Department of Transportation September 18, 2023 – Federal Register Recent Federal Regulation Documents
Results 1 - 13 of 13
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPS) and associated Takeoff Minimums and Obstacle Departure procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Engines
The FAA proposes to supersede Airworthiness Directive (AD) 2021-25-04, which applies to certain Rolls-Royce Deutschland Ltd & Co KG (RRD) Model Trent 1000 engines. AD 2021-25-04 requires operators to revise the airworthiness limitations section (ALS) of their existing approved continuous airworthiness maintenance program by incorporating the revised tasks of the applicable time limits manual (TLM) for each affected model turbofan engine. Since the FAA issued AD 2021-25-04, the manufacturer revised the TLM to introduce new or more restrictive tasks and limitations and associated thresholds and intervals for life- limited parts, which prompted this proposed AD. This proposed AD would require revising the ALS of the operator's existing approved engine maintenance or inspection program, as applicable, to incorporate new or more restrictive tasks and limitations and associated thresholds and intervals for life-limited parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Engines
The FAA proposes to supersede Airworthiness Directive (AD) 2021-25-03, which applies to all Rolls-Royce Deutschland Ltd & Co KG (RRD) Model Trent 7000-72 and Trent 7000-72C engines. AD 2021-25-03 requires operators to revise the airworthiness limitation section (ALS) of their existing approved continuous airworthiness maintenance program by incorporating the revised tasks of the applicable time limits manual (TLM) for each affected model turbofan engine. Since the FAA issued AD 2021-25-03, the manufacturer again revised the TLM to introduce new or more restrictive tasks and limitations and associated thresholds and intervals for life-limited parts, which prompted this proposed AD. This proposed AD would require revising the ALS of the operator's existing approved engine maintenance or inspection program, as applicable, to incorporate new or more restrictive tasks and limitations and associated thresholds and intervals for life-limited parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Modification of Class E Airspace; Alliance Municipal Airport, Alliance, NE
This action delays the original effective date and changes the version of FAA Order JO 7400.11 amended in the final rule published on August 16, 2023. This action also republishes the text of that final rule modifying Class E airspace extending upward from 700 feet above the surface to adequately contain all instrument flight rule (IFR) procedures at Alliance Municipal Airport, NE. This action supports the safety and management of IFR operations at the airport.
Reciprocal Switching for Inadequate Service
This decision proposes, in a new subdocket, a new set of regulations that would provide for the prescription of reciprocal switching agreements to address inadequate rail service, as determined using objective standards based on a carrier's original estimated time of arrival, transit time, and first-mile and last-mile service. To help implement the new regulations, the Surface Transportation Board (Board or STB) proposes to require Class I carriers to submit certain data, which would be publicly accessible and generalized; and to adopt a new requirement that, upon written request by a customer, a rail carrier must provide to that customer individualized, machine-readable service data.
Reciprocal Switching
On July 27, 2016, in Docket No. EP 711 (Sub-No. 1), the Surface Transportation Board (Board or STB) proposed to revise its reciprocal switching regulations. After considering the full record and the developments in the freight rail industry, the Board has decided not to pursue those revisions and to close Docket No. EP 711 (Sub-No. 1). Instead, in Docket No. EP 711 (Sub-No. 2), the Board is proposing a new set of regulations that would provide access to reciprocal switching when there is inadequate service. The Board will continue to assess what other action, if any, the Board should take with respect to reciprocal switching.
Agency Information Collection Activity Under OMB Review: Title VI as It Applies to Federal Transit Administration (FTA) Grant Programs
In accordance with the Paperwork Reduction Act of 1995, this notice announces the intention of the Federal Transit Administration (FTA) to request the Office of Management and Budget (OMB) to approve the extension of a currently approved information collection: Title VI as it Applies to FTA Grant Programs.
Agency Information Collection Activity Under OMB Review: Metropolitan and Statewide and Nonmetropolitan Transportation Planning
In accordance with the Paperwork Reduction Act of 1995, this notice announces the intention of the Federal Transit Administration (FTA) to request the Office of Management and Budget (OMB) to approve the extension of a currently approved information collection: Metropolitan and Statewide and Nonmetropolitan Transportation Planning.
Agency Information Collection Activity Under OMB Review: Pre-Award, Post Delivery Audit Requirements Under Buy America
In accordance with the Paperwork Reduction Act of 1995, this notice announces the intention of the Federal Transit Administration (FTA) to request the Office of Management and Budget (OMB) to approve the extension of a currently approved information collection: Pre- Award, Post Delivery Audit Requirements Under Buy America.
Proposed Agency Information Collection Activities; Comment Request
Under the Paperwork Reduction Act of 1995 (PRA) and its implementing regulations, this notice announces that FRA is forwarding the Information Collection Request (ICR) summarized below to the Office of Management and Budget (OMB) for review and comment. The ICR describes the information collection and its expected burden. On July 5, 2023, FRA published a notice providing a 60-day period for public comment on the ICR.
Airworthiness Directives; General Electric Company Engines
The FAA is adopting a new airworthiness directive (AD) for certain General Electric Company (GE) Model GEnx-1B and GEnx-2B engines. This AD was prompted by a manufacturer investigation that revealed that certain stages 6-10 compressor rotor spools and forward seals were manufactured from powder metal material suspected to contain iron inclusion. This AD requires the replacement of the affected stages 6-10 compressor rotor spools and forward seals. The FAA is issuing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.