Department of Transportation 2008 – Federal Register Recent Federal Regulation Documents
Results 1,451 - 1,500 of 3,130
Notice of Final Federal Agency Actions on Proposed Highway in Alaska
This notice announces actions taken by the USACE and other Federal agencies that are final within the meaning of 23 U.S.C. 139(l)(1). The actions relate to a proposed highway project, the East Lynn Canal Highway, Alaska Route Number 7, from Echo Cove to Katz Point in the Haines and Juneau Boroughs, State of Alaska. Those actions grant a permit and approvals for the project.
Pipeline Safety: Dynamic Riser Inspection, Maintenance, and Monitoring Records on Offshore Floating Facilities.
To remind owners and operators of the importance of retaining inspection, maintenance, and monitoring records for dynamic risers located on offshore floating facilities.
Establishment of Class E Airspace; Salida, CO
This action will establish Class E airspace at Salida, CO. Controlled airspace is necessary to accommodate aircraft using a new Area Navigation (RNAV) Global Positioning System (GPS) Standard Instrument Approach Procedure (SIAP) at Harriet Alexander Field. This will improve the safety of Instrument Flight Rules (IFR) aircraft executing the new RNAV GPS SIAP at Harriet Alexander Field, Salida, CO.
Airworthiness Directives; Hartzell Propeller Inc. ( )HC-( )(2,3)Y(K,R)-2 Two- and Three-Bladed Compact Series Propellers
The FAA is adopting a new airworthiness directive (AD) for Hartzell Propeller Inc. left-hand rotating ( )HC-( )(2,3)Y(K,R)-2 two- and three-bladed, aluminum hub, ``compact'' series propellers, with hubs having a non-suffix serial number, and lubrication holes located on the shoulder of the hub blade socket. These propellers are installed on Lycoming Engines LIO-360 series and LO-360 series reciprocating engines installed on Piper Aircraft, Inc. Seneca PA-34-200 and Seminole PA-44-180, and Hawker Beechcraft Corporation Model 76 Duchess, airplanes. This AD requires initial and repetitive eddy current inspections (ECI), of the area around the lubrication holes of the hub blade sockets. This AD results from four reports of propeller hub cracks, including two in-flight blade separation events. We are issuing this AD to prevent failure of the propeller hub, which could result in blade separation and loss of control of the airplane.
Airworthiness Directives; Turbomeca S.A. Arrius 2F Turboshaft Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Dornier Model 328-100 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; ATR Model ATR42-200, -300, -320, -500 Airplanes; and Model ATR72-101, -201, -102, -202, -211, -212, and -212A Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Boeing Model 757 Airplanes Equipped With Rolls Royce RB211-535E Engines
We are adopting a new airworthiness directive (AD) for certain Boeing Model 757 airplanes equipped with Rolls Royce RB211-535E engines. This AD requires repetitive inspections for signs of damage of the aft hinge fittings and attachment bolts of the thrust reversers, and related investigative and corrective actions if necessary. This AD results from reports of several incidents of bolt failure at the aft hinge fittings of the thrust reversers due to, among other things, high operational loads. We are issuing this AD to prevent failure of the attachment bolts and consequent separation of a thrust reverser from the airplane during flight, which could result in structural damage to the airplane.
Airworthiness Directives; Boeing Model 767-200, -300, and -400ER Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Boeing Model 767-200, -300, and -400ER series airplanes. This AD requires an inspection to determine the manufacturer and manufacture date of the oxygen masks in the passenger service units and the flight attendant and lavatory oxygen boxes, as applicable. This AD also requires related investigative/corrective actions if necessary. This AD results from a report that several passenger masks with broken in-line flow indicators were found following a mask deployment. We are issuing this AD to prevent the in-line flow indicators of the passenger oxygen masks from fracturing and separating, which could inhibit oxygen flow to the masks and consequently result in exposure of the passengers and cabin attendants to hypoxia following a depressurization event.
Airworthiness Directives; Boeing Model 747-400, 747-400D, and 747-400F Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 747-400, 747-400D, and 747-400F series airplanes. This AD requires replacement of an electronic flight instrument system/ engine indicating and crew alerting system (EFIS/EICAS) interface unit (EIU) located on the E2-6 shelf of the main equipment center with a new or modified EIU. This AD results from two instances where all six integrated display units (IDUs) on the flight deck panels went blank in flight. We are issuing this AD to prevent loss of the IDUs due to failure of all three EIUs, which could result in the inability of the flightcrew to maintain safe flight and landing of the airplane.
