Department of Transportation August 30, 2016 – Federal Register Recent Federal Regulation Documents

Agency Requests for Renewal of a Previously Approved Information Collection(s): Information To Determine Seamen's Reemployment Rights-National Emergency
Document Number: 2016-20874
Type: Notice
Date: 2016-08-30
Agency: Maritime Administration, Department of Transportation
The Maritime Administration (MARAD) invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. This information will be used to determine if U.S. civilian mariners are eligible for re-employment rights under the Maritime Security Act of 1996. We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995, Public Law 104-13.
Request for Comments of a Previously Approved Information Collection
Document Number: 2016-20866
Type: Notice
Date: 2016-08-30
Agency: Department of Transportation
In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection Request (ICR) abstracted below is being forwarded to the Office of Management and Budget (OMB) for review and comments. A Federal Register Notice with a 60-day comment period soliciting comments on the following information collection was published on June 2, 2016 (35439 Federal Register, Vol. 81, No. 106).
Requested Administrative Waiver of the Coastwise Trade Laws: Vessel AFTER HOURS; Invitation for Public Comments
Document Number: 2016-20865
Type: Notice
Date: 2016-08-30
Agency: Maritime Administration, Department of Transportation
As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.
Notice of National Grain Car Council Meeting
Document Number: 2016-20848
Type: Notice
Date: 2016-08-30
Agency: Surface Transportation Board, Department of Transportation
Notice is hereby given of a meeting of the National Grain Car Council (NGCC), pursuant to the Federal Advisory Committee Act, 5 U.S.C., app. 2 10(a)(2).
Petition for Waiver of Compliance
Document Number: 2016-20846
Type: Notice
Date: 2016-08-30
Agency: Federal Railroad Administration, Department of Transportation
Petition for Waiver of Compliance
Document Number: 2016-20845
Type: Notice
Date: 2016-08-30
Agency: Federal Railroad Administration, Department of Transportation
Notice of Application for Approval of Discontinuance or Modification of a Railroad Signal System
Document Number: 2016-20844
Type: Notice
Date: 2016-08-30
Agency: Federal Railroad Administration, Department of Transportation
Assumption of Authorities
Document Number: 2016-20818
Type: Notice
Date: 2016-08-30
Agency: Federal Highway Administration, Department of Transportation
The Fixing America's Surface Transportation (FAST) Act builds on the authorities and requirements in the Safe, Accountable, Flexible, Efficient Transportation Equity Act: A Legacy for Users (SAFETEA-LU) and the Moving Ahead for Progress in the 21st Century Act (MAP-21). The FAST Act also builds on efforts under FHWA's Every Day Counts to accelerate delivery of surface transportation projects by institutionalizing best practices and expediting complex infrastructure projects. The Secretary, in cooperation with the States, must submit recommendations to the Committee on Transportation and Infrastructure of the House of Representatives and the Committee on Environment and Public Works of the Senate recommendations on legislation to permit the assumption of additional authorities by States. The FAST Act specifically asks for recommendations in the areas of real estate acquisition and project design. In order to implement section 1316 of the FAST Act, FHWA is soliciting feedback from States and other stakeholders on additional authorities to assume under title 23, including real estate acquisition and project design. The FHWA will collect suggestions during a 60-day period. At the end of that period, FHWA will assess suggestions prior to providing a Report to Congress.
Commercial Space Transportation Reusable Launch Vehicle and Reentry Licensing Regulations; Technical Amendment
Document Number: 2016-20815
Type: Rule
Date: 2016-08-30
Agency: Federal Aviation Administration, Department of Transportation
The FAA is publishing this action to correct minor, editorial errors in chapter III, part 431. The errors occurred in the Commercial Space Transportation Reusable Launch Vehicle and Reentry Licensing Regulations final rule, published in the Federal Register on September 19, 2000. That final rule amended commercial space transportation regulations for the launch and reentry of reusable launch vehicles (RLVs) to establish operational requirements for launches of RLVs and to implement the FAA's reentry licensing authority by prescribing requirements for obtaining a license to launch and reenter an RLV, to reenter a reentry vehicle, and to operate a reentry site. In that final rule, the FAA inadvertently made minor errors, which this technical amendment corrects.
Fixing America's Surface Transportation Act-Productive and Timely Expenditure of Funds
Document Number: 2016-20814
Type: Notice
Date: 2016-08-30
Agency: Federal Highway Administration, Department of Transportation
By this notice, FHWA announces a new Web site providing information and guidance on the use of programmatic approaches to project delivery in accordance with section 1421 of the Fixing America's Surface Transportation (FAST) Act (``Productive and Timely Expenditure of Funds''). The FHWA requests comments on what procedures, techniques, programmatic approaches, or best practices should be considered for inclusion on the Web site. In addition, FHWA is requesting comment on any information resources that are readily available regarding practices and procedures that avoid unnecessary delays, minimize cost overruns, and ensure the effective use of Federal funds.
