Department of Transportation October 1, 2008 – Federal Register Recent Federal Regulation Documents
Results 1 - 11 of 11
Mississippi Division; Notice To Rescind a Notice of Intent To Prepare an Environmental Impact Statement (EIS): Hinds and Madison Counties, MS
The FHWA is issuing this notice to advise the public that the Notice of Intent published on August 10, 2007 to prepare an Environmental Impact Statement (EIS) for a proposed Interstate type facility connecting I-55 with I-20 through Hinds and Madison counties is being rescinded.
Environmental Impact Statement: Cambria County, PA
This notice rescinds the previous Notice of Intent (issued July 14, 2001) to prepare an Environmental Impact Statement for improvements to State Route 56 through West End of Johnstown, Pennsylvania. Studied improvements extended from the east of Minersville to north of Oakhurst through Johnstown, Tannerville Coopersdale, Morrelville, Cambria City, and Minersville.
Agency Information Collection Activities: Notice of Request for Renewal of Two Previously Approved Information Collection
The FHWA invites public comments about our intention to request the Office of Management and Budget's (OMB) approval to renew two information collections, which are summarized below under SUPPLEMENTARY INFORMATION. We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD-2008-0092 at https://www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with 46 U.S.C. 12121 and MARAD's regulations at 46 CFR part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD-2008-0091 at https://www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with 46 U.S.C. 12121 and MARAD's regulations at 46 CFR part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.
Environmental Impact Statement: Jackson County, NC
The FHWA is issuing this notice to advise the public that an environmental impact statement will be prepared for a proposed highway project from NC 107 to U.S. 23-74 east of Sylva, Jackson County, NC. (TIP Project R-4745.)
Airworthiness Directives; Boeing Model 737-300, -400, and -500 Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Boeing Model 737-300, -400, and -500 series airplanes. This AD requires repetitive external detailed inspections or non-destructive inspections to detect cracks in the fuselage skin along the chem-mill steps at stringers S-1 and S-2R, between station (STA) 400 and STA 460, and repair if necessary. This AD results from reports of cracks in the fuselage skin common to stringer S-1 and between STA 400 and STA 460. We are issuing this AD to detect and correct fatigue cracking of the fuselage skin panels at the chem-mill steps, which could result in sudden fracture and failure of the fuselage skin panels, and consequent rapid decompression of the airplane.
Hazardous Materials Regulations: Minor Editorial Corrections and Clarifications
This final rule corrects editorial errors, makes minor regulatory changes and, in response to requests for clarification, improves the clarity of certain provisions in the Hazardous Materials Regulations (HMR). The intended effect of this rule is to enhance the accuracy and reduce misunderstandings of the regulations. The amendments contained in this rule are non-substantive changes.
Airworthiness Directives; Boeing Model 737-100, -200, -200C, -300, -400, and -500 Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Boeing Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD requires replacing the existing straight-to-90- degree hose assembly for the Lavatory ``A'' water supply. The replacement is a new straight hose assembly and a separate 90-degree elbow fitting. This AD results from a report of a separated hose assembly for the passenger water system. We are issuing this AD to prevent a water leak into the flight deck ceiling, which could result in an electrical short and possible loss of several functions essential to safe flight.
Airworthiness Directives; Boeing Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-300, 747-400, 747-400D, and 747SR Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Boeing Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747- 300, 747-400, 747-400D, and 747SR series airplanes. For certain airplanes, this AD requires a material type inspection to determine if the lower forward corner reveal of the number 3 main entry doors (MEDs) is a casting. If the reveals are castings, this AD requires repetitive inspections of the reveals for cracking, and corrective action if necessary. If the reveals are not castings, this AD requires a detailed inspection of the reveals for a sharp edge and repetitive inspections of the reveals for cracking, and corrective action if necessary. For certain other airplanes, this AD requires only a detailed inspection of the reveals for a sharp edge and repetitive inspections of the reveals for cracking, and corrective action if necessary. For certain other airplanes, this AD requires repetitive inspections of the reveals for cracking only, and corrective action if necessary. This AD also allows a certain replacement as an optional action for the material type inspection for certain airplanes. This AD results from reports of cracking and/or a sharp edge in the lower forward corner reveal of the number 3 MEDs. We are issuing this AD to detect and correct fatigue cracking of the lower forward corner reveal of the number 3 MEDs, which could lead to the door escape slide departing the airplane when the door is opened and the slide is deployed, and consequent injuries to passengers and crew using the door escape slide during an emergency evacuation.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