Airworthiness Directives; Hawker Beechcraft Corporation (Type Certificates No. 3A15, No. 3A16, No. A23CE, and No. A30CE Previously Held by Raytheon Aircraft Company) F33 Series and Models G33, V35B, A36, A36TC, B36TC, 95-B55, D55, E55, A56TC, 58, 58P, 58TC, G58, and 77 Airplanes
The FAA adopts a new airworthiness directive (AD) for certain Hawker Beechcraft Corporation F33 series and Models G33, V35B, A36, A36TC, B36TC, 95-B55, D55, E55, A56TC, 58, 58P, 58TC, G58, and 77 airplanes. This AD requires you to replace certain circuit breaker toggle switches with improved design circuit breaker toggle switches. This AD results from reports of certain circuit breaker toggle switches used in various electrical systems throughout the affected airplanes overheating. We are issuing this AD to prevent failure of the circuit breaker toggle switch, which could result in smoke in the cockpit and the inability to turn off the switch.
Airworthiness Directives; Bombardier Model DHC-8-400 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Notice of Availability of a Draft Environmental Impact Statement (DEIS) for New Corporate Average Fuel Economy Standards; Notice of Public Hearing
NHTSA has prepared a Draft Environmental Impact Statement (DEIS) to disclose and analyze the potential environmental impacts of proposed Corporate Average Fuel Economy (CAFE) standards for model year (MY) 2011-2015 passenger cars and light trucks, which NHTSA recently proposed pursuant to the Energy Independence and Security Act of 2007, and a reasonable range of alternative standards. To inform decisionmakers and the public, the DEIS compares the potential environmental impacts of the proposed standards and alternative standards reflecting a full range of stringencies, and it analyzes direct, indirect, and cumulative impacts in proportion to their significance. The DEIS provides a detailed analysis of potential impacts on energy resources, air quality, and climate. The DEIS uses climate modeling and NHTSA's own computer model to provide quantitative estimates of potential impacts on air quality, carbon dioxide (CO2) emissions, global mean surface temperature, rainfall, and sea level rise. The DEIS provides a qualitative analysis of resources that may be impacted by changes in climate, such as freshwater resources, terrestrial ecosystems, coastal ecosystems, land use, human health, and environmental justice. It examines these impacts on the U.S. and on a global scale. In addition, the DEIS analyzes potential environmental impacts unrelated to climate change. NHTSA invites Federal, State, and local agencies, Indian tribes, and the public to submit written comments and participate in a public hearing on the DEIS using the instructions set forth in this notice. As described in the PROCEDURAL MATTERS section of this notice, each speaker should anticipate speaking for approximately ten minutes, although we may need to adjust the time for each speaker if there is a large turnout. To facilitate review of the DEIS, NHTSA has posted the DEIS on its Web site, and it will be available in the Docket identified by the docket number at the beginning of this notice.\1\ Copies in hard copy or electronic (CD-ROM) form have been mailed to all stakeholders on NHTSA's National Environmental Policy Act (NEPA) mailing list for the proposed CAFE standards, and NHTSA will mail a copy of the DEIS or a CD-ROM containing the Appendices to any other interested party who requests one. NHTSA will consider the public comments received on the DEIS in preparing final NEPA documents to support final CAFE standards for MY 2011-2015 passenger cars and light trucks, which NHTSA plans to issue later this year. The agency's NEPA analysis is informing NHTSA's development of those standards.
Notice of Final Federal Agency Actions on Proposed Highway in San Bernardino County, CA
This notice announces actions taken by the California Department of Transportation (Caltrans) pursuant to its assigned responsibilities under 23 U.S.C. 327 that are final within the meaning of 23 U.S.C. 139(l)(1). These actions relate to a proposed highway project, US-395 from post miles 19.05-35.6 in San Bernardino County, California. Those actions grant licenses, permits, and approval of the project.
