Department of Transportation January 9, 2006 – Federal Register Recent Federal Regulation Documents
Results 1 - 5 of 5
Proposed Establishment of VOR Federal Airway V-623; NJ and NY
This action proposes to establish Very High Frequency Omnidirectional Range (VOR) Federal Airway V-623 between the Sparta, NJ, Very High Frequency Omnidirectional Range Tactical Air Navigation (VORTAC) and the Carmel, NY, Very High Frequency Omnidirectional Range/ Distance Measuring Equipment (VOR/DME). The purpose of the proposed airway is to enhance the management of air traffic transiting from the New England area to airports in the Newark, NJ, area.
Proposed Establishment of Area Navigation Instrument Flight Rules Terminal Transition Route (RITTR) T-210; Jacksonville, FL
This action proposes to establish an Area Navigation Instrument Flight Rules Terminal Transition Route (RITTR), designated T-210, in the Jacksonville, FL, terminal area. The purpose of RITTR is to expedite the handling of Instrument Flight Rules (IFR) overflight aircraft through busy terminal airspace areas. The FAA is proposing this action to enhance the safe and efficient use of the navigable airspace in the Jacksonville, FL, terminal area.
Standard Instrument Approach Procedures, Weather Takeoff Minimums; Miscellaneous Amendments
This amendment establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and/or Weather Takeoff Minimums for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, addition of new obstacles, or changes in air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Airworthiness Directives; American Champion Aircraft Corporation Models 7AC, 7ACA, S7AC, 7BCM, 7CCM, S7CCM, 7DC, S7DC, 7EC, S7EC, 7ECA, 7FC, 7GC, 7GCA, 7GCAA, 7GCB, 7GCBA, 7GCBC, 7HC, 7JC, 7KC, 7KCAB, 8KCAB, and 8GCBC Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain American Champion Aircraft Corporation (ACAC) Models 7AC, 7ACA, S7AC, 7BCM, 7CCM, S7CCM, 7DC, S7DC, 7EC, S7EC, 7ECA, 7FC, 7GC, 7GCA, 7GCAA, 7GCB, 7GCBA, 7GCBC, 7HC, 7JC, 7KC, 7KCAB, 8KCAB, and 8GCBC airplanes. This AD requires you to make a temporary Pilot's Operating Handbook (POH) limitation entry or install a temporary placard prohibiting aerobatic flight if you operate the airplane before the required inspection of this AD; inspect for incorrect swaging width of the cable Nicopress sleeves on the elevator, rudder, aileron, and flap control cables; replace cables that have incorrect sleeve swage width; remove POH limitation or placard prohibiting aerobatic flight after inspection and replacement of cables with incorrect sleeve swage width; and report any findings of incorrect sleeve swage width to FAA. This AD results from partial loss of aileron control because an incorrectly swaged cable sleeve allowed the cable to slip. We are issuing this AD to detect and correct incorrect swaging widths of the flight control cable Nicopress sleeves, which could result in failure of the elevator, rudder, aileron, and flap controls. This failure could lead to loss of control of the airplane.
Notice of Delays in Processing of Special Permit Applications
In accordance with the requirements of 49 U.S.C. 5117(c), PHMSA is publishing the following list of special permit applications that have been in process for 180 days or more. The reason(s) for delay and the expected completion date for action on each application is provided in association with each identified application.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
