Department of Commerce April 13, 2007 – Federal Register Recent Federal Regulation Documents
Results 1 - 15 of 15
Steel Concrete Reinforcing Bar from The Republic of Korea: Notice of Final Results and Final Partial Rescission of Antidumping Duty Administrative Review
On October 10, 2006, the Department of Commerce published the preliminary results of the 2004 - 2005 administrative review of the antidumping duty order on steel concrete reinforcing bars from the Republic of Korea. The period of review (POR) is September 1, 2004, through August 31, 2005. Based on our analysis of the comments received, we have not made changes in the margin calculations for the companies covered by this review. Therefore, the final results do not differ from the preliminary results. The final weighted-average dumping margins for the reviewed firms are listed below in the section entitled ``Final Results of Review.'' Furthermore, we are rescinding this review with respect to Hanbo Iron & Steel Co., Ltd. (Hanbo), INI Steel (INI) and Kosteel Co., Ltd. (Kosteel), as discussed below in the section entitled ``Partial Rescission of Review.''
Certain Forged Stainless Steel Flanges from India: Notice of Final Results of New Shipper Review
On January 31, 2007, the Department of Commerce (the Department) published the preliminary results of new shipper review of the antidumping duty order on certain forged stainless steel flanges from India. See Certain Forged Stainless Steel Flanges From India; Preliminary Results of New Shipper Review, 72 FR 4483 (January 31, 2007) (Preliminary Results). This new shipper review covers Kunj Forgings, Pvt., Ltd. (Kunj), a manufacturer and exporter of the subject merchandise. The period of review is February 1, 2005, through January 31, 2006. We did not receive any comments from parties, and we have not made any changes to our analysis. The final weighted-average dumping margin for Kunj is thus unchanged from our preliminary results of review, and is shown in the section entitled ``Final Results of Review.''
National Fire Codes: Request for Proposals for Revision of Codes and Standards
The National Fire Protection Association (NFPA) proposes to revise some of its fire safety codes and standards and requests proposals from the public to amend existing or begin the process of developing new NFPA fire safety codes and standards. The purpose of this request is to increase public participation in the system used by NFPA to develop its codes and standards. The publication of this notice of request for proposals by the National Institute of Standards and Technology (NIST) on behalf of NFPA is being undertaken as a public service; NIST does not necessarily endorse, approve, or recommend any of the standards referenced in the notice. The NFPA process provides ample opportunity for public participation in the development of its codes and standards. All NFPA codes and standards are revised and updated every three to five years in Revision Cycles that begin twice each year and that takes approximately two years to complete. Each Revision Cycle proceeds according to a published schedule that includes final dates for all major events in the process. The process contains five basic steps that are followed both for developing new documents as well as revising existing documents. These steps are: Calling for Proposals; Publishing the Proposals in the Report on Proposals (ROP); Calling for Comments on the Committee's disposition of the proposals and these Comments are published in the Report on Comments (ROC); having a Technical Report Session at the NFPA Annual Meeting; and finally, the Standards Council Consideration and Issuance of documents.
National Fire Codes: Request for Comments on NFPA Technical Committee Reports
Since 1896, the National Fire Protection Association (NFPA) has accomplished its mission by advocating scientifically based consensus codes and standards, research, and education for safety related issues. NFPA's National Fire Codes[supreg], which holds over 270 documents, are administered by more than 225 Technical Committees comprised of approximately 7,000 volunteers and are adopted and used throughout the world. NFPA is a nonprofit membership organization with approximately 80,000 members from over 70 nations, all working together to fulfill the Association's mission. The NFPA process provides ample opportunity for public participation in the development of its codes and standards. All NFPA codes and standards are revised and updated every three to five years in Revision Cycles that begin twice each year and that take approximately two years to complete. Each Revision Cycle proceeds according to a published schedule that includes final dates for all major events in the process. The process contains five basic steps that are followed both for developing new documents as well as revising existing documents. These steps are: Calling for Proposals; Publishing the Proposals in the Report on Proposals (ROP); Calling for Comments on the Committee's disposition of the Proposals and these Comments are published in the Report on Comments (ROC); having a Technical Report Session at the NFPA Annual Meeting; and finally, the Standards Council Consideration and Issuance of documents.
Advanced Technology Program Advisory Committee
Pursuant to the Federal Advisory Committee Act, 5 U.S.C. app. 2, notice is hereby given that the Advanced Technology Program Advisory Committee, National Institute of Standards and Technology (NIST) will meet Tuesday, May 15, 2007 from 8:30 a.m. to 3 p.m. The Advanced Technology Program Advisory Committee is composed of ten members appointed by the Director of NIST who are eminent in such fields as business, research, new product development, engineering, education, and management consulting. The purpose of this meeting is to review and make recommendations regarding general policy for the Advanced Technology Program (ATP), its organization, its budget, and its programs within the framework of applicable national policies as set forth by the President and the Congress. The agenda will include an ATP Update and a presentation on ``The Data Enclave.'' A discussion scheduled to begin at 11 a.m. and to end at 3 p.m. on May 15, 2007, on ATP budget issues will be closed. Agenda may change to accommodate Committee business.
