Department of Transportation October 17, 2012 – Federal Register Recent Federal Regulation Documents
Results 1 - 6 of 6
Airworthiness Directives; Piaggio Aero Industries S.p.A.
We are rescinding an airworthiness directive (AD) for all Piaggio Aero Industries S.p.A Model P-180 airplanes. That AD was prompted by mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Italy. We issued that AD to prevent the brake hydraulic fluid from leaking because of the brake assembly rods contacting the brake valve tubing, which could result in the inability to adequately stop the airplane during ground operations. Since we issued that AD, we have determined this is no longer an unsafe condition and that regularly scheduled annual inspections address this subject.
Airworthiness Directives; Bombardier, Inc. Airplanes
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model DHC-8-400 series airplanes. This AD was prompted by reports of alternating current (AC) generator failures in-service due to incomplete fusion in the weld joint of the rotor band assembly. This AD requires inspecting the AC generator to determine the part number, and replacing the AC generator if necessary. We are issuing this AD to prevent rotor windings from coming in contact with the generator housing, which could result in debris contaminating and potentially blocking the engine oil scavenge system, leading to loss of oil pressure and an in-flight shutdown of the engine.
Airworthiness Directives; Airbus Airplanes
We are superseding an existing airworthiness directive (AD) for all Airbus Model A318-111 and -112 airplanes; and all Model A319, A320, and A321 series airplanes. That AD currently requires revising the Airworthiness Limitations Section (ALS) of the Instructions for Continued Airworthiness to incorporate new limitations for fuel tank systems. This new AD requires revising the maintenance program to incorporate revised fuel maintenance and inspection tasks, and adds airplanes to the applicability. This AD was prompted by Airbus issuing more restrictive maintenance requirements and/or airworthiness limitations. We are issuing this AD to prevent the potential of ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in a fuel tank explosion and consequent loss of the airplane.
Airworthiness Directives; The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-200 and -200C series airplanes. This AD was prompted by a report of elevator vibration and bearing swage failures. This AD requires, for certain airplanes, repetitive inspections for any discrepancies (such as a gap or a loose spacer) of the aft attach lugs for the elevator tab control mechanism, and replacement if necessary; and, for other airplanes, contacting the FAA for inspection or repair instructions and doing the work specified in those instructions. We are issuing this AD to detect and correct discrepancies in the aft attach lugs for the elevator tab control mechanism, which could result in elevator and tab vibration. Consequent structural failure of the elevator or horizontal stabilizer could result in loss of structural integrity and loss of airplane control.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