Licensing and Safety Requirements for Launch; Technical Amendment
Document Number: 2016-20813
Type: Rule
Date: 2016-08-30
Agency: Federal Aviation Administration, Department of Transportation
The FAA is publishing this action to correct minor, editorial errors in chapter III, parts 415 and 417. These errors occurred in the Licensing and Safety Requirements for Launch final rule, published in the Federal Register on August 25, 2006. That final rule amended the commercial space transportation regulations governing the launch of expendable launch vehicles to address licensing and safety requirements for a launch. In that final rule, the FAA inadvertently made minor errors, which this technical amendment corrects.
Petition for Exemption; Summary of Petition Received; Fusion Flight, LLC
Document Number: 2016-20812
Type: Notice
Date: 2016-08-30
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Federal Aviation Administration Commercial Space Transportation Advisory Committee-Public Teleconference
Document Number: 2016-20796
Type: Notice
Date: 2016-08-30
Agency: Department of Transportation
Pursuant to the Federal Advisory Committee Act, notice is hereby given of a teleconference of the Commercial Space Transportation Advisory Committee (COMSTAC). The Teleconference will take place on Wednesday, September 14, 2016 starting at 3:00 p.m. Eastern Standard Time and will last approximately one hour. The agenda and call-in number will be posted at least one week in advance at http:// www.faa.gov/go/ast. The purpose of this teleconference is to review draft legislation proposed by Representative Jim Bridenstine, Oklahoma, 1st District, that would authorize the Department of Transportation to perform an enhanced version of its current payload review process and consult with its interagency partners to ensure the compliance of proposed commercial space activities with U.S. treaty obligations, and national security and foreign policy interests. Examples of the types of activities that could fall under this authority include commercial space stations, satellite servicing, space resource utilization, and operations beyond Earth orbit. The FAA recently used an ad-hoc version of this approach to authorize a U.S. company to carry out the first private mission on the Moon. Interested members of the public may submit relevant written statements for the COMSTAC members to consider under the advisory process. Statements may concern the issues and agenda items mentioned above and/or additional issues that may be relevant for the U.S. commercial space transportation industry. Interested parties wishing to submit written statements should contact Michael Beavin, COMSTAC Executive Director, (the Contact Person listed below) in writing (mail or email) by September 9, 2016, so that the information can be made available to COMSTAC members for their review and consideration before the September 14 teleconference. Written statements should be supplied in the following formats: one hard copy with original signature and/or one electronic copy via email. An agenda will be posted on the FAA Web site at www.faa.gov/go/ast. Individuals who plan to participate and need special assistance should inform the Contact Persons listed below in advance of the meeting.
Noise Exposure Map Notice for Baltimore/Washington International Thurgood Marshall Airport, Anne Arundel County, Maryland
Document Number: 2016-20795
Type: Notice
Date: 2016-08-30
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration (FAA) announces its determination that the noise exposure maps submitted by the Maryland Aviation Administration for Baltimore/Washington International Thurgood Marshall Airport under the provisions of 49 U.S.C. 47501 et seq. (Aviation Safety and Noise Abatement Act) and 14 CFR part 150 are in compliance with applicable requirements.
Waiver of Aeronautical Land-Use Assurance: Marshall Memorial Municipal Airport (MHL), Marshall, MO
Document Number: 2016-20793
Type: Notice
Date: 2016-08-30
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration (FAA) is considering a proposal from the City of Marshall (sponsor), Marshall, MO, to release a 15.42 acres of land from the federal obligation dedicating it to aeronautical use and to authorize this parcel to be used for revenue-producing, non- aeronautical purposes.
Qualification of Drivers; Exemption Applications; Diabetes Mellitus
Document Number: 2016-20783
Type: Notice
Date: 2016-08-30
Agency: Federal Motor Carrier Safety Administration, Department of Transportation
FMCSA confirms its decision to exempt 65 individuals from its rule prohibiting persons with insulin-treated diabetes mellitus (ITDM) from operating commercial motor vehicles (CMVs) in interstate commerce. The exemptions enable these individuals to operate CMVs in interstate commerce.
Qualification of Drivers; Exemption Applications; Diabetes Mellitus
Document Number: 2016-20782
Type: Notice
Date: 2016-08-30
Agency: Federal Motor Carrier Safety Administration, Department of Transportation
FMCSA confirms its decision to exempt 70 individuals from its rule prohibiting persons with insulin-treated diabetes mellitus (ITDM) from operating commercial motor vehicles (CMVs) in interstate commerce. The exemptions enable these individuals to operate CMVs in interstate commerce.
