Department of Transportation May 18, 2020 – Federal Register Recent Federal Regulation Documents

The FAA is superseding Airworthiness Directive (AD) 2000-17- 09, AD 2008-04-19 R1, and AD 2015-26-09; and terminating all requirements of AD 2018-18-05; which applied to ATR-GIE Avions de Transport R[eacute]gional Model ATR42-200, -300, and -320 airplanes. AD 2018-18-05 required updating the maintenance or inspection program, as applicable, to incorporate new or more restrictive maintenance requirements and airworthiness limitations, and terminated the relevant requirements of AD 2000-17-09, AD 2008-04-19 R1, and AD 2015-26-09. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. The FAA is issuing this AD to address the unsafe condition on these products.

This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

The FMCSA announces its decision to grant Laydon Composites Ltd.'s (Laydon) application for a limited 5-year exemption to allow motor carriers to operate certain commercial motor vehicles (CMVs) that are equipped with Laydon's OptiTail\TM\ aerodynamic device with rear identification lamps and rear clearance lamps that are mounted lower than currently permitted by the Agency's regulations. The Agency has determined that locating the rear identification lamps and rear clearance lamps lower on the trailers and semitrailers, mounted at the same level as the stop lamps, tail lamps, and turn signals, will maintain a level of safety that is equivalent to, or greater than, the level of safety achieved without the exemption.

FMCSA announces its decision to grant Extreme Logistics, LLC (Extreme Logistics) an exemption from the requirement that all driving be completed within 14 hours of the beginning of the work shift. This exemption allows the applicant to exclude off-duty and sleeper-berth time, of any length, from the calculation of the 14-hour driving window. This exemption is applicable June 28-July 8, each year for several days prior to and several days following Independence Day celebrations. FMCSA has determined that the terms and conditions of the exemption will likely ensure a level of safety equivalent to, or greater than, the level of safety achieved without the exemption.

The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, and 747SR series airplanes. This proposed AD was prompted by reports of inboard foreflap departures from the airplane. This proposed AD would require repetitive replacement of certain parts; a general visual inspection to determine production configuration for certain parts; a repetitive lubrication of certain parts and a repetitive general visual inspection of certain parts for any exuding grease; repetitive detailed inspections of certain parts for loose or missing attachment bolts, cracks or bushing migration, cracks or gouges, or broken, binding, or missing rollers; repetitive detailed inspections of certain parts for cracks or corrosion; repetitive lubrication; and on-condition actions if necessary. The FAA is proposing this AD to address the unsafe condition on these products.

This amendment adopts miscellaneous amendments to the required IFR (instrument flight rules) altitudes and changeover points for certain Federal airways, jet routes, or direct routes for which a minimum or maximum en route authorized IFR altitude is prescribed. This regulatory action is needed because of changes occurring in the National Airspace System. These changes are designed to provide for the safe and efficient use of the navigable airspace under instrument conditions in the affected areas.