Department of Transportation April 5, 2021 – Federal Register Recent Federal Regulation Documents

The FAA is adopting a new airworthiness directive (AD) for all Yabor[atilde] Ind[uacute]stria Aeron[aacute]utica S.A. Model EMB-135 and EMB-145 airplanes. This AD was prompted by a report involving disconnection of a side arm strut from the right main landing gear (MLG); a subsequent investigation found that the side arm strut lower bearing was installed inverted on the airplane. This AD requires doing a general visual inspection of the right and left MLG to verify certain conditions and doing all applicable on-condition actions, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

The FAA is adopting a new airworthiness directive (AD) for all Fokker Services B.V. Model F28 Mark 0070 and 0100 airplanes. This AD was prompted by a report indicating that a passenger door opened under residual cabin pressure during taxiing after landing, and following the display of the CAB PRESS CTL alert. This AD requires revising the existing airplane flight manual (AFM) to update the Cabin Pressurization Control Fault procedure, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is superseding Airworthiness Directive (AD) 2017-19- 25, which applied to all Airbus Defense and Space S.A. Model CN-235, CN-235-100, CN-235-200, and CN-235-300 airplanes; and Model C-295 airplanes. AD 2017-19-25 required repetitive inspections and operational checks of the affected fuel valves, and corrective actions if necessary. This AD continues to require repetitive inspections and operational checks of the affected fuel valves, and corrective actions if necessary, and also limits the installation of affected parts to those that are maintained in accordance with certain instructions, as specified in a European Union Aviation Safety Agency (EASA), which is incorporated by reference. This AD was prompted by a determination that it is necessary to limit the installation of affected parts specified in AD 2017-19-25 to those parts that are maintained in accordance with certain instructions. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A318, A319, A320, and A321 series airplanes. This AD was prompted by a report that the oil used to protect the nose landing gear (NLG) main fittings for transportation and storage was not removed before final heat treatment of the affected parts, possibly generating sub-surface cavities during heat treatment of the affected parts. This AD requires replacing each affected NLG main fitting with a serviceable part, as specified in a European Union Aviation Safety Agency (EASA), which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is superseding Airworthiness Directive (AD) 2015-05- 03, which applied to certain Bombardier, Inc. Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. AD 2015-05-03 required revising the existing maintenance or inspection program, as applicable, to incorporate new or revised maintenance requirements and airworthiness limitations, and incorporating structural repairs and modifications to preclude widespread fatigue damage (WFD). This AD continues to require the actions specified in AD 2015-05-03. This AD also requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, and incorporating additional structural repairs and modifications to preclude WFD. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary, as well as the corresponding structural repairs and modifications to preclude WFD. The FAA is issuing this AD to address the unsafe condition on these products.

This action proposes to modify restricted areas R-4102A and R- 4102B at Fort Devens, MA, by amending the boundaries of the areas to align with the boundaries of the Fort Devens installation; and by changing the time of designation to reflect actual usage of the airspace.