Qualification of Drivers; Exemption Applications; Diabetes Mellitus
Document Number: 2016-20781
Type: Notice
Date: 2016-08-30
Agency: Federal Motor Carrier Safety Administration, Department of Transportation
FMCSA confirms its decision to exempt 68 individuals from its rule prohibiting persons with insulin-treated diabetes mellitus (ITDM) from operating commercial motor vehicles (CMVs) in interstate commerce. The exemptions enable these individuals to operate CMVs in interstate commerce.
Qualification of Drivers; Exemption Applications; Diabetes Mellitus
Document Number: 2016-20777
Type: Notice
Date: 2016-08-30
Agency: Federal Motor Carrier Safety Administration, Department of Transportation
FMCSA announces receipt of applications from 37 individuals for exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM) operating commercial motor vehicles (CMVs) in interstate commerce. If granted, the exemptions would enable these individuals with ITDM to operate CMVs in interstate commerce.
Qualification of Drivers; Exemption Applications; Diabetes Mellitus
Document Number: 2016-20776
Type: Notice
Date: 2016-08-30
Agency: Federal Motor Carrier Safety Administration, Department of Transportation
FMCSA confirms its decision to exempt 57 individuals from its rule prohibiting persons with insulin-treated diabetes mellitus (ITDM) from operating commercial motor vehicles (CMVs) in interstate commerce. The exemptions enable these individuals to operate CMVs in interstate commerce.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2016-20704
Type: Proposed Rule
Date: 2016-08-30
Agency: Federal Aviation Administration, Department of Transportation
The FAA withdraws a notice of proposed rulemaking (NPRM) that proposed a new airworthiness directive (AD), which would have applied to certain The Boeing Company Model 737-700, -800, and -900ER series airplanes. The NPRM would have required repetitive inspections to detect cracking in the crown skin panel assembly. The NPRM would also have provided optional terminating action for the repetitive inspections. Since the NPRM was issued, all affected airplanes worldwide have had applicable terminating actions accomplished, and one airplane was mistakenly included in the applicability. Accordingly, the NPRM is withdrawn.
Airworthiness Directives; Airbus Airplanes
Document Number: 2016-20699
Type: Proposed Rule
Date: 2016-08-30
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all Airbus Model A300 series airplanes; Model A300 B4-600, B4-600R, and F4- 600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes); and Model A310 series airplanes. This proposed AD was prompted by reports of failure of an aft hinge bolt assembly in the nose landing gear (NLG) aft doors. This proposed AD would require replacement of the aft hinge bolt assembly in the left and right NLG aft doors, with new aft hinge bolt assemblies. We are proposing this AD to prevent failure of an aft hinge bolt assembly in an NLG aft door while the airplane is in flight, which could lead to an in-flight loss of an NLG aft door, and damage to the airplane.
Airworthiness Directives; Bombardier, Inc. Airplanes
Document Number: 2016-20691
Type: Proposed Rule
Date: 2016-08-30
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc. Model DHC-8-400 series airplanes. This AD was prompted by reports of interior emergency lights remaining ``ON'' following routine operational checks of the emergency light system. We are proposing this AD to require changing the wiring gauge for the affected emergency lights power supplies wiring to prevent overheating in the wires. Overheating can damage the wire insulation, causing a fire.
Airworthiness Directives; Airbus Airplanes
Document Number: 2016-20685
Type: Proposed Rule
Date: 2016-08-30
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all Airbus Model A300 B4-603, B4-620, and B4-622 airplanes; Model A300 B4- 605R and A300 B4-622R airplanes; and Model A300 C4-605R Variant F airplanes. This proposed AD was prompted by an in-service detection of cracks in the fuselage skin lap joints. This proposed AD would require an ultrasonic inspection of certain skin lap joints, and repair if necessary. We are proposing this AD to detect and correct cracks in certain skin lap joints. Such cracking could result in reduced structural integrity of the airplane.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (Embraer) Airplanes
Document Number: 2016-20684
Type: Proposed Rule
Date: 2016-08-30
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Empresa Brasileira de Aeronautica S.A. (Embraer) Empresa Brasileira de Aeronautica S.A. (Embraer) Model EMB-135BJ, -135ER, - 135KE, -135KL, and -135LR airplanes; and Model EMB-145, -145ER, -145MR, -145LR, -145XR, -145MP, and -145EP airplanes. This proposed AD was prompted by reports of main airspeed indication discrepancies during flight; these discrepancies resulted from ice blockages in certain pitot total pressure lines. This proposed AD would require an inspection for tube misalignment of the pitot number 1 and pitot number 2 tube assembly lines, and corrective actions if necessary; installation or replacement (as applicable) of a tube ribbon heater on the pitot number 1 and pitot number 2 tube assembly lines; and revision of the airplane flight manual (AFM) to provide certain procedures and airspeed tables for the flightcrew. We are proposing this AD to detect and correct water accumulating and freezing in the pitot number 1 and pitot number 2 total pressure lines, which could result in erroneous main airspeed indications and consequent reduced ability of the flightcrew to maintain safe flight and landing of the airplane.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2016-20683
Type: Proposed Rule
Date: 2016-08-30
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 747-400, -400D, and -400F series airplanes. This proposed AD was prompted by widespread corrosion damage that was found on the skin inner surface along the upper bulkhead at certain stations between certain stringers. This proposed AD would require repetitive inspections of the fuselage crown skin inner surface, and related investigative and corrective actions if necessary. This AD would also allow for terminating actions for some of the repetitive inspections. We are proposing this AD to detect and correct cracks and corrosion on the crown skin inner surface. If the cracks or corrosion are not repaired, the cracks can rapidly join together and can cause a sudden decompression and loss of structural integrity of the airplane.