Rescinding the Notice of Intent for an Environmental Impact Statement: Boulder, Broomfield, and Jefferson Counties, CO
This notice rescinds the Notice of Intent for preparing an Environmental Impact Statement that was issued on July 21, 2003, for a proposed transportation improvement project in Boulder, Broomfield, and Jefferson Counties, Colorado. The action is being taken because there are no federal or state funds identified to make the proposed transportation improvements in the corridor for the next 20 years. It is not known when federal or state funds may become available for these improvements therefore an Environmental Impact Statement will not be prepared until further notice.
Advisory Circulars: Extended Operations (ETOPS) and Polar Operations, AC 121-42B and Extended Operations (ETOPS) and Operations in the North Polar Area, AC 135-42
The issuance of Advisory Circular (AC) 121-42B, Extended Operations (ETOPS) and Polar Operations, provides certificate holders with guidance for obtaining operational approval to conduct ETOPS under 14 CFR part 121. The issuance of AC 135-42, Extended Operations (ETOPS) and Operations in the North Polar Area, provides certificate holders with guidance for obtaining operational approval to conduct Extended Operations (ETOPS) under 14 CFR part 135.
Airworthiness Directives; Eurocopter France Model AS 355 N Helicopters
We are adopting a new airworthiness directive (AD) for Eurocopter France Model AS 355 N helicopters. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The European Aviation Safety Agency (EASA), the technical agent for France, with which we have a bilateral agreement, states in the MCAI: ``This Airworthiness Directive (AD) is issued because it was found that the power drawn by the starter generators from the engines is above the consumption capacity at altitudes above 3,000 meters, declared for the engines of AS 355 N helicopters. Excessive power consumption of the starter generators reduces the engine surge margin, which can result in engine failure.'' After engine start, the starter generator functions as the normal operational electrical generator. We are issuing this AD to require actions that are intended to address this unsafe condition.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This Rule establishes, amends, suspends, or revokes STANDARD Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Airworthiness Directives; Viking Air Limited Models DHC-6-1, DHC-6-100, DHC-6-200, and DHC-6-300 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Viking Air Limited Models DHC-6-1, DHC-6-100, DHC-6-200, and DHC-6-300 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Availability of a Draft Environmental Assessment
Notice is hereby given that the U.S. Maritime Administration is issuing a Draft Programmatic Environmental Assessment (EA) for the Removal of Non-Retention Vessels from National Defense Reserve Fleet (NDRF) Sites for Disposal. The Draft EA has been prepared pursuant to the National Environmental Policy Act of 1969 (NEPA) (U.S.C. 4231 et seq.) in accordance with the Council on Environmental Quality (CEQ) regulations for implementing the procedural provisions of NEPA (40 CFR 1500-1508). The Maritime Administration invites comments on the Draft EA. The purpose of the Programmatic EA is to evaluate the potential environmental impacts from and alternatives to the Removal of Non- Retention Vessels from National Defense Reserve Fleet Sites for Disposal proposed by the Maritime Administration. The Maritime Administration is charged with disposing of obsolete ``non-retention'' U.S. government-owned merchant type vessels of 1,500 gross tons or more per Section 203 of the Federal Property and Administrative Services Act of 1949, as amended (40 U.S.C. 548 (2008)). Non-retention vessels are vessels that have been determined by the Maritime Administration to be of insufficient value for commercial or military operation by the Federal Government to merit further preservation. 46 U.S.C. 57102 (2008). The Maritime Administration's non-retention ships are located at three fleet anchorages in the James River, Virginia; Beaumont, Texas; and Suisun Bay, California. The Maritime Administration is proposing to tow obsolete vessels from these three fleet anchorages either to one of seven Maritime Administration-approved or provisionally approved recycling facilities across the United States, or to various locations (to be determined on a case-by-case basis) to be used as artificial reefs, or sold for reuse as limited by applicable law, or to be donated for use as memorials and museums, or to be used by the U.S. Navy in at-sea training exercises referred to as Sinking Exercises, or SINKEX, during which the Navy fires live munitions at the vessel to give trainees a better sense of the capabilities of Navy weaponry. Following the use of live fire, vessels are allowed to sink to the sea bottom.
