Department of Transportation June 5, 2013 – Federal Register Recent Federal Regulation Documents
Results 1 - 11 of 11
Proposed Modification of Class E Airspace; Brigham City, UT
This action proposes to modify Class E airspace at Brigham City Airport, Brigham City, UT. The proposed decommissioning of the Brigham City Nondirectional Radio Beacon (NDB) has made this action necessary for the safety and management of Instrument Flight Rules (IFR) operations at the airport. This action also would make an adjustment to the geographic coordinates of the airport.
Limitation on Claims Against Proposed Public Transportation Projects
This notice announces final environmental actions taken by the Federal Transit Administration (FTA) for projects in the following locations: Cleveland, OH and San Francisco, CA. The purpose of this notice is to announce publicly the environmental decisions by FTA on the subject projects and to activate the limitation on any claims that may challenge these final environmental actions.
Notice of Request for Revisions of an Information Collection
In accordance with the Paperwork Reduction Act of 1995, this notice announces the intention of the Federal Transit Administration (FTA) to request the Office of Management and Budget (OMB) to extend the following currently approved information collection: 49 U.S.C. 5330Rail Fixed Guideway Systems, State Safety Oversight.
Airworthiness Directives; Bell Helicopter Textron, Inc. Helicopters
We propose to adopt a new airworthiness directive (AD) for Bell Helicopter Textron, Inc. (Bell) Model 206A, 206B, 206L, 206L-1, 206L-3, 206L-4, and 407 helicopters with an Apical Industries, Inc. (Apical) emergency float kit installed under supplemental type certificate (STC) number SR01535LA. This proposed AD would require inspecting, labeling, and replacing the float inflation hoses. This proposed AD is prompted by an incident in which the floats installed on a helicopter failed to deploy. The proposed actions are intended to prevent failure of the emergency floatation gear to deploy during an emergency event.
National Freight Advisory Committee: Notice of Public Meeting
This notice announces a public meeting of the National Freight Advisory Committee (NFAC). The NFAC will provide information, advice, and recommendations to the U.S. Secretary of Transportation on matters relating to U.S. freight transportation, including implementation of the Moving Ahead for Progress in the 21st Century Act (MAP-21), Public Law 112-141.
Airworthiness Directives; Eurocopter France (Eurocopter) Helicopters
We propose to adopt a new airworthiness directive (AD) for Eurocopter Model SA-365N, SA-365N1, AS-365N2, AS 365 N3, EC 155B, EC155B1, AS332C, AS332L, AS332L1, AS332L2, and EC225LP helicopters with certain EADS Sogerma pilot and co-pilot seats installed. This proposed AD would require inspecting the rear beam of each seat to determine if all of the weld beads are present and replacing the seat if any weld bead is missing. This proposed AD is prompted by a maintenance inspection that discovered a missing weld bead on the rear beam of a pilot seat. The proposed actions are intended to prevent failure of the pilot and co-pilot seats and subsequent injury to the pilot or co- pilot.
Airworthiness Directives; Eurocopter France Helicopters
We propose to adopt a new airworthiness directive (AD) for Eurocopter France (Eurocopter) Model AS332C, AS332L, AS332L1, AS332L2, and EC225LP helicopters. This proposed AD would require inspecting the intermediate gearbox (IGB) fairing for a crack and inspecting the IGB fairing gutter (gutter), if installed, for a crack, separation, or interference. This proposed AD is prompted by reports of cracks, separation of the IGB fairing from the gutter and attachment supports, and subsequent interference with the tail rotor (TR) inclined drive shaft. The proposed actions are intended to detect a crack and prevent separation of the IGB fairing, which could result in interference with the TR inclined drive shaft and subsequent loss of control of the helicopter.
Airworthiness Directives; Agusta S.p.A. (Type Certificate Currently Held by AgustaWestland S.p.A.) Helicopters (Agusta)
We propose to adopt a new airworthiness directive (AD) for certain Agusta Model A109C, A109E, A109S, A109K2, and AW109SP helicopters. This proposed AD would require inspecting the lock wires securing the tail rotor (T/R) duplex bearing locking nut (locking nut) to determine whether any lock wires are missing or damaged. This proposed AD is prompted by reports of loosening T/R locking nuts, which if not corrected, could result in failure of the T/R and subsequent loss of control of the helicopter.
Railroad Workplace Safety; Adjacent-Track On-Track Safety for Roadway Workers
This document delays the effective date of the final rule published November 30, 2011, and scheduled to take effect on July 1, 2013. The final rule mandates that roadway workers comply with specified on-track safety procedures that railroads must adopt to protect those workers from the movement of trains or other on-track equipment on ``adjacent controlled track.'' FRA received two petitions for reconsideration of the final rule, and five comments in response to the March 8, 2012, final rule that requested comments on the petitions for reconsideration. The petitions and comments raised a number of substantive issues requiring a detailed response. As FRA's response to those petitions and comments is still being reviewed, this document delays the effective date of the final rule until July 1, 2014.
Safety Advisory: Compressed Gas Cylinders That Have Not Been Tested Properly
PHMSA has concluded that Shasta Fire Equipment, Inc. of Redding, CA, certified DOT-specification, exemption, and special permit cylinders with Requalification Identification Number (RIN) D183, between March 6, 2013 and May 6, 2013, without performing proper requalification testing to verify the suitability of the cylinders for continued service, as required by the Hazardous Materials Regulations (HMR; 49 CFR Parts 171-180).
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
