Department of Transportation October 25, 2011 – Federal Register Recent Federal Regulation Documents
Results 1 - 21 of 21
Requested Administrative Waiver of the Coastwise Trade Laws: Vessel CAP II; Invitation for Public Comments
As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.
Reports, Forms and Recordkeeping Requirements; Agency Information Collection Activity Under OMB Review
In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection abstracted below has been forwarded to the Office of Management and Budget (OMB) for review and approval. The nature of the information collection is described as well as its expected burden. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on July 15, 2011, and comments were due by September 13, 2011. No comments were received.
Reports, Forms and Recordkeeping Requirements; Agency Information Collection Activity Under OMB Review
In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection abstracted below has been forwarded to the Office of Management and Budget (OMB) for review and approval. The nature of the information collection is described as well as its expected burden. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on July 15, 2011, and comments were due by September 13, 2011. No comments were received.
Mazda North American Operations, Grant of Petition for Decision of Inconsequential Noncompliance
Mazda North American Operations (MNAO),\1\ on behalf of Mazda Motor Corporation of Hiroshima, Japan (Mazda), has determined the lens of the headlamps equipped on certain 2004 through 2009 Mazda RX-8 model passenger cars, manufactured from April 1, 2003, to May 29, 2009, and certain 2006 through 2008 MX-5 model passenger cars, built from May 17, 2005, to November 27, 2008, failed to meet the requirements of paragraph S7.2(b) of Federal Motor Vehicle Safety Standard (FMVSS) No. 108 Lamps, Reflective Devices, and Associated Equipment. Mazda has filed an appropriate report pursuant to 49 CFR Part 573, Defect and Noncompliance Responsibility and Reports, dated December 16, 2009.
CFMOTO Powersports, Inc., Denial of Petition for Decision of Inconsequential Noncompliance
CFMOTO Powersports, Inc. (CFMOTO),\1\ agent for the Chunfeng Holding Group Hangshou Motorcycles Manufacturing Co., LTD. (formerly known as Zhejiang CFMOTO Power Co., Ltd. (CHG)) has determined that certain model year 2005-2009 CHG Model CF250T-3(V3) and CF250T-5(V5) motorcycles that CFMOTO imported did not fully comply with paragraph S5.2.1 of 49 CFR 571.123 Federal Motor Vehicle Safety Standard (FMVSS) No. 123, Motorcycle Controls and Displays. CFMOTO filed an appropriate report, dated January 13, 2010, pursuant to 49 CFR part 573, Defect and Noncompliance Responsibility and Reports. Specifically, CFMOTO estimated that approximately 6,405 model year 2005-2009 CHG model CF250T-3(V3) and CF250T-5(V5) motorcycles, produced January 1, 2005, through December 31, 2009 are affected (hereafter referred to as ``noncompliant vehicles'').
Airworthiness Directives; Rolls-Royce plc RB211-524 Series, RB211-Trent 700 Series, and RB211-Trent 800 Series Turbofan Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Rolls-Royce plc (RR) RB211-535 Series Turbofan Engines
We propose to supersede an existing airworthiness directive (AD) that applies to all RR RB211-535E4-37, -535E4-B-37, -535E4-B-75, and -535E4-C-37 turbofan engines. The existing AD currently requires performing initial and repetitive visual and fluorescent penetrant inspections (FPI) of the low-pressure (LP) turbine stage 1, 2, and 3 discs to detect cracks in the discs. Since we issued that AD, we determined that the definition of shop visit is too restrictive in the existing AD. This proposed AD would continue to require those inspections and would change the definition of a shop visit to be less restrictive. We are proposing this AD to correct the definition of shop visit, and to detect cracks in the LP turbine stage 1, 2, and 3 discs, which could result in an uncontained release of LP turbine blades and damage to the airplane.
