Department of Transportation 2020 – Federal Register Recent Federal Regulation Documents

The FAA is superseding Airworthiness Directive (AD) 2018-25- 04, which applied to certain C Series Aircraft Limited Partnership (CSALP) Model BD-500-1A10 and BD-500-1A11 airplanes. AD 2018-25-04 required repetitive inspections for any dislodged blow-out panel in the forward and aft cargo compartments, reporting of the inspection findings, and reinstallation if necessary. This new AD continues to require repetitive inspections, with a revised inspection interval, for affected panels that have not been replaced. This new AD also requires the replacement of affected blow-out panels with redesigned panels, which terminates the inspection requirement. This new AD also revises the applicability by removing certain airplanes. This AD was prompted by reports of dislodged cargo compartment blow-out panels. The FAA is issuing this AD to address the unsafe condition on these products.

This action amends the Class E airspace extending upward from 700 feet above the surface at Shenandoah Municipal Airport, Shenandoah, IA. This action is the result of airspace review caused by the decommissioning of the Shenandoah non-directional radio beacon (NDB), which provided navigation information for the instrument procedures at this airport. Airspace redesign is necessary for the safety and management of instrument flight rules (IFR) operations at this airport.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The collection involves information from commercial air tour operators on the numbers and types of air tours over national park units. The information to be collected will be used by the FAA and the National Park Service to track air tour operations over national parks and as background information in the development of air tour management plans and voluntary agreements for purposes of addressing any potential significant impacts from commercial air tour operations on the natural or cultural resources or visitor experience at the parks.

This action amends the Class E airspace extending upward from 700 feet above the surface at Ada Regional Airport, Ada, OK. This action is the result of an airspace review caused by the decommissioning of the Ada VHF omnidirectional range (VOR) navigation aid, which provided navigation information for the instrument procedures at this airport. The name of the airport is also being updated to coincide with the FAA's aeronautical database. Airspace redesign is necessary for the safety and management of instrument flight rules (IFR) operations at this airport.

This action proposes to amend the Class D airspace and Class E surface airspace at Wright-Patterson AFB, Dayton, OH, and Wilmington Air Park, Wilmington, OH; revoke the Class E airspace designated as an extension to Class D and Class E surface area at Wilmington Air Park; and amend the Class E airspace extending upward from 700 feet above the surface at Dayton-Phillipsburg Airport, Dayton, OH; Dayton-Wright Brothers Airport, Dayton, OH; Greene County-Lewis A. Jackson Regional Airport, Dayton, OH; James M. Cox Dayton International Airport, Dayton, OH; Wright-Patterson AFB; Grimes Field, Urbana, OH; and Wilmington Air Park; and establish Class E airspace extending upward from 700 feet above the surface at Springfield-Beckley Municipal Airport, Springfield, OH. The FAA is proposing this action as the result of airspace reviews caused by the decommissioning of the Springfield VHF omnidirectional range (VOR) navigation aid, which provided navigation information for the instrument procedures these airports, as part of the VOR Minimum Operational Network (MON) Program, and the decommissioning of the Springfield localizer and glideslope which provided navigation information for the instrument procedures at Springfield-Beckley Municipal Airport. The names of Dayton-Phillipsburg Airport, Dayton-Wright Brothers Airport, and Greene County-Lewis A. Jackson Regional Airport, and the geographic coordinates of Wright Patterson AFB, Dayton-Wright Brothers Airport, Greene County-Lewis A. Jackson Regional Airport, and Grimes Field would also be updated to coincide with the FAA's aeronautical database.

This action amends the Class E airspace extending upward from 700 feet above the surface at Roben-Hood Airport, Big Rapids, MI. This action is the result of airspace review caused by the cancellation and revision of the instrument procedures at this airport. The geographic coordinates of the airport would also be updated to coincide with the FAA's aeronautic database. Airspace redesign is necessary for the safety and management of instrument flight rules (IFR) operations at this airport.

This action proposes to amend the Class E airspace extending upward from 700 feet above the surface at Webster City Municipal Airport, Webster City, IA. The FAA is proposing this action as the result of an airspace review due to the decommissioning of the Webster City non-directional beacon (NDB) which provided navigation information to the instrument procedures at this airport. The geographic coordinates of the airport would also be updated to coincide with the FAA's aeronautic database.

FMCSA announces its decision to renew exemptions for 58 individuals from the vision requirement in the Federal Motor Carrier Safety Regulations (FMCSRs) for interstate commercial motor vehicle (CMV) drivers. The exemptions enable these individuals to continue to operate CMVs in interstate commerce without meeting the vision requirements in one eye.

