Department of Transportation August 15, 2005 – Federal Register Recent Federal Regulation Documents
Results 1 - 7 of 7
Determination of Availability of Coastwise-Qualified Launch Barges
The Maritime Administration (MARAD, we, our, or us) is publishing this proposed rulemaking to establish regulations governing administrative determinations of availability of coastwise-qualified launch barges to be used in the transportation and launching of offshore oil drilling or production platform jackets in specified projects. This rulemaking implements provisions of the Coast Guard and Maritime Transportation Act of 2004, which, among other things, requires the Secretary of Transportation (acting through the Maritime Administrator) to adopt procedures to determine if coastwise-qualified vessels are available for platform jacket transport and launching, and, if not, to allow the use of non-coastwise qualified foreign built vessels.
Information Collection Available for Public Comments and Recommendations
In accordance with the Paperwork Reduction Act of 1995, this notice announces the Maritime Administration's (MARAD's) intention to request extension of approval for three years of a currently approved information collection.
Airworthiness Directives; Gulfstream Model G-IV, GIV-X, GV, and GV-SP Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Gulfstream Model G-IV and GV series airplanes, and certain GIV-X and GV-SP series airplanes. This AD requires a one-time inspection to determine if a certain floor heater pad system is installed, and deactivation of the subject floor heater pad system if it is installed. This AD results from an incident of short-circuiting of the floor heater pads, in which no circuit breakers tripped in response to the short-circuiting. We are issuing this AD to prevent short-circuiting of the floor heater pad system, which could result in a fire in the airplane cabin.
Airworthiness Directives; Gulfstream Aerospace LP Model Galaxy and Gulfstream 200 Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Gulfstream Aerospace LP Model Galaxy and Gulfstream 200 airplanes. This AD requires a one-time general visual inspection for any damaged wiring, splice, connector, and pins for the fuel standby feed pumps and replacement of any damaged wiring, splice, connector, or pin. This AD also requires replacement of the power and ground wires for the fuel standby feed pumps. This AD results from reports of evidence of overheating found on the feeder wires of the left and right fuel standby feed pumps. We are issuing this AD to detect and correct damaged wiring for the fuel standby feed pumps, which could result in an ignition source in an area where fuel vapor may be present, and a consequent fire or explosion.
Airworthiness Directives; Pilatus Aircraft Ltd. Models PC-6, PC-6-H1, PC-6-H2, PC-6/350, PC-6/350-H1, PC-6/350-H2, PC-6/A, PC-6/A-H1, PC-6/A-H2, PC-6/B-H2, PC-6/B1-H2, PC-6/B2-H2, PC-6/B2-H4, PC-6/C-H2, and PC-6/C1-H2 Airplanes
The FAA adopts a new airworthiness directive (AD) for all Pilatus Aircraft Ltd. (Pilatus) (also identified as Fairchild Republic Company and Fairchild Heli Porter) Model PC-6 airplanes. This AD requires you to repetitively inspect the stabilizer-trim attachment and structural components for cracks, corrosion, and discrepancies and replace any defective part with a new part. This AD also requires you to replace all Fairchild connecting pieces, part number (P/N) 6232.0026.XX, with a Pilatus connecting piece and requires you to replace fittings without an index after the P/N with an improved part. This AD results from mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Switzerland. We are issuing this AD to detect and correct defective stabilizer-trim attachments and surrounding structural components, which could result in failure of the stabilizer-trim attachment. This failure could lead to loss of control of the airplane.
Parts and Accessories Necessary for Safe Operation; General Amendments
FMCSA amends part 393 of the Federal Motor Carrier Safety Regulations (FMCSRs), Parts and Accessories Necessary for Safe Operation. The amendments are intended to remove obsolete and redundant regulations; respond to several petitions for rulemaking; provide improved definitions of vehicle types, systems, and components; resolve inconsistencies between part 393 and the National Highway Traffic Safety Administration's Federal Motor Vehicle Safety Standards (49 CFR part 571); and codify certain FMCSA regulatory guidance concerning the requirements of part 393. Generally, the amendments do not involve the establishment of new or more stringent requirements, but a clarification of existing requirements. This action is intended to make many sections more concise, easier to understand and more performance oriented.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.