Qualification of Drivers; Exemption Applications; Vision
FMCSA announces its decision to renew the exemptions from the vision requirement in the Federal Motor Carrier Safety Regulations for 58 individuals. FMCSA has statutory authority to exempt individuals from the vision requirement if the exemptions granted will not compromise safety. The Agency has concluded that granting these exemption renewals will provide a level of safety that is equivalent to, or greater than, the level of safety maintained without the exemptions for these commercial motor vehicle (CMV) drivers.
Request for Applications for the Federal Motor Carrier Safety Administration Medical Review Board
FMCSA solicits applications from interested physicians to serve on the Agency's Medical Review Board (MRB). The MRB, authorized by the Safe, Accountable, Flexible, Efficient Transportation Equity Act: A Legacy for Users (SAFETEA-LU), provides scientific advice to the Secretary of Transportation (the Secretary) and the FMCSA Administrator on medical issues relating to the physical qualification standards for commercial motor vehicle (CMV) drivers. In 2006, the Secretary appointed five physicians for 2-year terms to serve on the MRB. In 2008, the Secretary reappointed the physicians to the MRB, with the chairperson currently serving a 2-year term, and the other four members serving staggered 1-year terms. In 2009, the Secretary will appoint three new members to a 2-year term, and reappoint one of the current members to a 1-year term to ensure the MRB will operate continuously with five active members. As a result, the chairperson's and one of the members' terms will expire in 2010 and the other three members' terms will expire in 2011.
Reappointment of Representatives to the Unified Carrier Registration Agreement Board of Directors
FMCSA announces the reappointment of four Directors who serve on the Board of Directors that governs the Unified Carrier Registration (UCR) Agreement as the representatives from each of the four FMCSA service areas. The Safe, Accountable, Flexible, Efficient Transportation Equity Act: A Legacy for Users (SAFETEA-LU) created the UCR Agreement. Under the UCR Agreement, for-hire and private motor carriers, brokers, freight forwarders, and leasing companies provide registration and financial responsibility information and pay certain fees. The UCR Agreement replaced the Single State Registration System (SSRS), which was repealed January 1, 2007.
Airworthiness Directives; Eurocopter France Model AS355E, F, F1, F2, and N Helicopters
This document revises an earlier proposed superseding airworthiness directive (AD) for the specified Eurocopter France (ECF) model helicopters. That AD currently requires certain checks of the magnetic chip detector plug (chip detector) and the main gearbox (MGB) oil-sight glass, certain inspections of the lubrication pump (pump), and replacing the MGB and the pump with an airworthy MGB and pump, if necessary. Also, the AD requires that before a pump or MGB with any hours time-in-service (TIS) can be installed, it must meet the AD requirements. The earlier proposed superseding AD proposed retaining those requirements but proposed adding all serial-numbered pumps to the applicability. This supplemental proposal is prompted by an improved procedure for detecting oil pump wear earlier and is considered more accurate than the procedure proposed previously. The actions specified by the proposed AD are intended to implement improved procedures to detect a failing MGB oil pump, to prevent failure of the MGB pump, seizure of the MGB, loss of drive to an engine and main rotor, and subsequent loss of control of the helicopter.
Airworthiness Directives; Dowty Propellers Models R354/4-123-F/13; R354/4-123-F/20; R354/4-123-F/21; R375/4-123-F/21; R389/4-123-F/25; R354/4-123-F/26; and R390/4-123-F/27 Propellers
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) issued by the European Aviation Safety Agency (EASA) to identify and correct an unsafe condition on Dowty Propellers models R354/4-123-F/13; R354/4-123-F/20; R354/4-123-F/21; R375/4-123-F/21; R389/4-123-F/25; R354/4-123-F/26; and R390/4-123-F/27 propellers. The MCAI describes the unsafe condition as:
Environmental Impact Statement: Stark, Columbiana, and Carroll Counties, OH
The FHWA is issuing this notice to advise the public that the preparation of the Environmental Impact Statement (EIS) for a proposed transportation project in Stark, Columbiana, and Carroll Counties, Ohio is being placed on hold.
Environmental Impact Statement: Butler County, OH
The FHWA is issuing this notice to advise the public that the Notice of Intent published on October 6, 2000 to prepare an Environmental Impact Statement (EIS) for a proposed transportation project in Butler County, Ohio is being rescinded.
