Department of Transportation March 14, 2006 – Federal Register Recent Federal Regulation Documents
Results 1 - 11 of 11
Freeport McMoRan Energy L.L.C. Main Pass Energy Hub Liquefied Natural Gas Deepwater Port License Application; Final Application Public Hearings and Final Environmental Impact Statement
The Maritime Administration (MARAD) announces the availability of the final environmental impact statement (FEIS) on the Main Pass Energy Hub (MPEH) Deepwater Port License Application. Also, public hearings will be held on matters relevant to the approval or denial of the license application. The application describes a project that would be located in the Gulf of Mexico in Main Pass Lease Block 299 (MP 299), approximately 16 miles southeast of Venice, Louisiana.
Airworthiness Directives; Bombardier Model BD-100-1A10 Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier Model BD-100-1A10 airplanes. This proposed AD would require an inspection for signs of arcing or heat damage of the electrical connections of the terminal blocks, ground studs, and the end of the wires and surrounding insulation for the windshield and side window anti-ice systems; and repairing any arced or damaged electrical connection. This proposed AD also would require re-torquing electrical connections of the terminal blocks and ground studs for the windshield and side window anti-ice systems. This proposed AD results from an in- service incident involving smoke and odor in the cockpit. We are proposing this AD to prevent loose electrical connections that could arc and overheat, and cause wiring damage of the windshield and side window anti-ice systems. Such wiring damage could result in smoke and/ or fire in the flight compartment.
Airworthiness Directives; McDonnell Douglas Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD-83), DC-9-87 (MD-87), and MD-88 Airplanes
This document revises an earlier proposed airworthiness directive (AD), applicable to certain McDonnell Douglas airplane models, that would have required a one-time inspection for chafing or signs of arcing of the wire bundle for the auxiliary hydraulic pump, and other specified and corrective actions, as applicable. This new action revises the proposed rule by proposing that certain airplanes be required to install additional protective sleeving on the upper portion of the auxiliary hydraulic pump wire assembly. The proposed AD results from reports of shorted wires and evidence of arcing on the power cables of the auxiliary hydraulic pump, as well as fuel system reviews conducted by the manufacturer. We are proposing this AD to prevent shorted wires or arcing at the auxiliary hydraulic pump, which could result in loss of auxiliary hydraulic power, or a fire in the wheel well of the airplane. The proposed actions are also intended to reduce the potential of an ignition source adjacent to the fuel tanks, which, in combination with flammable fuel vapors, could result in a fuel tank explosion and consequent loss of the airplane.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) EMB-120() Airplane Models in Operation
The FAA proposes to adopt a new airworthiness directive (AD) for all Empresa Brasileira de Aeronautica S.A. (EMBRAER) EMB-120() airplane models in operation. This proposed AD would require replacing the protective tubes and conduits of the wiring harnesses of the refueling vent and pilot valves with non-conductive hoses; modifying the harness wiring and supports; and rerouting the harnesses to prevent interference with adjacent strobe light connectors; as applicable. This proposed AD results from a fuel system review conducted by the manufacturer. We are proposing this AD to prevent a potential source of ignition near a fuel tank, which, in combination with flammable fuel vapors, could result in a fuel tank explosion.
Airworthiness Directives; Boeing Model 747-400 and 747-400D Series Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Boeing Model 747-400 and 747-400D series airplanes. This proposed AD would require replacing specified tie rods of the center overhead stowage bins. This proposed AD results from manufacturer analysis of the overhead storage bin support structure that demonstrated that the capability of certain existing tie rods does not meet emergency landing load requirements. We are proposing this AD to prevent disintegration or detachment of the center overhead stowage bins during an extreme forward load event, which could cause injury to passengers and hinder emergency evacuation procedures.
Airworthiness Directives; Boeing Model 747 Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Boeing Model 747 airplanes. This proposed AD would require repetitive mid- and low-frequency eddy current inspections for cracks in the overlapped skin panels in the fuselage skin lap joints in sections 41, 42, 44, and 46, and corrective actions if necessary. This proposed AD is prompted by a report indicating that an operator found multiple small cracks in the overlapped skin panels in the fuselage skin lap joints. We are proposing this AD to detect and correct cracks in the overlapped skin panels, which could join together and result in reduced structural capability in the skin and consequent rapid decompression of the airplane.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by Public Law 105-383 and Public Law 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket 2006-24124 at https:// dms.dot.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Public Law 105-383 and MARAD's regulations at 46 CFR part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by Public Law 105-383 and Public Law 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket 2006x-24125 at https:// dms.dot.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Public Law 105-383 and MARAD's regulations at 46 CFR part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by Public Law 105-383 and Public Law 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket 2006-24123 at https:// dms.dot.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Public Law 105-383 and MARAD's regulations at 46 CFR part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.
Request for Public Comments and Office of Management and Budget (OMB) Approval of an Existing Information Collection (2137-0610)
This notice requests public participation in the Office of Management and Budget (OMB) approval process for the renewal of an existing PHMSA information collection. In compliance with the Paperwork Reduction Act of 1995, this notice announces that the Information Collection Request (ICR) described below has been forwarded to OMB for extension of the currently approved collection. The ICR describes the nature of the information collection and the expected burden. PHMSA published a Federal Register Notice soliciting comments on the following information collection and received none. The purpose of this notice is to allow the public an additional 30 days from the date of this notice to submit comments.
Airworthiness Directives; Eurocopter France Model EC 155B and B1 Helicopters
This amendment adopts a new airworthiness directive (AD) for the specified Eurocopter France (ECF) model helicopters that requires inspecting an electrical cable bundle for wear. If wear is present, the AD requires installing an airworthy cable bundle and modifying the routing of the electrical cable bundles. This amendment is prompted by reports of a short circuit in the wiring, which led to failure of the normal and emergency landing gear operation modes. The actions specified by this AD are intended to prevent interference of the wiring with the structure resulting in an electrical short circuit, failure of the landing gear to extend, and an emergency landing.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.