Department of Transportation May 26, 2006 – Federal Register Recent Federal Regulation Documents
Results 1 - 20 of 20
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by Pub. L. 105-383 and Pub. L. 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket 2006-24881 at https:// dms.dot.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Pub. L. 105- 383 and MARAD's regulations at 46 CFR part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by Pub. L. 105-383 and Pub. L. 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket 2006-24894 https:// dms.dot.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Pub. L. 105- 383 and MARAD's regulations at 46 CFR part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by Pub. L. 105-383 and Pub. L. 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket 2006-24879 at https:// dms.dot.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Pub. L. 105- 383 and MARAD's regulations at 46 CFR part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by Pub. L. 105-383 and Pub. L. 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket 2006-24882 at https:// dms.dot.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Pub. L. 105- 383 and MARAD's regulations at 46 CFR part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by Pub. L. 105-383 and Pub. L. 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket 2006-24880 at https://dms.dot.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Pub. L. 105-383 and MARAD's regulations at 46 CFR part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by Public Law 105-383 and Public Law 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket 2006-24883 at https:// dms.dot.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Public Law 105-383 and MARAD's regulations at 46 CFR part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.
Denial of Motor Vehicle Defect Petition
This notice sets forth the reasons for the denial of a petition submitted by Mr. Brad Lamb to NHTSA's Office of Defects Investigation (ODI), received December 2, 2005, under 49 U.S.C. 30162, requesting that the agency commence a proceeding to determine the existence of a defect related to motor vehicle safety with respect to the parking brakes on: (1) Model year (MY) 1999-2003 Chevrolet Silverado and GMC Sierra pickup trucks; (2) MY 2002-2003 Cadillac Escalade and Chevrolet Avalanche sport-utility vehicles (SUV); and (3) MY 2000-2003 Chevrolet Suburban/Tahoe and GMC Yukon SUV. After a review of the petition and other information, NHTSA has concluded that further expenditure of the agency's investigative resources on the issues raised by the petition does not appear to be warranted. The agency accordingly has denied the petition. The petition is hereinafter identified as DP05-009.
Airworthiness Directives; Boeing Model 777-200, -300, and -300ER Series Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Boeing Model 777-200, -300, and -300ER series airplanes. This proposed AD would require replacement of the gimbal plates of the left and right outboard trailing edge flaps with improved gimbal plates and other specified actions. This proposed AD results from a broken pivot link found on the inboard support for the outboard trailing edge flap. We are proposing this AD to prevent disconnection of the drive arm from its drive gimbal, due to a broken pivot link on an outboard flap support, which could result in unexpected roll of the airplane and loss of control of the airplane.
Airworthiness Directives; Airbus Model A330 Airplanes and Model A340-200 and -300 Series Airplanes
The FAA is revising an earlier NPRM for an airworthiness directive (AD) that applies to certain Airbus Model A330 airplanes and Model A340-200 and -300 series airplanes. The original NPRM would have required repetitive detailed inspections for cracking in the aft web of support rib 6 between certain bottom skin stringers on both wings; high frequency eddy current inspections for cracking of the attachment holes of the fuel pipes, and repair if necessary. The original NPRM also would have provided for an optional modification, which would extend a certain inspection threshold. The original NPRM resulted from a report of significant cracking found in the aft web of support rib 6 on both wings. This action revises the original NPRM by mandating, for certain airplanes, a new modification of support rib 6 on both wings, which would end the repetitive inspection requirement. This action also reduces the applicability in the original NPRM. We are proposing this supplemental NPRM to prevent cracking in the aft web of support rib 6, which could result in overloading of adjacent ribs and the surrounding wing structure and consequent reduced structural integrity of the wing.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-135BJ, -135ER, -135KE, -135KL, and -135LR Airplanes; and Model EMB-145, -145ER, -145MR, -145LR, -145XR, -145MP, and -145EP Airplanes
The FAA is revising an earlier NPRM for an airworthiness directive (AD) that applies to certain EMBRAER Model EMB-135 and -145 series airplanes. The original NPRM would have required determining the torque values of the screws that attach the seat tracks to the airplane, and corrective action if necessary. The original NPRM resulted from a report of undertorqued screws. This action revises the original NPRM by referring to revised service information and expanding the applicability. We are proposing this supplemental NPRM to prevent improper torque of those screws, which in the case of a hard landing or a high deceleration impact condition could result in damage to the seat and possible subsequent injury to the passenger.