Qualification of Drivers; Exemption Applications; Diabetes Mellitus
FMCSA announces receipt of applications from 18 individuals for exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM) operating commercial motor vehicles (CMVs) in interstate commerce. If granted, the exemptions would enable these individuals with ITDM to operate CMVs in interstate commerce.
Qualification of Drivers; Exemption Applications; Vision
FMCSA announces its decision to renew the exemptions from the vision requirement in the Federal Motor Carrier Safety Regulations for 20 individuals. FMCSA has statutory authority to exempt individuals from the vision requirement if the exemptions granted will not compromise safety. The Agency has concluded that granting these exemption renewals will provide a level of safety that is equivalent to or greater than the level of safety maintained without the exemptions for these commercial motor vehicle (CMV) drivers.
Greenhouse Gas Emissions Standards and Fuel Efficiency Standards for Medium- and Heavy-Duty Engines and Vehicles
This document contains corrections to the final rule regulations (49 CFR parts 523 and 535), which were published in the Federal Register of Thursday, September 15, 2011 (76 FR 57106). The regulations established fuel efficiency standards for medium- and heavy-duty engines and vehicles, as prescribed under the Energy Independence and Security Act (49 U.S.C. 32902(k)(2)).
Airworthiness Directives; EADS CASA (Type Certificate Previously Held by Construcciones Aeronauticas, S.A.) Airplanes
We propose to adopt a new airworthiness directive (AD) for certain Model CN-235-100, CN-235-200, and CN-235-300 airplanes. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; The Boeing Company Model 757 Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD would require repetitive detailed inspections for discrepancies of the horizontal stabilizer ballscrew assembly; repetitive lubrication of the horizontal stabilizer trim control system; repetitive measurements for discrepancies of the ballscrew to ballnut freeplay; and corrective actions if necessary. This proposed AD was prompted by a report of extensive corrosion of the ballscrew of the drive mechanism of the horizontal stabilizer trim actuator. We are proposing this AD to prevent undetected failure of the primary and secondary load paths for the ballscrew in the horizontal stabilizer, which could lead to loss of control of the horizontal stabilizer and consequent loss of control of the airplane.
Agency Information Collection Activities; Revision of a Currently-Approved Information Collection Request: Application for Certificate of Registration for Foreign Motor Carriers and Foreign Motor Private Carriers
In accordance with the Paperwork Reduction Act of 1995, FMCSA announces its plan to submit the Information Collection Request (ICR) described below to the Office of Management and Budget (OMB) for review and approval. The FMCSA requests approval to revise an ICR entitled, ``Application for Certificate of Registration for Foreign Motor Carriers and Foreign Motor Private Carriers,'' that requires Mexico- domiciled for-hire and private motor carriers to file an application Form OP-2 if they wish to register to transport property only within municipalities in the United States on the U.S.-Mexico international border or within the commercial zones of such municipalities. On July 22, 2011, FMCSA published a Federal Register notice allowing for a 60-day comment period on the ICR. No comments were received.
Airworthiness Directives; Airbus Model A310 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Establishment of Class E Airspace; Tatitlek, AK
This action establishes Class E airspace at Tatitlek, AK, to accommodate the creation of one standard instrument approach procedure at the Tatitlek Airport. The FAA is taking this action to enhance safety and management of Instrument Flight Rules (IFR) operations at the Tatitlek Airport.
Modification of Class B Airspace; Seattle, WA
This action modifies Seattle, WA Class B airspace to ensure the containment of large turbine-powered aircraft operating to and from the Seattle-Tacoma International Airport. The FAA is taking this action to enhance safety, improve the flow of air traffic, and reduce the potential for midair collision in the Seattle, WA terminal area.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Airworthiness Directives; Airbus Airplanes
We are adopting a new airworthiness directive (AD) for all Airbus Model A310 series airplanes; Model A300 B4-600, B4-600R, and F4- 600R series airplanes; and Model C4-605R variant F airplanes (collectively called A300-600 series airplanes). This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
