Department of Transportation February 7, 2006 – Federal Register Recent Federal Regulation Documents
Results 1 - 4 of 4
Airworthiness Directives; Short Brothers Model SD3-60 SHERPA, SD3-SHERPA, and SD3-60 Airplanes
The FAA is superseding an existing airworthiness directive (AD), which applies to all Short Brothers Model SD3-60 and SD3-SHERPA airplanes. That AD currently requires an inspection of the fork end of the rear pintle pin on each main landing gear (MLG) to verify that sealant is properly applied and is undamaged, and related investigative/corrective actions if necessary. This new AD requires an additional inspection for correctly applied sealant on the MLG rear pintle pin assemblies, and related investigative/corrective actions if necessary. This AD also expands the applicability of the existing AD. This AD results from a new report of a cracked pintle pin fork end. We are issuing this AD to prevent stress-corrosion cracking and subsequent failure of the MLG.
Airworthiness Directives; Aero Advantage ADV200 Series (Part Numbers ADV211CC and ADV212CW) Vacuum Pumps
The FAA adopts a new airworthiness directive (AD) for all airplanes equipped with Aero Advantage ADV200 series (part numbers ADV211CC and ADV212CW) vacuum pumps installed under supplemental type certificate number SA10126SC, through field approval, or other methods. This AD requires you to remove from service any affected vacuum pump and install an FAA-approved vacuum pump other than the affected part numbers. This AD results from several reports of pump chamber failure. We are issuing this AD to prevent vacuum pump failure or malfunction during instrument flight rules (IFR) flight that could lead to loss of flight instruments critical for flight. The loss of flight instruments could cause pilot disorientation and loss of control of the aircraft.
Office of Hazardous Materials Safety; Notice of Delays in Processing of Special Permit Applications
In accordance with the requirements of 49 U.S.C. 5117(c), PHMSA is publishing the following list of special permit applications that have been in process for 180 days or more. The reason(s) for delay and the expected completion date for action on each application is provided in association with each identified application.
Proposed Grant of Exemption; Ameriflight, Inc.
This notice contains the text of a proposed grant of exemption from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of the FAA's regulatory activities. Neither publication or this notice nor the inclusion or omission of information in the text of the proposed exemption is intended to affect the legal status of the petition or its final disposition.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