Airworthiness Directives; Boeing Model 737-300, -400, -500, -600, -700, -700C, -800, and -900 Series Airplanes
The FAA is revising an earlier proposed airworthiness directive (AD) for certain Boeing Model 737-300, -400, -500, -600, - 700, -700C, -800, and -900 series airplanes. The original NPRM would have required modifying the wiring for the master dim and test system. For certain airplanes, the original NPRM also proposed to require related concurrent actions as necessary. The original NPRM resulted from a report that the master dim and test system circuit does not have wiring separation of the test ground signal for redundant equipment in the flight compartment. This action revises the original NPRM by adding a new concurrent action for certain airplanes, extending the compliance time, and removing certain airplanes from concurrent requirements. We are proposing this supplemental NPRM to prevent a single fault failure in flight from simulating a test condition and showing test patterns instead of the selected radio frequencies on the communications panels, which could inhibit communication between the flightcrew and the control tower, affecting the continued safe flight of the airplane.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-135BJ and EMB-145XR Airplanes
This document revises an earlier supplemental notice of proposed rulemaking (NPRM), applicable to certain Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-135BJ and Model EMB-145XR airplanes. The first supplemental NPRM would have required, for all airplanes, installation of an additional indication device to the clear-ice indication system. For certain airplanes, the first supplemental NPRM would also have required replacing the existing clear-ice indication lamp with a new, improved lamp. For certain other airplanes, the first supplemental NPRM would also have required modifying certain electrical connections to add an indication device to the clear-ice indication system; removing a certain placard; and re- activating the clear-ice additional indicator lamp. This new action revises the first supplemental NPRM by adding airplanes to the applicability. The actions specified by this new proposed supplemental NPRM are intended to prevent undetected build-up of clear ice on the wing surfaces, which could lead to reduced controllability of the airplane. This action is intended to address the identified unsafe condition.
Airworthiness Directives; Boeing Model 737-300, -400, -500, -600, -700, -700C, -800, and -900, and 747-400 Series Airplanes; and Model 757, 767, and 777 Airplanes
This document revises an earlier proposed airworthiness directive (AD), applicable to certain Boeing Model 737-300, -400, -500, -600, -700, -700C, -800, and -900, and 747-400 series airplanes; and Model 757, 767, and 777 airplanes. The original NPRM would have required modifying the static inverter by relocating resistor R170 of the static inverter bridge assembly. This new action revises the original NPRM by adding a new requirement for modifying the static inverter by replacing resistor R170 with a new resistor and relocating the new resistor. The actions proposed by this supplemental NPRM are intended to prevent a standby static inverter from overheating, which could result in smoke in the flight deck and cabin and loss of the electrical standby power system. This action is intended to address the identified unsafe condition.
Environmental Impact Statement; Humboldt County, CA
The FHWA is republishing this notice to advise the public that an Environmental Impact Statement (EIS) will be prepared for the proposed highway project along U.S. Highway (Highway) 101 in Humboldt County, in the Cities of Eureka and Arcata, and the unincorporated area between the two cities, California. The original Notice of Intent (NOI) was published in the Federal Register on August 31, 2001, (Volume 66, Number 170, Pages 46061 & 46062). The NOI is being republished due to project changes of adding roadway rehabilitation work and new alternatives to the proposed project.
Airworthiness Directives; Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. This AD requires revising the Airworthiness Limitations section of the Instructions for Continuing Airworthiness of the Maintenance Requirements Manual to include revised threshold and repeat inspection intervals for the cargo door skin cut-out. This AD results from a report that a crack was discovered at the lower forward corner of a cargo door skin cut-out during fatigue testing. We are issuing this AD to detect and correct cracking in the lower forward corner of the cargo door skin cut-out, which could result in reduced structural integrity of the airplane.
Airworthiness Directives; Boeing Model 767 Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Boeing Model 767 airplanes. This AD requires repetitive measurements of the rudder and elevator freeplay, repetitive lubrication of rudder and elevator components, and related investigative/corrective actions if necessary. This AD results from reports of freeplay-induced vibration of the rudder and the elevator. The potential for vibration of the control surface should be avoided because the point of transition from vibration to divergent flutter is unknown. We are issuing this AD to prevent excessive vibration of the airframe during flight, which could result in loss of control of the airplane.
Airworthiness Directives; Boeing Model 777-200 and -300 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 777-200 and -300 series airplanes. This AD requires replacing the battery packs of the emergency power assist system (EPAS) of the left and right non-overwing exit doors with new or modified battery packs. This AD results from intermittent failures of the EPAS battery pack found during testing, which are due to switch contamination, cam alignment problems, and inadequate self-test capability. We are issuing this AD to prevent failure of the EPAS, which could result in the inability to open the exit door during an emergency evacuation.
Airworthiness Directives; Boeing Model 757 Airplanes
The FAA is superseding an existing airworthiness directive (AD), which applies to certain Boeing Model 757 series airplanes. That AD currently requires revising the Airworthiness Limitations section of the maintenance manual (757 Airworthiness Limitations Instructions (ALI)) to incorporate certain inspections and compliance times to detect fatigue cracking of principal structural elements (PSEs). This new AD requires incorporating a new revision to the Airworthiness Limitations section of the Instructions of Continued Airworthiness to mandate certain repetitive inspections for fatigue cracking of PSEs, and adds airplanes to the applicability in the existing AD. This AD results from a new revision to the ALI. We are issuing this AD to ensure that fatigue cracking of various PSEs is detected and corrected; such fatigue cracking could adversely affect the structural integrity of these airplanes.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-120, -120ER, -120FC, -120QC, and -120RT Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-120, -120ER, -120FC, -120QC, and -120RT airplanes. This AD requires replacing the de-icing system ejector flow control valves with new, improved control valves having hermetically sealed switches; and rewiring applicable connectors. This AD results from a fuel system review conducted by the manufacturer. We are issuing this AD to prevent a potential source of ignition near a fuel tank, which, in combination with flammable fuel vapors, could result in a fuel tank explosion and consequent loss of the airplane.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