Executive Committee of the Aviation Rulemaking Advisory Committee; Meeting
The FAA is issuing this notice to advise the public of a meeting of the Executive Committee of the Aviation Rulemaking Advisory Committee.
Petition for Exemption; Summary of Petition Received
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Norfolk Southern Railway Company, Pan Am Railways, Inc., et al.-Joint Control and Operating/Pooling Agreements-Pan Am Southern, LLC
The Surface Transportation Board (Board) is accepting for consideration the primary application and related filings, filed on May 30, 2008, by Norfolk Southern Railway Company (Norfolk Southern), Pan Am Railways, Inc. (PARI) (a noncarrier railroad holding company), and two of PARI's rail carrier subsidiaries, Boston and Maine Corporation (B&M) and Springfield Terminal Railway Company (Springfield Terminal) (collectively, Applicants). The primary application seeks Board approval under 49 U.S.C. 11322 and 11323 of (1) the acquisition by Norfolk Southern and B&M of joint control and ownership of Pan Am Southern, LLC (PAS), a new rail carrier to be formed; and (2) the agreements by which Springfield Terminal would operate the lines of PAS and establish rates for PAS. The agreements for which approval and authorization are being sought by the application and the related filings will be referred to collectively as the Transaction.
Medical Certification Requirements as Part of the Commercial Driver's License; Availability of Supplemental Document
This notice advises the public that FMCSA is placing in the public docket an additional document that the Agency may rely on in support of a final rule to integrate information regarding the medical certification status of a driver into the commercial driver's license (CDL) process. FMCSA published a notice of proposed rulemaking (NPRM) on this matter on November 16, 2006. Because the involved state cost analysis document was completed after publication of the NPRM and subsequent public comment period, the Agency now dockets and invites comment on it.
Airworthiness Directives; Avions Marcel Dassault-Breguet Model Falcon 10 Airplanes
The FAA proposes to supersede an existing airworthiness directive (AD) that applies to all Avions Marcel Dassault-Breguet Model Falcon 10 airplanes. The existing AD currently requires either revising the airplane flight manual (AFM) and installing a placard in the flight deck to prohibit flight into known or forecasted icing conditions, or repetitively inspecting for delamination of the flexible hoses in the wing (slat) anti-icing system and performing corrective actions if necessary. The existing AD also requires replacement of the flexible hoses installed in the slat anti-icing systems, which ends the repetitive inspections. This proposed AD would continue to require replacement of the flexible hoses installed in the slat anti-icing systems with new hoses, but at intervals defined in flight hours instead of flight cycles. This proposed AD results from information we received from operators and the airplane manufacturer indicating that the repetitive interval for the required replacement deviated from the referenced service information. We are proposing this AD to prevent collapse of the flexible hoses in the slat anti-icing system, which could lead to insufficient anti-icing capability and, if icing is encountered in this situation, could result in reduced controllability of the airplane.
Common Carrier Obligation of Railroads-Transportation of Hazardous Materials
The Surface Transportation Board (Board) hereby gives notice of the rescheduling of its hearing regarding the common carrier obligation of railroads with respect to the transportation of hazardous materials.
IFR Altitudes; Miscellaneous Amendments
This amendment adopts miscellaneous amendments to the required IFR (instrument flight rules) altitudes and changeover points for certain Federal airways, jet routes, or direct routes for which a minimum or maximum en route authorized IFR altitude is prescribed. This regulatory action is needed because of changes occurring in the National Airspace System. These changes are designed to provide for the safe and efficient use of the navigable airspace under instrument conditions in the affected areas.
Declaration of Emergency Event
On June 11, 2008, the Administrator of the FRA determined that the recent flooding around the Midwest region of the United States constituted an emergency event as related to railroad operations. Accordingly, the Administrator activated the Emergency Relief Docket. This document provides notice of the Administrator's determination.
Amendment of Class E Airspace; Gettysburg, PA
This action confirms the effective date of a direct final rule published in the Federal Register (73 FR 8593) that modifies Class E Airspace at Gettysburg, PA. Additional controlled airspace at Gettysburg Regional Airport will now provide the controlled airspace required to support the new Copter Area Navigation (RNAV) Global Positioning System (GPS) 070 Point in Space (PinS) approach developed to facilitate helicopter medical flight arrivals and departures at Gettysburg Hospital, Gettysburg, PA.