The FAA is adopting a new airworthiness directive (AD) for AERMACCHI S.p.A. Models F.260, F.260B, F.260C, F.260D, F.260E, and F.260F airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as cracks on the body of the flap actuators. The FAA is issuing this AD to require actions to address the unsafe condition on these products.

In accordance with the procedures governing the application for, and the processing of, special permits from the Department of Transportation's Hazardous Material Regulations, notice is hereby given that the Office of Hazardous Materials Safety has received the application described herein.

The FAA proposes to supersede Airworthiness Directive (AD) 2017-19-24, which applies to certain Airbus SAS Model A318 series airplanes; Model A319-111, -112, -113, -114, -115, -131, -132, and -133 airplanes; Model A320-211, -212, -214, -231, -232, and -233 airplanes; and Model A321-111, -112, -131, -211, -212, -213, -231, and -232 airplanes. The FAA also proposes to supersede AD 2018-16-04, which applies to Airbus SAS Model A320-216, -251N, and -271N airplanes; and Model A321-251N, -253N, and -271N airplanes; as well as the models in AD 2017-19-24. Those ADs require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive maintenance requirements and airworthiness limitations. Since AD 2018-16-04 was issued, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This proposed AD would require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which will be incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products.

The FAA is adopting a new airworthiness directive (AD) for all Yabor[atilde] Ind[uacute]stria Aeron[aacute]utica S.A. Model ERJ 190- 300 and ERJ 190-400 airplanes. This AD was prompted by a failure propagation test, which revealed that when complete loss of the electrical digital current (DC) essential bus 2 was induced, the smoke detection system of the forward and aft electrical bays erroneously indicated the presence of smoke via the respective engine indication and crew alerting system (EICAS) messages. This AD requires revising the existing airplane flight manual (AFM) procedures associated with messages of smoke in the electronic bays presented on the EICAS, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) Brazilian AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

This action proposes to amend Class E airspace, designated a surface area, at Sitka Rocky Gutierrez Airport, Sitka, AK. To properly size the area, the extension southwest of the airport should be reduced. The extension northwest of the airport is not required and should be removed. This action also proposes to establish a Class E airspace area, designated as an extension to a Class D or Class E surface area, northwest of the airport. Additionally, this action proposes to properly size Class E airspace extending upward from 700 feet above the surface. The extension southwest of the airport should increase in size and the extension northwest of the airport is not required and should be removed. Further, this action proposes to remove Class E airspace extending upward from 1,200 feet above the surface. This area is wholly contained within the Alaska southeast en route area and duplication is not necessary. Lastly, this action proposes numerous administrative corrections to the airspace legal descriptions. This action would ensure the safety and management of IFR operations at the airport.

This action proposes to amend Class E airspace, designated a surface area, at Mc Grath Airport, McGrath, AK. To properly size the area, it should be reduced from a 7.6-mile radius to a 5.6-mile radius of the airport. This action also proposes to properly size Class E airspace extending upward from 700 feet above the surface. The extension north of the airport should increase in size to contain arriving and departing IFR aircraft. The extension to the southeast of the airport is not required and should be removed. Additionally, this action proposes to properly size Class E airspace extending upward from 1,200 feet above the surface. The area should be reduced from a 74-mile radius to a 45-mile radius of the airport. Lastly, this action proposes numerous administrative corrections to the airspace legal descriptions. This action would ensure the safety and management of IFR operations at the airport.

This action proposes to amend the Class E airspace extending upward from 700 feet above the surface at Athens Municipal Airport and Lochridge Ranch Airport, Athens, TX. The FAA is proposing this action as the result of airspace reviews caused by the decommissioning of the Athens non-directional beacon (NDB) which provided navigation information for the instrument procedures at these airports. The geographic coordinates of the Lochridge Ranch Airport and the name of the Crossroads NDB would also be updated to coincide with the FAA's aeronautical database. Airspace redesign is necessary for the safety and management of instrument flight rules (IFR) operations at these airports.

This action proposes to amend the Class D airspace and Class E airspace area designated as an extension to a Class D surface area and establish a Class E airspace extending upward from 700 feet above the surface at St. Louis Regional Airport, Alton/St. Louis, IL. The FAA is proposing this action as the result of an airspace review caused by the decommissioning of the outer marker to runway 29 at St. Louis Regional Airport which provided navigational information to this airport. The geographic coordinates of the airport would also be updated to coincide with the FAA's aeronautical database.

