Department of Transportation February 23, 2022 – Federal Register Recent Federal Regulation Documents
Results 1 - 14 of 14
Airworthiness Directives; Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A318 series airplanes; Model A319-111, -112, - 113, -114, -115, -131, -132, -133, -151N, and -153N airplanes; and Model A320 and A321 series airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain De Havilland Aircraft of Canada Limited (type certificate previously held by Bombardier, Inc.) Model DHC-8-401 and -402 airplanes. This proposed AD was prompted by reports of a certain bolt at the pivot pin link being found missing or having stress corrosion cracking. This proposed AD would require a modification to the nose landing gear (NLG) shock strut assembly. The FAA is proposing this AD to address the unsafe condition on these products.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPS) and associated Takeoff Minimums and Obstacle Departure procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Airworthiness Directives; Bell Textron Canada Limited (Type Certificate Previously Held by Bell Helicopter Textron Canada Limited) Helicopters
The FAA proposes to supersede Airworthiness Directive (AD) 2019-11-05, which applies to Bell Helicopter Textron Canada Limited (now Bell Textron Canada Limited) Model 429 helicopters having certain tail rotor (TR) pitch link assemblies. AD 2019-11-05 requires inspecting the TR pitch link assemblies, and replacing certain pitch link bearings. Since the FAA issued AD 2019-11-05, the FAA has determined that all TR pitch link assemblies are affected by the unsafe condition. This proposed AD would continue to require the actions specified in AD 2019-11-05, and would revise the applicability and require inspections of certain other TR pitch link assemblies. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Sikorsky Aircraft Corporation Helicopters
The FAA proposes to supersede Airworthiness Directive (AD) 2020-26-13, which applies to certain Sikorsky Aircraft Corporation (Sikorsky) Model S-92A helicopters. AD 2020-26-13 requires establishing the life limit for certain part-numbered horizontal stabilizer root fittings FWD (forward root fittings) and certain part-numbered stabilizer strut fittings. AD 2020-26-13 also requires repetitively inspecting certain parts, and depending on the inspection results, removing parts from service. Finally AD 2020-26-13 prohibits installing certain stabilizer assemblies on any helicopter. Since the FAA issued AD 2020-26-13, the manufacturer notified the FAA that due to an error in the service information, certain part numbers in AD 2020-26-13 are incorrect. Also, the FAA determined that additional inspections are required to address the unsafe condition. This proposed AD would retain certain requirements and the prohibition for installing certain stabilizer assemblies on any helicopter from AD 2020-26-13 and would correct certain part numbers and require additional repetitive inspections. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Helicopters (Type Certificate Previously Held by Eurocopter France) Helicopters
The FAA is superseding Airworthiness Directive (AD) 2021-11- 25, which applied to certain Airbus Helicopters (type certificate previously held by Eurocopter France) Model AS350B3 and EC130T2 helicopters. AD 2021-11-25 required revising the existing rotorcraft flight manual (RFM) for your helicopter by inserting a new procedure (temporary). Since the FAA issued AD 2021-11-25, the manufacturer identified an additional affected full authority digital engine control (FADEC) part number and developed an optional modification for the affected FADECs. This AD requires revising the existing RFM for your helicopter by inserting a new procedure (temporary). This AD also requires, for helicopter on which an optional terminating action (installation of serviceable FADECs) was done, removing the applicable temporary procedure from the existing RFM for your helicopter. In addition, this AD also adds helicopters to the applicability. Furthermore, this AD prohibits the installation of an affected FADEC. The FAA is issuing this AD to address the unsafe condition on these products.
Agency Information Collection Activities; Renewal Information Collection Request: National Consumer Complaint Database
FMCSA announces its plan to submit the Information Collection Request (ICR) described below to the Office of Management and Budget (OMB) for review and approval and invites public comment. This renewal collection of information is for the National Consumer Complaint Database (NCCDB), which is an online interface allowing consumers, drivers, and others to file complaints against unsafe and unscrupulous companies and/or their employees, including shippers, receivers, and transportation intermediaries, depending on the type of complaint. These complaints cover a wide range of issues, including but not limited to driver harassment, coercion, movement of household goods, financial responsibility instruments for brokers and freight forwarders, Americans with Disability Act (ADA) compliance, Electronic Logging Device (ELD), Entry-Level Driver Training (ELDT), Medical Review Officer (MRO), and Substance Abuse Professional (SAP) complaints. FMCSA requests approval to renew the ICR titled ``National Consumer Complaint Database'' covered by OMB Control Number 2126-0067 in order to continue to collect consumer complaint information so FMCSA can use this data to take enforcement action, better inform FMCSA policies for safer motor carrier operations, and improve consumer protection.
Agency Information Collection Activities; Renewal of an Approved Information Collection: Financial Responsibility Motor Carriers, Freight Forwarders, and Brokers
In accordance with the Paperwork Reduction Act of 1995, FMCSA announces its plan to submit the Information Collection Request (ICR) described below to the Office of Management and Budget (OMB) for its review and approval and invites public comment. The purpose of this ICR, titled ``Financial Responsibility Motor Carriers, Freight Forwarders, and Brokers,'' is to provide registered motor carriers, property brokers, and freight forwarders a means of meeting financial responsibility filing requirements. This ICR sets forth the financial responsibility documentation requirements for motor carriers, freight forwarders, and brokers as a result of the Agency's jurisdictional statutes.
Consensus Standards, Light-Sport Aircraft, Notice No. NOA-21-01
This notice announces the availability of one new and two revised consensus standards relating to the provisions of the Certification of Aircraft and Airmen for the Operation of Light-Sport Aircraft rule. ASTM International (ASTM) Committee F37 on Light-Sport Aircraft developed the new and revised standards with FAA participation. The FAA finds the new and revised standards acceptable for certification under the provisions of the Certification of Aircraft and Airmen for the Operation of Light-Sport Aircraft rule.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This AD was prompted by a report that during a fleet sampling inspection, cracks were found on the inner cylinder pivot pins of the left and right main landing gear (MLG) on one of the airplanes. This AD requires repetitive lubrications of the left and right MLG truck beams and inner cylinder pivot joints; a review of the maintenance program documentation to verify that certain lubrication tasks are incorporated; repetitive inspections of the MLG inner cylinder pivot pins and inner cylinder bushings of the MLG truck beams and inner cylinder joints to detect friction, heat damage, excessive wear, cracking, and smearing of bushing material; and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
Amendment of Class E Airspace; Skaneateles, NY
This action amends Class E airspace extending upward from 700 feet above the surface at Skaneateles Aero Drome, Skaneateles, NY, to accommodate new area navigation (RNAV) global positioning system (GPS) standard instrument approach procedures (SIAPs) serving this airport, as well as updating the airport's name. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations in the area.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 737-8 airplanes. This proposed AD was prompted by a report that, during production, a small number of fasteners in certain locations of the center fuel tank were cap sealed on top of a black stripe of ink with a clear overcoat. This clear overcoat is not an approved surface for sealing and can potentially compromise sealant adhesion. Compromised sealant adhesion can, over time, affect the lightning-protection properties of the airplane. This proposed AD would require preparation of the affected surface areas to ensure that there is adequate sealant adhesion, and complete encapsulation of the discrepant fastener locations with the approved production sealant. The FAA is proposing this AD to address the unsafe condition on these products.
Pipeline Safety: Information Collection Activities, Gas and Liquid Pipeline Safety Program Performance Progress Report
In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the information collection request abstracted below is being forwarded to the Office of Management and Budget (OMB) for review and comment. A Federal Register notice with a 60-day comment period soliciting comments on the information collection was published on December 15, 2021.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
