Department of Transportation September 2022 – Federal Register Recent Federal Regulation Documents

In accordance with the Paperwork Reduction Act of 1995, PHMSA invites public comments on its intent to request Office of Management and Budget (OMB) approval of a new, one-time information collection titled: ``Voluntary Adoption of API RP 1173 for Gas Distribution Systems.'' The proposed information collection would provide data necessary to prepare the report required by Section 205 of the Protecting Our Infrastructure of Pipelines and Enhancing Safety (PIPES) Act of 2020 for gas distribution systems.

These special conditions are issued for the Bombardier Model BD-700-1A10 and BD-700-1A11 airplanes. These airplanes, as modified by L2 Consulting Services, Inc., will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for airplanes. This design feature is associated with the installation of an electronic network system architecture that will allow increased connectivity to and access from external network sources, (e.g., operator networks, wireless devices, internet connectivity, service provider satellite communications, electronic flight bags, etc.) to the airplane's previously isolated electronic assets (networks, systems, and databases). The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

The FAA is superseding Airworthiness Directive (AD) 2017-10- 24, which applied to certain Airbus SAS Model A330-200 series airplanes, Model A330-200 Freighter series airplanes, and Model A330- 300 series airplanes; AD 2018-23-14, which applied to certain Airbus SAS Model A330-200 series airplanes, Model A330-200 Freighter series airplanes, and Model A330-300 series airplanes; and AD 2021-05-12, which applied to certain Airbus SAS Model A330-200 Freighter series airplanes. AD 2017-10-24, AD 2018-23-14, and AD 2021-05-12 require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD revises the applicability by adding airplanes. This AD continues to require the actions in AD 2018-23-14 and AD 2021-05-12, and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA proposes to rule and invite public comment on the release and sale of a 100.74-acre parcel of land at the Colorado Springs Airport.

The FAA is adopting a new airworthiness directive (AD) for all General Electric Company (GE) CT7-8A model turboshaft engines. This AD was prompted by the manufacturer revising the airworthiness limitations section (ALS) of the existing engine maintenance manual (EMM) to incorporate reduced life limits for certain stage 1 turbine aft cooling plates, stage 2 turbine forward cooling plates, turbine interstage seals, and stage 4 turbine disks. This AD requires revising the ALS of the existing EMM and the operator's existing approved maintenance or inspection program, as applicable, to incorporate reduced life limits for these parts. The FAA is issuing this AD to address the unsafe condition on these products.

This action amends Class D airspace, Class E Surface airspace, and Class E Airspace Designated as an Extension to Class D airspace at Martin State Airport, Baltimore, MD. This action replaces the Baltimore Very High Frequency Omnidirectional Range Collocated Tactical Air Navigation (VORTAC) with the term Point of Origin. Also, this action removes unnecessary verbiage from the descriptor header. In addition, this action makes an editorial change replacing the term Airport/ Facility Directory with the term Chart Supplement in the legal descriptions of associated Class D and E airspace and makes the editorial change replacing the term Notice to Airmen with the term Notice to Air Missions. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations in the area.

This notice details the application requirements and procedures to obtain grant funding for eligible projects under the Consolidated Rail Infrastructure and Safety Improvements Program for Fiscal Year 2022. This notice solicits applications for program funds made available by the Consolidated Appropriations Act, 2022 and the Infrastructure Investment and Jobs Act. This notice also solicits applications for projects under the Magnetic Levitation Technology Deployment Program, funded by the Consolidated Appropriations Act, 2021. The opportunity described in this notice is made available under Assistance Listings Number 20.325, ``Consolidated Rail Infrastructure and Safety Improvements,'' and Assistance Listings Number 20.318, ``Maglev Project SelectionSAFETEA- LU.''

The FAA is adopting a new airworthiness directive (AD) for all Dassault Aviation Model FALCON 7X airplanes. This AD was prompted by a report of a failed extension of inboard slats during the landing phase, which was not indicated to the flightcrew by the crew alerting system. This AD requires revising the existing airplane flight manual (AFM) to provide procedures for failed extension of inboard slats and flightcrew indication during landing, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is adopting a new airworthiness directive (AD) for certain CFM International, S.A. (CFM) LEAP-1A model turbofan engines. This AD was prompted by reports of two in-flight shutdowns (IFSDs) and subsequent investigation by the manufacturer that revealed cracks in the high-pressure turbine (HPT) rotor stage 1 blades. This AD requires initial and repetitive borescope inspections (BSIs) of the HPT rotor stage 1 blades. Depending on the results of the BSIs, this AD requires either additional BSIs at reduced intervals or replacement of the HPT rotor stage 1 blades. This AD also requires sending the inspection results to CFM if any unserviceable finding is found. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is adopting a new airworthiness directive (AD) for certain MT-Propeller Entwicklung GmbH MTV-5-1-( ), MTV-9-( ), MTV-11-( ), MTV-12-( ), MTV-14-B, MTV-14-D, MTV-15-( ), MTV-16-( ), MTV-17-( ), MTV-18-( ), MTV-20-( ), and MTV-27-( ) variable pitch propellers. This AD was prompted by reports of certain propeller blade lag screws that were manufactured with an improper surface finish, which results in reduced fatigue strength of these lag screws. This AD requires replacement of certain propeller blade lag screws with parts eligible for installation. The FAA is issuing this AD to address the unsafe condition on these products.

In accordance with the requirements of the Paperwork Reduction Act of 1995, this notice announces the intention of the BTS to request the Office of Management and Budget's (OMB's) approval for new iterations of an on-going biennial information collection related to the nation's ferry operations. The information collected from each Census will be used to produce a descriptive database of existing ferry operations. A summary report of census findings will also be published by BTS on the BTS web page: www.bts.gov/ncfo.

FMCSA announces that it has received an application from Flat Top Transport requesting an exemption from the hours-of-service (HOS) regulations. Flat Top Transport requests a four-month exemption for ``immediate and emergency delivery of dry and bulk food grade products to locations that supply stores and distribution centers nationally.'' FMCSA requests public comment on the applicant's request for exemption.

The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This AD was prompted by a report from Boeing that Rolls-Royce Deutschland Ltd & Co KG (RRD) discovered a design issue in the engine fuel feed system, which could result in fuel flow restrictions to both engines when ice that has accumulated in the airplane fuel feed system suddenly releases into the engines. This AD requires revising the existing airplane flight manual (AFM) to update the limitations on minimum fuel temperatures. The FAA is issuing this AD to address the unsafe condition on these products.

The U.S. Department of Transportation is extending the comment period for its Disadvantaged Business Enterprise (DBE) and Airport Concession DBE (ACDBE) notice of proposed rulemaking. The original comment period was scheduled to close on September 19, 2022. The extension is granted in response to requests received from stakeholders, who have stated the September 19 closing date does not provide sufficient time for them to prepare and submit of comments to the docket. The Department agrees to extend the comment period by 60 days. Therefore, the closing date for submission of comments is extended to October 31, 2022, which will provide those entities interested in commenting on the proposed rulemaking additional time to submit comments to the docket.