort, a modified version of the 14 Code of Federal Regulations Part 1 definition of `airport' is used to define droneport: `an area of land or water that is used or intended to be used for the landing and takeoff of UAS aircraft, and includes its buildings and facilities, if any.' The information collected will also be used to help the FAA to shape future droneport research efforts and possible standards and guidance material.
Aviation Rulemaking Advisory Committee; Meeting
This notice announces a meeting of the ARAC.
Parts and Accessories Necessary for Safe Operation; Exemption Renewal for Stoneridge, Inc.
FMCSA announces its decision to provisionally renew Stoneridge, Inc.'s (Stoneridge) exemption, which will allow motor carriers to operate commercial motor vehicles (CMV) with the company's MirrorEye\TM\ Camera Monitor System (CMS) installed as an alternative to the two rear-vision mirrors required by the Federal Motor Carrier Safety Regulations (FMCSRs). The exemption is renewed for 5 years, unless revoked earlier.
Special Conditions: Gulfstream Aerospace Corporation Model GVIII-G700 and GVIII-G800 Series Airplanes; Dynamic Test Requirements for Single- and Multiple-Occupant Side-Facing Seats With or Without Airbag Systems
This action proposes special conditions for the Gulfstream Aerospace Corporation (Gulfstream) Model GVIII-G700 and GVIII-G800 series airplanes. These airplanes will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. This design feature is side-facing seats oriented in the aircraft with the occupant facing 90 degrees to the direction of aircraft travel. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Engines
The FAA proposes to adopt a new airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd & Co KG (RRD) Model Trent 1000-A, Trent 1000-AE, Trent 1000-C, Trent 1000-CE, Trent 1000-D, Trent 1000-E, Trent 1000-G, and Trent 1000-H engines. This proposed AD was prompted by reports of cracking and separation of certain low-pressure turbine (LPT) stage 1 blade assemblies. This proposed AD would require initial and repetitive inspections of affected LPT stage 1 blade assemblies for cracking or separation and, depending on the results of the inspections, reduction of the inspection interval or replacement of the LPT stage 1 blade set and disk. This proposed AD would also prohibit the installation of an LPT disk or blade set assembly unless it is considered a serviceable part, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Qualification of Drivers; Exemption Applications; Epilepsy and Seizure Disorders
FMCSA announces its decision to renew exemptions for four individuals from the requirement in the Federal Motor Carrier Safety Regulations (FMCSRs) that interstate commercial motor vehicle (CMV) drivers have ``no established medical history or clinical diagnosis of epilepsy or any other condition which is likely to cause loss of consciousness or any loss of ability to control a CMV.'' The exemptions enable these individuals who have had one or more seizures and are taking anti-seizure medication to continue to operate CMVs in interstate commerce.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 777 airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) that found the force limiter assemblies for the lateral control mechanism are not breaking out within the maximum design force requirements. This AD requires replacing affected force limiter assemblies and prohibits the installation of affected parts. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 2020-26- 08, which applied to The Boeing Company Model 787-8, 787-9, and 787-10 airplanes powered by Rolls-Royce Trent 1000 engines. AD 2020-26-08 required repetitive inspections of the inner fixed structure (IFS) forward upper fire seal and thermal insulation blankets in the forward upper area of the thrust reverser (TR) for damage and applicable on- condition actions. Since the FAA issued AD 2020-26-08, the FAA determined that a new upper splitter fairing assembly is needed to prevent damage to the fire seal and thermal insulation blanket. This AD continues to require the actions specified in AD 2020-26-08 and requires determining if an affected part number of the upper splitter fairing assembly is installed on the engine, replacing an affected upper splitter fairing assembly part number with a new upper splitter fairing assembly part number, inspecting the IFS forward upper fire seal and thermal insulation blanket for any damage, and applicable on- condition actions. This AD also prohibits the installation of affected parts. The FAA is issuing this AD to address the unsafe condition on these products.
Northern Indiana Commuter Transportation District's Request To Amend Its Positive Train Control System
This document provides the public with notice that, on January 24, 2024, the Northern Indiana Commuter Transportation District (NICD) submitted a request for amendment (RFA) to its FRA-certified positive train control (PTC) system. FRA is publishing this notice and inviting public comment on the railroad's RFA to its PTC system.
Massachusetts Bay Transportation Authority's Request To Amend Its Positive Train Control System
This document provides the public with notice that, on January 24, 2024, the Massachusetts Bay Transportation Authority (MBTA) submitted a request for amendment (RFA) to its FRA-certified positive train control (PTC) system. FRA is publishing this notice and inviting public comment on the railroad's RFA to its PTC system.
Amendment of Class E Airspace; Litchfield, MN
This action amends the Class E airspace at Litchfield, MN. This action is the result of an airspace review conducted due to the decommissioning of the Darwin very high frequency omnidirectional range (VOR) as part of the VOR Minimum Operating Network (MON) Program. This action brings the airspace into compliance with FAA orders to support instrument flight rule (IFR) operations.
Amendment of Class E Airspace; Harrison, OH
This action amends the Class E airspace at Harrison, OH. This action is the result of an airspace review conducted due to the decommissioning of the Cincinnati very high frequency omnidirectional range (VOR) as part of the VOR Minimum Operating Network (MON) Program. The geographic coordinates of the airport are also being updated to coincide with the FAA's aeronautical database. This action brings the airspace into compliance with FAA orders to support instrument flight rule (IFR) operations.
Airworthiness Directives; Britten-Norman Aircraft, Ltd. Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all Britten-Norman Aircraft, Ltd. Model BN-2, BN-2A, BN-2A-2, BN- 2A-3, BN-2A-6, BN-2A-8, BN-2A-9, BN-2A-20, BN-2A-21, BN-2A-26, BN-2A- 27, BN-2B-20, BN-2B-21, BN-2B-26, BN-2B27, BN-2T, BN2T-4R, and BN2T-4S airplanes; and Model BN2A MK. III, BN2A MK. III-2, and BN2A MK. III-3 airplanes. This proposed AD was prompted by reports of electrical cable (Koiled Kord) and flight control cables interference with the control column. This proposed AD would require inspecting for interference between the control column, rudder pedal adjuster cable, and any wiring (including the Koiled Kord) concurrently with performing a flight control full and free movement inspection, and taking corrective actions if necessary. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-600, 737-700, and 737-800 series airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating the fuselage skin repairs at the double row of fasteners centered on certain stringers have inadequate inspection requirements for continuing airworthiness following repair accomplishment. This AD is intended to complete certain programs to support the airplane reaching its limit of validity (LOV). This AD requires repetitive inspections for cracks of skin repairs at Stringer S-17, and corrective actions if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company (Boeing) Model 787-8, 787-9, and 787-10 airplanes. This AD was prompted by reports of undetected water leaks from the faucet control module (FCM) migrating below the passenger floor in multiple lavatory locations during flight, and into the electronic equipment bay(s). This AD requires repetitive general visual inspections of the area under all lavatory washbasins for evidence of intermittent and active leaks at the FCM and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2022-01- 07, which applied to certain Airbus SAS Model A350-941 and -1041 airplanes. AD 2022-01-07 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD retains the actions required by AD 2022-01-07 and also requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300- 600 series airplanes). This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
