Department of Transportation November 30, 2011 – Federal Register Recent Federal Regulation Documents

Airworthiness Directives; Learjet Inc. Model 60 Airplanes
Document Number: 2011-30822
Type: Proposed Rule
Date: 2011-11-30
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Learjet Inc. Model 60 airplanes. This proposed AD was prompted by two incidents of swapped fire extinguishing wires. This proposed AD would require inspecting the electrical leads routed to the fire extinguishing containers for proper identification and missing labels, and to ensure the electrical leads are connected to the correct squibs; and corrective actions if necessary. We are proposing this AD to prevent the extinguishing agent of the fire extinguishing container from being delivered to the wrong engine in the event of an engine fire, and a consequent uncontrolled fire.
Airworthiness Directives; the Boeing Company Airplanes
Document Number: 2011-30821
Type: Proposed Rule
Date: 2011-11-30
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Boeing Company Model 777-200, -200LR, and -300ER series airplanes. This proposed AD was prompted by a report from the manufacturer indicating that the lowered ceiling support structure of Section 41, in airplanes incorporating the overhead space utilization (OSU) option, was found to be under-strength when subjected to a 9.0 g forward load. This proposed AD would require installing new structural members in and new tie rod(s) and attach fittings on the left and right sides of the lowered ceiling support structure. We are proposing this AD to prevent the forward lowered ceiling panels and support structure from becoming dislodged during an occurrence of a 9.0 g forward load and consequent injury to personnel or interference with an emergency evacuation.
Railroad Workplace Safety; Adjacent-Track On-Track Safety for Roadway Workers
Document Number: 2011-30250
Type: Rule
Date: 2011-11-30
Agency: Federal Railroad Administration, Department of Transportation
FRA is amending its regulations on railroad workplace safety to further reduce the risk of serious injury or death to roadway workers performing work with potentially distracting equipment near certain adjacent tracks. In particular, this final rule requires that roadway workers comply with specified on-track safety procedures that railroads must adopt to protect those workers from the movement of trains or other on-track equipment on ``adjacent controlled track.'' FRA defines ``adjacent controlled track'' to mean ``a controlled track whose track center is spaced 19 feet or less from the track center of the occupied track.'' These on-track safety procedures are required for each adjacent controlled track when a roadway work group with at least one of the roadway workers on the ground is engaged in a common task with on-track, self-propelled equipment or coupled equipment on an occupied track. In addition, FRA is removing the provision on preemptive effect.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.