Department of Transportation December 6, 2005 – Federal Register Recent Federal Regulation Documents

The FAA proposes to adopt a new airworthiness directive (AD) for certain McDonnell Douglas Model DC-9-10, DC-9-20, DC-9-30, DC-9-40, and DC-9-50 series airplanes. This proposed AD would require repetitive inspections for stress corrosion cracks of the main fuselage frame, and corrective actions if necessary. This proposed AD also would provide an optional terminating action for the repetitive inspections. This proposed AD results from several reports of cracking of the main fuselage frame. We are proposing this AD to detect and correct stress corrosion cracking of the main fuselage frame, which could result in extensive damage to adjacent structure, and reduced structural integrity of the airplane.

The FHWA is issuing this notice to advise the public that an environmental impact statement will be prepared for the proposed extension of SR-357 in Sullivan County, Tennessee.

The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 737-600, -700, -700C, and -800 series airplanes. This AD requires replacing the point ``D'' splice fitting between windows number 1 and 2 with a new splice fitting, performing an eddy current inspection for cracking of the holes in the structure common to the new splice fitting, including doing any related investigative actions; and corrective actions if necessary. This AD results from full-scale fuselage fatigue testing on the splice fitting that failed prior to the design objective on Boeing Model 737-800 series airplanes, and a report of a cracked splice fitting on an operational airplane. We are issuing this AD to prevent cracking of the existing fitting that may result in cracking through the skin and consequent decompression of the flight cabin.