Department of Transportation May 5, 2015 – Federal Register Recent Federal Regulation Documents
Results 1 - 9 of 9
Qualification of Drivers; Exemption Applications; Vision
FMCSA announces its decision to renew the exemptions from the vision requirement in the Federal Motor Carrier Safety Regulations for 10 individuals. FMCSA has statutory authority to exempt individuals from the vision requirement if the exemptions granted will not compromise safety. The Agency has concluded that granting these exemption renewals will provide a level of safety that is equivalent to or greater than the level of safety maintained without the exemptions for these commercial motor vehicle (CMV) drivers.
Qualification of Drivers; Exemption Applications; Vision
FMCSA announces its decision to renew the exemptions from the vision requirement in the Federal Motor Carrier Safety Regulations for 21 individuals. FMCSA has statutory authority to exempt individuals from the vision requirement if the exemptions granted will not compromise safety. The Agency has concluded that granting these exemption renewals will provide a level of safety that is equivalent to or greater than the level of safety maintained without the exemptions for these commercial motor vehicle (CMV) drivers.
Information on Claims Raised About State-Owned Airlines in Qatar and the UAE
This notice announces that the Departments of Commerce, State, and Transportation are interested in obtaining from interested stakeholders information regarding their views on claims that three foreign airlinesEmirates Airline, Etihad Airways, and Qatar Airways have received and are benefitting from subsidies from their homeland governments that are distorting the global aviation market.
Airworthiness Directives; The Boeing Company Airplanes
We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747- 200B, 747-300, 747SR, and 747SP series airplanes. This proposed AD was prompted by an evaluation by the design approval holder (DAH) indicating that certain fuselage skin lap joints are subject to widespread fatigue damage (WFD). This proposed AD would require repetitive post-modification inspections for cracking of the skin or internal doubler along the edge fastener rows of the modification, and repair if necessary. We are proposing this AD to detect and correct fatigue cracking in certain fuselage skin lap joints, which could result in rapid depressurization of the airplane.
Airworthiness Directives; The Boeing Company Airplanes
We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 747-100, -200B, -200C, -200F, -300, - 400, -400D, and -400F series airplanes. This proposed AD was prompted by reports of significant fuselage skin damage at certain parts of the dorsal fairing, due to wear from the dorsal fairing. This proposed AD would require repetitive detailed inspections for wear and cracks of the fuselage skin under the dorsal fairing, and related investigative and corrective actions if necessary. This proposed AD would also require repetitive post-repair external surface high frequency eddy current inspections of the blended areas of the skin and detailed inspections of the unrepaired areas, and related investigative and corrective actions if necessary. We are proposing this AD to detect and correct fuselage skin damage of the dorsal fairing area, which could result in skin cracking and consequent depressurization of the airplane.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Airworthiness Directives; DG Flugzeugbau GmbH Gliders
We are adopting a new airworthiness directive (AD) for DG Flugzeugbau GmbH Model DG-1000T gliders equipped with a Solo Kleinmotoren Model 2350 C engine that supersedes AD 2013-22-14 R1. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as engine shaft failure with consequent propeller detachment. We are issuing this AD to require actions to address the unsafe condition on these products.
Airworthiness Directives; Airbus Helicopters (Type Certificate Previously Held by Eurocopter France)
We are adopting a new airworthiness directive (AD) for Airbus Model EC225LP helicopters. This AD requires repetitive visual and tap test inspections of each main rotor blade (blade) leading edge stainless steel protective strip (strip) for a crack, cut, or blind or open debonding (debonding), and taking approved corrective measures. If there is a crack or if there is debonding that exceeds acceptable limits, this AD requires, before further flight, repairing or replacing the blade with an airworthy part. This AD was prompted by suspected water seepage through a crack in the blade strip resulting in significant debonding. The actions of this AD are intended to prevent loss of the blade strip, excessive vibrations induced by blade weight imbalance, and subsequent loss of control of the helicopter.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.