Petroleum Wax Candles from the People's Republic of China: Notice of Rescission of Antidumping Duty New Shipper Review
On March 28, 2007, the Department of Commerce (``the Department'') published in the Federal Register a notice announcing the initiation of a new shipper review of the antidumping duty order on petroleum wax candles from the People's Republic of China (``PRC'') for Hangzhou Fashion Living Co., Ltd (``Fashion Living''). See Petroleum Wax Candles from the People's Republic of China: Initiation of New Shipper Review, 72 FR 14,521 (March 28, 2007) (``Fashion Living Initiation''). The period of review (``POR'') is August 1, 2006, to January 31, 2007. This review is now being rescinded because Fashion Living withdrew its request in a timely manner.
Fisheries of the Exclusive Economic Zone Off Alaska; Reallocation of Pacific Cod in the Bering Sea and Aleutian Islands Management Area
NMFS is reallocating the projected unused amount of Pacific cod from vessels using jig gear to catcher vessels less than 60 feet (18.3 meters (m)) length overall (LOA) using pot or hook-and-line gear in the Bering Sea and Aleutian Islands management area (BSAI). These actions are necessary to allow the 2007 B season total allowable catch (TAC) of Pacific cod to be harvested.
Gulf of Mexico Fishery Management Council; Public Meetings
The Gulf of Mexico Fishery Management Council (Council) will convene its Socioeconomic Panel (SEP).
Gulf of Mexico Fishery Management Council; Public Meeting
The Gulf of Mexico Fishery Management Council (Council) will convene via Conference Call in a closed session to select members to an Ad Hoc Recreational Red Snapper Advisory Panel, the Ecosystem Scientific and Statistical Committee, and an Ad Hoc Red Drum Scientific Review Panel.
Endangered Species; File No. 1604
Notice is hereby given that the U.S. Fish and Wildlife Service (Dr. Chester Figiel, Principal Investigator), 5308 Spring Street, Warm Springs, GA 31830, has applied in due form for a permit to take shortnose sturgeon (Acipenser brevirostrum) for purposes of enhancement and scientific research.
Endangered and Threatened Wildlife and Plants: 90-Day Finding for a Petition to List Black Abalone as Threatened or Endangered under the Endangered Species Act
We, the NMFS, have received a petition to list the black abalone (Haliotis cracherodii) as a threatened or endangered species and to designate critical habitat under the Endangered Species Act (ESA). We find that the petition presents substantial scientific information indicating that the petitioned action may be warranted. This finding normally initiates a formal status review, but as described below in the Background section (see SUPPLEMENTARY INFORMATION), in this case, we had already initiated a formal status review on October 17, 2006. To ensure that the review is comprehensive, we are soliciting information pertaining to this species, any potential critical habitat, and recommendations of qualified individuals to peer review the agency's black abalone status review report.
Fisheries of the Caribbean, Gulf of Mexico, and South Atlantic; Reef Fish Fishery of the Gulf of Mexico; Closure of the 2007 Gulf of Mexico Commercial Fishery for Tilefishes
NMFS closes the commercial fishery for tilefishes in the exclusive economic zone (EEZ) of the Gulf of Mexico. NMFS has determined that the quota for tilefishes for the commercial fishery will have been reached by April 18, 2007. This closure is necessary to protect tilefishes.
Innovation Measurement
The Department of Commerce is seeking public comment on issues related to the measurement of innovation. This request supports efforts of the Measuring Innovation in the 21st Century Economy Advisory Committee to collect seek advice from the public as it prepares recommendations for the Secretary of Commerce on new or improved measures of business innovation.
Fisheries of the Northeastern United States; Atlantic Mackerel, Squid, and Butterfish Fisheries; Closure of the Trimester I Fishery for Loligo Squid
NMFS announces that the directed fishery for Loligo squid in the Exclusive Economic Zone (EEZ) will be closed effective 0001 hours, April 13, 2007. Vessels issued a Federal permit to harvest Loligo squid may not retain or land more than 2,500 lb (1,134 kg) of Loligo squid per trip for the remainder of the trimester (through April 30, 2007). This action is necessary to prevent the fishery from exceeding its Trimester I quota and to allow for effective management of this stock.
Fisheries of the Exclusive Economic Zone Off Alaska; Rock Sole, Flathead Sole, and “Other Flatfish” by Vessels Using Trawl Gear in Bering Sea and Aleutian Islands Management Area
NMFS is closing directed fishing for rock sole, flathead sole, and ``other flatfish'' by vessels using trawl gear in the Bering Sea and Aleutian Islands management area (BSAI). This action is necessary to prevent exceeding the second seasonal allowance of the 2007 halibut bycatch allowance specified for the trawl rock sole, flathead sole, and ``other flatfish'' fishery category in the BSAI.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.