This action proposes to amend the Class D airspace, Class E surface area airspace, and Class E airspace extending upward from 700 feet above the surface at Erie International Airport/Tom Ridge Field, Erie, PA; revoke the Class E airspace area designated as an extension to Class D and Class E surface area at Erie International Airport/Tom Ridge Field; and amend the Class E airspace extending upward from 700 feet above the surface at Corry-Lawrence Airport, Corry, PA. The FAA is proposing this action as the result of airspace reviews due to the decommissioning of the Tidioute VHF omnidirectional range (VOR) navigation aid, which provided navigation information for the instrument procedures at these airports, as part of the VOR Minimum Operational Network (MON) Program.

This action removes Jet Route J-105 and amends VHF Omnidirectional Range (VOR) Federal airways V-15, V-63, V-272, and V- 583 in the vicinity of McAlester, OK. The modifications are necessary due to the planned decommissioning of the VOR portion of the McAlester, OK, VOR/Tactical Air Navigation (VORTAC) navigation aid (NAVAID), which provides navigation guidance for portions of the affected air traffic service (ATS) routes. The McAlester VOR is being decommissioned as part of the FAA's VOR Minimum Operational Network (MON) program.

In response to comments received in the notice of proposed rulemaking (NPRM) in this docket, the Surface Transportation Board (STB or Board) invites parties, through this supplemental notice of proposed rulemaking (SNPRM), to comment on certain modifications and additions to the minimum information requirements proposed in the NPRM.

The Surface Transportation Board (STB or Board) is issuing this policy statement, following public notice and comment, to provide the public with information on principles the Board would consider in evaluating the reasonableness of demurrage and accessorial rules and charges.

The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes, Model CL-600-2C10 (Regional Jet Series 700, 701 & 702) airplanes, Model CL-600-2D15 (Regional Jet Series 705) airplanes, and Model CL-600-2D24 (Regional Jet Series 900) airplanes; and all Bombardier, Inc., Model CL-600-2C11 (Regional Jet Series 550) airplanes. This AD was prompted by reports of fractured rudder primary feel unit shafts; a subsequent investigation determined that the fractures in the shafts are consistent with fatigue damage. This AD requires replacement of the rudder primary feel unit shaft. The FAA is issuing this AD to address the unsafe condition on these products.

This action revokes Class E airspace at Sloulin Field International Airport, Williston, ND, due to the airport's closure. This action also amends Class E airspace at Williston Basin International Airport, Williston, ND. The action establishes Class E airspace designated as a surface area. Additionally, this action amends Class E airspace extending upward from 700 feet above the surface by adding two extensions, one to the southeast and one to the north of the airport. Further, this action adds a Class E airspace area extending upward from 1,200 feet above the surface. Lastly, this action implements an administrative correction to the Class E5 airspace legal description's text header by updating the airport's geographic coordinate to match the FAA's aeronautical database.

This action proposes to amend the Class E airspace extending upward from 700 feet above the surface at Sedalia Regional Airport, Sedalia, MO. The FAA is proposing this action as the result of an airspace review due to the decommissioning of the Sedalia non- directional beacon (NDB) which provided navigation information to the instrument procedures at this airport. The name of the airport would also be updated to coincide with the FAA's aeronautic database. Airspace redesign is necessary for the safety and management of instrument flight rules (IFR) operations at this airport.

The FAA proposes to adopt a new airworthiness directive (AD) for all General Electric Company (GE) GEnx-1B64, 1B64/P1, -1B64/P2, - 1B67, -1B67/P1, -1B67P2, -1B70, -1B70/75/P1, -1B70/75/P2, -1B70/P1, - 1B70/P2, -1B70C/P1, -1B70C/P2, -1B74/75/P1, -1B74/75/P2, -1B76/P2, and -1B76A/P2 model turbofan engines. This proposed AD was prompted by reports of combustor case burn-through. This proposed AD would require installation of electronic engine control (EEC) software, version B205 or later. The FAA is proposing this AD to address the unsafe condition on these products.

The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. This proposed AD was prompted by significant changes made to the airworthiness limitations (AWLs) related to fuel tank ignition prevention and the nitrogen generation system. This proposed AD would require revising the existing maintenance or inspection program, as applicable, to incorporate the latest revision of the AWLs. The FAA is proposing this AD to address the unsafe condition on these products.