Airworthiness Directives; Airbus Airplanes
Document Number: 2016-20681
Type: Proposed Rule
Date: 2016-08-30
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all Airbus Model A330-223F, -223, -321, -322, and -323 airplanes. The proposed AD was prompted by fatigue load analysis that determined the need for certain reduced inspection intervals and updated torque values of the forward mount pylon bolts. This proposed AD would require repetitive torque checks to determine if there are any loose or broken forward engine mount bolts, and, if necessary, replacement of all four forward engine mount bolts and associated nuts, inspection of the forward mount assembly, and repair. We are proposing this AD to detect and correct loose or broken bolts, which could lead to engine detachment in flight, and damage to the airplane.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2016-20676
Type: Proposed Rule
Date: 2016-08-30
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 767-200 and -300 series airplanes. This proposed AD was prompted by a report of a fire in the bilge area of the cargo compartment that burned through the insulation blankets that were intended to prevent smoke from migrating behind the cargo compartment sidewall liners and upward into the main cabin. This proposed AD would require replacing the cargo compartment insulation blankets on the left and right sides with new insulation blankets that incorporate fire stops. We are proposing this AD to prevent a fire in the bilge area of the cargo compartment burning through the insulation blankets and consequently allowing smoke to migrate behind the cargo compartment sidewall liners and upward into the main cabin.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2016-20673
Type: Proposed Rule
Date: 2016-08-30
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 737-300, -400, and -500 series airplanes. This proposed AD was prompted by an evaluation by the design approval holder (DAH) indicating that the fuselage skin is subject to widespread fatigue damage (WFD). This proposed AD would require modification of the lap joint, including related investigative actions and corrective actions if necessary. This proposed AD also would require repetitive post-modification inspections for cracking of the skin at critical fastener rows, and corrective actions if necessary. We are proposing this AD to detect and correct cracks at the lap joint skin that could link up and result in rapid decompression and loss of structural integrity of the airplane.
Airworthiness Directives; Sikorsky Aircraft Corporation Helicopters
Document Number: 2016-20672
Type: Proposed Rule
Date: 2016-08-30
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for Sikorsky Aircraft Corporation (Sikorsky) Model S-92A helicopters. This proposed AD would require removing from service the tail gearbox center housing (housing) when it has 12,200 or more hours time-in-service (TIS). This proposed AD is prompted by fatigue analysis conducted by Sikorsky that determined the housing required a retirement life. The proposed actions are intended to prevent a crack in the housing, which could lead to loss of tail rotor drive and loss of helicopter control.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2016-20667
Type: Proposed Rule
Date: 2016-08-30
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model 747-8 and 747-8F series airplanes. This proposed AD was prompted by reports of damaged vapor seals, block seals, and heat shield seals on the outboard pylons between the engine strut and aft fairing. This proposed AD would require repetitive inspections for heat damage of the vapor seals between the engine strut and aft fairing, and replacement of the seals with new seals if necessary. We are proposing this AD to detect and correct heat damage to the vapor seals between the engine strut and aft fairing. Such damage could allow flammable fluid leakage into the aft fairing, which could result in an uncontrolled fire in the engine strut.
Office of Hazardous Materials Safety; Actions on Special Permit Applications
Document Number: 2016-20590
Type: Notice
Date: 2016-08-30
Agency: Pipeline and Hazardous Materials Safety Administration, Department of Transportation
In accordance with the procedures governing the application for, and the processing of, special permits from the Department of Transportation's Hazardous Material Regulations (49 CFR part 107, subpart B), notice is hereby given of the actions on special permits applications in (July to July 2016). The mode of transportation involved are identified by a number in the ``Nature of Application'' portion of the table below as follows: 1Motor vehicle, 2Rail freight, 3Cargo vessel, 4Cargo aircraft only, 5Passenger-carrying aircraft. Application numbers prefixed by the letters EE represent applications for Emergency Special Permits. It should be noted that some of the sections cited were those in effect at the time certain special permits were issued.