Amendment of Class E Airspace; Indianapolis, IN
This action confirms the effective date of a direct final rule that establishes additional Class E airspace at Indianapolis, IN, published in the Federal Register April 2, 2008 (73 FR 17887) Docket No. FAA-2008-0163. This action also makes a minor correction to the geographic coordinates of Hendricks County Gordon Graham Field.
Establishment of Class E Airspace; Philippi, WV
This action establishes Class E airspace at Philippi, WV, to accommodate a new Area Navigation (RNAV) Global Positioning System (GPS) Standard Instrument Approach Procedures (SIAP) Runways (RWY) 08- 26 that has been developed for Philippi/Barbour County Regional Airport. As a result, controlled airspace extending upward from 700 feet Above Ground Level (AGL) is needed to contain the SIAP and for Instrument Flight Rule (IFR) operations at Philippi/Barbour County Regional Airport. The operating status of the airport will change from Visual Flight Rules (VFR) to include IFR operations concurrent with the publication of the SIAP.
Notice of Final Federal Agency Actions on Proposed Highways in Alaska
This notice announces actions taken by the FHWA that are final within the meaning of 23 U.S.C. 139(l)(1). The actions relate to various proposed highway projects in the State of Alaska. Those actions grant approvals for the projects.
Office of Small and Disadvantaged Business Utilization (OSDBU); Notice of Request for Renewal of Data Collection by the Office of Small and Disadvantaged Business Utilization's (OSDBU) Regional Small Business Transportation Resource Centers (SBTRCs); Agency Information Collection Activities; Request for Comments, Renewal and Approval of Information Collection(s): Regional Center Intake Form (DOT F 4500) and Regional Resource Center Monthly Report Form (DOT F 4502)
The Office of Small and Disadvantaged Business Utilization (OSDBU) invites public comments about our intention to request the Office of Management and Budget's (OMB) approval to renew information collection forms, associated with OSDBU. The collection involves the use of the Regional Center Intake Form which documents the type of assistance provided to each small business that is enrolled in the program. The use of the Regional Resource Center Monthly Report Form will highlight activities, such as counseling, marketing, meetings/ conferences, and services to businesses as completed during the month. The information will be used to ascertain whether the program is providing services to its constituency, the small business community, in a fair and equitable manner. The information collected is necessary to determine whether small businesses are participating in DOT funded and DOT assisted opportunities with the DOT. The Counseling Information Form has been terminated and the information contained in that form is now consolidated into the Regional Resource Center Monthly Report Form (formerly titled Monthly Report of Operations Form). To eliminate duplication and to streamline the data collection process, OSDBU revised the Monthly Report of Operations Form into the Regional Resource Center Monthly Report Form. We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995.
Airworthiness Directives; Bombardier Model DHC-8-400 Series Airplanes
The FAA is revising an earlier NPRM for an airworthiness directive (AD) that applies to certain Bombardier Model DHC-8-400 series airplanes. The original NPRM would have superseded an existing AD that currently requires inspecting all barrel nuts to determine if the barrel nuts have a certain marking, inspecting affected bolts to determine if the bolts are pre-loaded correctly, and replacing all hardware if the pre-load is incorrect. For airplanes on which the pre- load is correct, the existing AD requires doing repetitive visual inspections for cracking of the barrel nuts and cradles and replacing all hardware for all cracked barrel nuts. The existing AD also requires replacement of all hardware for certain affected barrel nuts that do not have cracking, which would end the repetitive inspections for those airplanes. The existing AD also provides an optional replacement for all affected barrel nuts. The original NPRM proposed to require replacement of all affected barrel nuts. The original NPRM resulted from reports of cracking in the barrel nuts at the four primary front spar wing-to-fuselage attachment joints. This new action revises the original NPRM by adding, for certain airplanes, application of a certain compound to the affected barrel nuts and bolts. We are proposing this supplemental NPRM to detect and correct cracking of the barrel nuts at the wing front spar wing-to-fuselage joints, which could result in reduced structural integrity of the wing-to-fuselage attachments and consequent detachment of the wing.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.