Department of Transportation August 15, 2019 – Federal Register Recent Federal Regulation Documents
Results 1 - 5 of 5
Airworthiness Directives; Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes); and Model A310 series airplanes. This AD was prompted by a determination that a certain aircraft maintenance manual (AMM) task provided instructions for a visual inspection of composite and metallic vertical tailplane (VTP) attachment fittings, but the inspection method did not specify detection of delamination length, which could possibly extend beyond the defined allowable limits. This AD requires a review of airplane maintenance records, and, depending on the results, one-time detailed and ultrasonic inspections of the affected parts and applicable corrective actions, as specified in a European Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Special Conditions: Pilatus Aircraft Ltd. Model PC-12/47E Airplanes; Autothrust System
These special conditions are issued for the Pilatus Aircraft Ltd. Model PC-12/47E airplane. This airplane will have a novel or unusual design feature associated with the use of an autothrust system. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting an airworthiness directive (AD) for certain The Boeing Company Model 737-8 and 737-9 airplanes. This AD requires a maintenance records check to determine if any main slat track assembly has been removed, an inspection of the main slat track assemblies for a suspect lot number or a lot number that cannot be determined, and applicable on-condition actions. This AD was prompted by a report that certain main slat track assemblies were manufactured incorrectly and are affected by hydrogen embrittlement. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model CL-600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes. This AD was prompted by a report that main landing gear (MLG) side stay actuators have been assembled using nonconforming split ball bearings. This AD requires verification of the serial numbers of the installed MLG side stay actuator assemblies, and replacement of the affected parts. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; 328 Support Services GmbH (Type Certificate Previously Held by AvCraft Aerospace GmbH; Fairchild Dornier GmbH; Dornier Luftfahrt GmbH) Airplanes
The FAA is adopting a new airworthiness directive (AD) for all 328 Support Services GmbH Model 328-100 airplanes. This AD was prompted by a report indicating that undetected cracks may develop at the roll spoiler bearing arms. This AD requires a one-time non-destructive test (NDT) inspection for cracks in the roll spoiler bearing arms and, if necessary, corrective actions. The agency is issuing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
